Procedure 3 Diagnostic Test Program Execution Check; Procedure 4 Replacement Check - Toshiba QOSMIO G50 Maintenance Manual

2 Troubleshooting Procedures
Procedure 3
Execute the following tests from the Diagnostic Test Menu. These tests check the system
board. Refer to Chapter 3, Tests and Diagnostic, for more information on how to perform
these tests.
1. System test
2. Memory test
3. Keyboard test
4. Display test
5. Floppy Disk test
6. Printer test
7. Async test
8. Hard Disk test
9. Real Timer test
10. NDP test
11. Expansion test
12. CD-ROM/DVD-ROM test
13. Only One test
14. Wireless LAN test
15. LAN/Modem/Bluetooth/IEEE1394 test
16. Sound test
If an error is detected during these tests, go to Procedure 4.
Procedure 4
System board may be faulty. Disassemble the computer following the steps described in
Chapter 4, Replacement Procedures and replace system board with a new one.
2-30
Downloaded from LpManual.com Manuals
Diagnostic Test Program Execution Check
[It is not supported]
[It is not supported]
Replacement Check
[CONFIDENTIAL]
2.4 System Board Troubleshooting
QOSMIO G50 Maintenance Manual (960-683)