Page 1 Series User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 247 in this guide. “If Something Goes Wrong” on...
Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3: Critical Applications
Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
This device may not cause harmful interference. ❖ This device must accept any interference received, including interference that may cause undesired operation. Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6: Instructions For Ic Cs-03 Certified Equipment
provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9: Europe - Eu Declaration Of Conformity
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à...
Page 10 Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Page 11: Usa - Federal Communications Commission (Fcc)
Caution: Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 12: Using This Equipment In Japan
Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Page 13: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 14: Radio Approvals For Wireless Devices
Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only Radio approvals for wireless devices NOTE The following information is dependent on what type of wireless device is in...
Page 15 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 17 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 18 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 19: Bluetooth Wireless Technology Interoperability
New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
Page 20: Bluetooth Wireless Technology And Your Health
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...
Page 21: Regulatory Statements
community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization.
Page 22 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 23 Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications. In event that any interference is found, the use of such electric machinery shall be stopped immediately, and reusing of such products can be resumed until no interference occurs after improvement.
Page 24 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 25: Export Administration Regulation
Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 26 ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Page 27 MultiMediaCard is a trademark of Infineon Technologies AG. All other brand and product names are trademarks or registered trademarks of their respective companies. Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 28: Table Of Contents
Other precautions ...46 Important information on your computer’s Setting up your computer ...49 Setting up your software...49 Registering your computer with Toshiba ...51 Adding external devices ...51 Connecting to a power source ...52 Charging the main battery...55 cooling fan ...48...
Page 29 Using the computer for the first time ...56 Opening the display panel ...56 Your computer’s features and specifications ...57 Turning on the power ...57 Using the TouchPad™...59 Scrolling with the TouchPad™ ...59 Using the Scroll button ...60 Using the Control buttons ...60 Disabling or enabling the TouchPad ...60 Installing additional memory (optional) ...62 Removing a memory module...66...
Page 30 Contents Chapter 2: Learning the Basics... 84 Computing tips ...84 Using the keyboard ...86 Character keys ...86 Making your keyboard emulate a full-size Ctrl, Fn, and Alt keys ...87 Function keys...87 Windows® special keys ...88 Overlay keys ...88 Using the overlay to type numeric data...89 Starting a program...90 Starting a program from the Start menu...90 Starting a program from Windows...
Page 31 Using Standby Mode...111 Toshiba’s online resources ...114 Chapter 3: Mobile Computing... 115 Toshiba’s energy-saver design...115 Running the computer on battery power ...115 Battery Notice ...116 Power management ...117 Using additional batteries ...117 Charging the batteries...118 Charging the main battery...118 Charging the RTC battery...119 Monitoring battery power ...120...
Page 32 Contents Connecting your computer to a network ...140 An overview of using the Internet ...144 The Internet ...144 The World Wide Web ...144 Internet Service Providers...145 Connecting to the Internet ...145 Surfing the Internet...146 Internet features...146 Uploading and downloading files from Exploring audio features ...147 Recording sounds...147 Using external speakers or headphones...150...
Page 33 Installing the QosmioPlayer Recovery media ...168 Chapter 5: Getting to Know the Windows Edition 2005... 169 Media Center Setup...170 Connecting to a Television ...170 Connecting the TV Signal Source When Starting the Media Center ...174 Using Media Center...181 Remote Control For Media Center...183 Watching Television Programs ...189 Selecting a Program from the TV Guide...191 Watching a Recorded TV Program...192...
Page 34 Playing a DVD movie already in your drive ...216 Changing the Media Center Settings ...217 More Programs...226 Online Spotlight ...227 Getting Help for Media Center...228 Chapter 6: Toshiba Utilities... 229 Fn-esse Starting Fn-esse Using the keyboard or pointing device to Viewing existing key assignments...233 Changing or removing existing key TOSHIBA Console ...234...
Page 35 Modem problems...269 Develop good computing habits ...270 If you need further assistance...271 Before you call ...271 Contacting Toshiba ...272 Other Toshiba Internet Web sites ...273 Toshiba’s worldwide offices...273 ® operating system is not working ..250 ® XP operating system can help you ...252...
Page 36 Display brightness ...280 Disabling or enabling the TouchPad ...281 Keyboard hot keys ...281 Appendix B: Power Cord/Cable Connectors... 282 Appendix C: Using ConfigFree™ with your Toshiba Computer... 283 Getting Started...284 Starting ConfigFree ...284 ConfigFree Utilities...285 Connectivity Doctor ...285 Search for Wireless Devices ...288 Profile Settings ...290...
Page 37: Introduction
Introduction Welcome to the world of powerful, portable multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you Qosmio™ G15 Series computers provide considerable computing power, enabling you to perform the most demanding computing tasks from any location.
Page 38: This Guide
Toshiba's Web site at While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 39: Safety Icons
Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 40: Other Icons Used
Guides for other programs that may come preinstalled on your computer or that are available for installation on your Recovery media (If applicable to your system). ❖ For accessory information, visit Toshiba's Web site at accessories.toshiba.com. ❖ The Microsoft documentation, which explains the features of the operating system.
Page 41: Service Options
Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page...
Page 42: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.
Page 43: Keeping Yourself Comfortable
❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than the speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Page 44 Getting Started Selecting a place to work Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer. ❖ Place the computer on a flat surface at a comfortable height and distance.
Page 45 If you are using a conventional chair: ❖ Your knees should be slightly higher than your hips. If necessary, use a footrest to raise the level of your knees and ease the pressure on the back of your thighs. ❖ Adjust the back of your chair so that it supports the lower curve of your spine.
Page 46: Work Habits
Getting Started Selecting a place to work ❖ Exercise your hands, wrists and arms to improve circulation. Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day.
Page 47 touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, for example), your skin might suffer low-heat injury. Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is being used.
Page 48: Important Information On Your Computer's Cooling Fan
Getting Started Selecting a place to work This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus. You will need a special program to check for viruses.
Page 49: Setting Up Your Computer
Setting up your computer TECHNICAL NOTE: You must complete all set up steps up to “Setting up your software” on page 49 or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards.
Page 50 A window displays, asking if you wish to register with Toshiba and Microsoft. Click Yes to register, or No to exit the process. If you click No, you may register with Toshiba by clicking the NOTE Register with Toshiba icon on the desktop.
Page 51: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 52: Connecting To A Power Source
Getting Started Connecting to a power source ❖ Connect a microphone (there is also an internal microphone) (see ❖ Connect a digital or plasma TV (see digital or plasma television or VCR/DVD player” on page ❖ Connecting a standard TV antenna (see standard television, projector, or VCR/DVD player”...
Page 53 Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 54 Getting Started Connecting to a power source Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Plug the AC adapter cord into the DC-IN on the back of the computer.
Page 55: Charging The Main Battery
If the main battery is present, the battery light ❖ Amber while the battery is charging ❖ Green when the battery is fully charged If the battery light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving input from the AC power supply.
Page 56: Using The Computer For The First Time
Getting Started Using the computer for the first time Battery life and charge time may vary depending on the NOTE applications, power management settings, and features used. Using the computer for the first time Opening the display panel Slide the display latch to the right and lift the display panel Sample opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily.
Page 57: Your Computer's Features And Specifications
Over a period of time, and depending on the usage of the NOTE computer, the brightness of the LCD Screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode. Screen will dim when the computer is operated on battery power and you will not be able to increase the brightness of the screen.
Page 58 Getting Started Using the computer for the first time Press and hold the power button until the on/off light on the system indicator panel glows green—approximately one second. An indicator light on the front of your computer lets you know the system indicator status when the display is closed. When you turn on the computer for the first time, do not turn NOTE off the power again until the operating system has loaded...
Page 59: Using The Touchpad
Using the TouchPad The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you would like to move the cursor: ❖...
Page 60: Using The Scroll Button
Getting Started Using the TouchPad™ Using the Scroll button For applicable systems, the scroll button, located between the primary and secondary control buttons on the TouchPad, is used for rapid viewing of pages on the screen. Using the Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button.
Page 61 Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window. The Fn + F9 shortcut can be used to disable or enable the NOTE TouchPad (see page...
Page 62: Installing Additional Memory (Optional)
Toshiba Web site at accessories.toshiba.com). There are two memory slots. Your system may have both slots occupied.
Page 63 Installing additional memory (optional) If the computer is on, click Start, then click Turn off computer. See “Using the Turn off command” on page 107 for more information. The Turn off computer window appears. Click Turn Off. The operating system turns off the computer. Unplug and remove any cables connected to the computer.
Page 64 Getting Started Installing additional memory (optional) Sample removing the memory module slot cover Place the memory module slot cover in a safe place so that you can retrieve it later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 65 Installing additional memory (optional) Sample inserting the memory module into the slot The clips on either side of the memory module click to secure the memory module. Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems.
Page 66: Removing A Memory Module
Getting Started Installing additional memory (optional) Removing a memory module Complete steps (optional)’” to shut down the computer and open the memory module cover. Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Standby mode.
Page 67 Installing additional memory (optional) Sample removing the memory module Replace the memory module slot cover and fasten the screw. Turn the computer over and restart it. Checking total memory When you add or remove memory, you can check that the computer has recognized the change.
Page 68: Using An External Keyboard
Getting Started Using an external keyboard Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s USB port supports any USB- compatible keyboard. Using a mouse You may want to use a mouse instead of the computer’s built- in TouchPad.
Page 69: Setting Up Your Printer
Read the documentation that came with your printer. Follow NOTE the manufacturer’s instructions when connecting a local printer. You must supply the proper printer cable. If one did not come NOTE with your printer, you may purchase one from an electronics or computer store.
Page 70 Getting Started Connecting a local printer TECHNICAL NOTE: If you have the manufacturer’s disc that came with your printer, you can use it to install the printer on your computer. The manufacturer’s disc may include additional drivers and fonts. To set up a printer with the Add Printer Wizard: Click Start and then Printers and Faxes.
Page 71 Sample Add Printer Wizard dialog box Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows ® XP operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual for more information.
Page 72 Getting Started Connecting a local printer The wizard prompts you to select your printer. From the list of manufacturers and printers, select your printer, then click Next. The Add Printer Wizard prompts you to enter a “friendly” printer name. Enter a name for your printer. HINT: If you are using more than one printer, make sure the name is descriptive enough to help you tell the difference.
Page 73: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. Sample optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the USB ports.
Page 74: Connecting External Display Devices
Getting Started Connecting external display devices Connecting external display devices Your computer comes with a built-in LCD display, but you can also connect the following types of external display devices to the video ports described below: ❖ A plasma or digital television or VCR/DVD player via the Component Video Out port.
Page 75: Selecting Video Cables
S-video cable. For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor-quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 76 Getting Started Connecting external display devices Connect the three RCA jacks on the other end of the cable to your digital television. Refer to the manual that came with the television for more information. Turn on your computer. Set the display mode by pressing Display Properties settings.
Page 77: Directing The Display Output When You Turn On The Computer
TECHNICAL NOTE: If you are connecting to a television, you may need to change the display properties. Most televisions use or support an 800 x 600 standard resolution. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen or to display anything on your computer screen.
Page 78: Adjusting The Quality Of The External Display
Getting Started Connecting external display devices ❖ External monitor only ❖ Built-in display and TV (or other external video device) simultaneously ❖ TV (or other external video device) only Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box.
Page 79: Connecting External Av Input Devices
Connecting External AV Input Devices Your computer provides ports for connecting the following AV input devices: ❖ A Set-top box or standard television antenna via the coaxial Antenna In port. ❖ VCR/DVD player and game console devices via the S- video In port or the Composite In port.
Page 80: Turning Off The Computer
Getting Started Turning off the computer Refer to the documentation provided with the device for the location of its Video Out port. Connect the other end of the video cable to the S-video In port on the back of the computer. Turn on the external video device.
Page 81: Caring For Your Computer
To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. Caring for your computer “Powering down the computer” on 107.
Page 82: Closing The Display Panel
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer, through the accessories information packaged with your system, or visit accessories.toshiba.com...
Page 83: Using A Computer Lock
Using a computer lock For your own peace of mind, you may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional PORT-Noteworthy Computer Lock Cable. Sample PORT-Noteworthy To secure the computer: Loop the cable through or around some part of a heavy object.
Page 84: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 85 ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 86: Using The Keyboard
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 87: Ctrl, Fn, And Alt Keys
programs assign separate functions to the right and left keys, or to the regular and numeric pad the full-sized keyboard. Using the these separate keys, as follows: ❖ Press the right side of the enhanced keyboard. ❖ Press on the numeric pad of the enhanced keyboard. Ctrl, Fn, and Alt keys Ctrl Sample Ctrl, Fn, and Alt keys...
Page 88: Windows® Special Keys
Learning the Basics Using the keyboard ® Windows special keys Sample Windows Your computer’s keyboard has two keys that have special functions in Windows: ❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse button Overlay keys Sample numeric and cursor control overlay The keys with gray numbers and symbols on the front of...
Page 89: Using The Overlay To Type Numeric Data
Using the overlay to type numeric data To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 90: Starting A Program
Learning the Basics Starting a program To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options.
Page 91: Starting A Program From Windows Explorer
To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.
Page 92: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from the Run dialog box This example uses the Run command to start WordPad: Click Start, then click Run. The Run dialog box appears.
Page 93: Saving Your Work
Saving your work Before you turn off the computer, save your work to the hard disk drive. Always save your data even when you are using the Stand by. If your battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low, see Many programs offer a feature that saves documents at regular intervals, such as every 15 minutes.
Page 94: File Names
Learning the Basics Saving your work Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 95: Printing Your Work
Printing your work Verify that the Windows your printer as described in page TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s).
Page 96: Backing Up Your Files
Learning the Basics Backing up your files Backing up your files Backing up your files means copying individual files to media, such as CDs, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a writable CD-ROM drive or DVD- ROM multi-function drive, you may back up files to a writable disc as follows:...
Page 97: Using The Dvd-Rom Or Multi-Function Drive
Using the DVD-ROM or multi-function drive Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
Page 98: Drive Components And Control Buttons
Learning the Basics Using the DVD-ROM or multi-function drive Drive components and control buttons The DVD-ROM or multi-function drive is located on the right side of the computer. The Media control buttons are located above the keyboard and can be accessed when the display panel open.
Page 99: Media Control Buttons
Using the DVD-ROM or multi-function drive Media control buttons The control buttons above the computer keyboard let you play audio CDs when the computer is on. You can also use them to play CDs and DVDs when the computer is off using the QosmioPlayer application.
Page 100: Inserting A Disc
Learning the Basics Using the DVD-ROM or multi-function drive The Next track button skips to the following track on the disc. The Record button records television programs which are currently being viewed. The Brightness button adjusts the screen brightness. The Monitor In button is pressed to establish the connection with the external device.
Page 101 Using the DVD-ROM or multi-function drive Hold the disc by its edges and check that it is clean and free of dust. Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could lose data.
Page 102: Playing An Audio Cd
If you insert the disc incorrectly, it may jam the drive. If this happens, contact your Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 103 Using the DVD-ROM or multi-function drive Rewind Play Stop Previous track Next track Mute Sample Windows Media The CD Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button on the CD Player control panel.
Page 104: Playing Cds Using Auto-Run
Learning the Basics Using the DVD-ROM or multi-function drive Playing CDs using Auto-Run If you insert a CD into the DVD-ROM/multi-function drive and the Auto-Run feature does not automatically start your disk, try launching the CD manually. To do this, follow these steps: Open the Start menu and select My Computer.
Page 105: Viewing The Contents Of A Cd Or Dvd
Using the DVD-ROM or multi-function drive Viewing the contents of a CD or DVD CDs and DVDs contain files just like the hard disk. CDs are often used to install software or store files that require lots of space, such as photographs and large presentation files. You can use Explorer or My Computer to view the contents of any CD or DVD.
Page 106: Removing A Disc With The Computer Off
Learning the Basics Using the DVD-ROM or multi-function drive Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject button access hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 107: Powering Down The Computer
Powering down the computer Pushing the power button before shutting down the Windows operating system could cause you to lose your work. Make sure the system indicator panel’s disk light and the drive-in- use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/or drive.
Page 108 To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility. Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click on the Setup Action tab. Select the following from the drop-down lists. ❖...
Page 109: Using Hibernation Mode
Click OK. Sample system power mode settings For more information about the Power Saver utility, see NOTE “Power Saver” on page Starting again after Turn off To start the computer up again, press the power button until the on/off light changes to green. If you turned off the computer by closing the display panel, you can start it again by opening the display panel.
Page 110 Configuring your computer for Hibernation Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. ❖ When I press the power button Set this option to Hibernate so that the computer will go into Hibernation mode when you press the power button.
Page 111: Using Standby Mode
The computer is now set to automatically enter into Hibernation when your option settings occur. For more information about the Power Saver utility, see NOTE “Power Saver” on page Once the computer is configured, place the computer into Hibernation mode by either pressing the power button or closing the display panel, depending on the hibernation options selected.
Page 112 Learning the Basics Powering down the computer ❖ When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. If you power down using the Stand by and the battery discharges fully, your information will be lost.
Page 113 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Stand by for the options you want. ❖...
Page 114: Toshiba's Online Resources
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 115: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods of time while traveling.
Page 116: Battery Notice
Toshiba Web site at accessories.toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged.
Page 117: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries If you spend a lot of time traveling and need to work for many hours without an AC power source, you may want to carry additional charged batteries with you.
Page 118: Charging The Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet.
Page 119: Charging The Rtc Battery
The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature. ❖ The battery is almost completely discharged. Leave the power connected and the battery should begin charging after a few minutes.
Page 120: Monitoring Battery Power
Mobile Computing Monitoring battery power It is seldom necessary to charge the RTC battery because it NOTE charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.
Page 121: Determining Remaining Battery Power
Click the Toshiba Power Saver icon. The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge. Sample Toshiba Power Saver Properties Dialog Box Mobile Computing Monitoring battery power...
Page 122: What To Do When The Battery Runs Low
Mobile Computing Monitoring battery power The remaining battery charge is indicated on the top-left side of the dialog box. With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged.
Page 123: Setting Battery Alarms
To change the default alarm settings: Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select the Alarm settings in the Setup Alarm section. Before your computer runs out of battery power, save your data and take one of the following actions: ❖...
Page 124: Power Profiles In Windows Xp
By using them, you can greatly increase the length of time you can use the computer before you need to recharge the battery. Toshiba has combined these options into preset power usage modes or profiles. Power profiles in Windows XP...
Page 125: Changing The Main Battery
Press pop-up window. Sample Power Profile mode pop-up window While continuing to press desired power profile. The power profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Release the The pop-up window disappears. You are now in the selected mode.
Page 126: Removing The Battery From The Computer
Mobile Computing Changing the main battery If your battery discharges fully, your information will be lost. Be sure to save your work often. Removing the battery from the computer Save your work. Turn off the computer. Remove all cables connected to the computer. Turn the computer over.
Page 127 Sample sliding the battery release latch While holding the battery release latch, lift the discharged battery out of the computer. Sample removing the discharged battery pack If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in “Disposing of used batteries”...
Page 128: Inserting The Battery Into The Computer
Mobile Computing Changing the main battery Inserting the battery into the computer Assuming you just removed the battery pack (see the battery from the computer” on page Place the battery module into the battery compartment. Sample inserting a new battery pack If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again.
Page 129: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through to Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 130: Maximizing Battery Life
Mobile Computing Taking care of your battery ❖ Do not expose the battery pack to fire. The battery pack could explode. Maximizing battery life To maximize the life of your battery pack: ❖ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 131: Disposing Of Used Batteries
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under federal, state, and local laws, it may be illegal to dispose of old batteries by placing them in the trash.
Page 132: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 133: Chapter 4: Exploring Your Options
Chapter 4 Exploring Your Options In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in ® the Windows system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 134: Finding Your Way Around The Desktop
Exploring Your Options Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button Sample Windows desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 135 The icons initially displayed on your system desktop include: Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin.
Page 136: System Tray
Exploring Your Options Exploring the desktop Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 137: Setting Up For Communications
To stay current on the most recent software and hardware NOTE options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com. Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports.
Page 138 Exploring Your Options Setting up for communications The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings. If you are having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it.
Page 139: Connecting The Modem To A Telephone Line
Close the Control Panel. Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 140: Connecting Your Computer To A Network
Exploring Your Options Setting up for communications The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet.
Page 141 To avoid this delay, you can reconfigure Windows to disable the LAN port. TECHNICAL NOTE: You can also use ConfigFree to reconfigure Windows to disable the LAN port. For procedures, “Using ConfigFree™ with your Toshiba Computer” on page 283. To disable the LAN port: Click Start, click Control Panel, then Performance and Maintenance.
Page 142: Using Wireless Lan Connectivity
Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. For systems equipped with Wi-Fi, flip the wireless on/off switch to the On position.
Page 143 Using the optional Bluetooth Bluetooth is a technology that expands wireless ™ communication beyond networking equipment, and can connect many different kinds of electronic devices without the need for cables. You can use Bluetooth and Wi-Fi NOTE To enable a wireless device, use the “Enabling a wireless device”...
Page 144: An Overview Of Using The Internet
Exploring Your Options An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features. ❖ The Internet ❖ The World Wide Web ❖ “Internet Service Providers”...
Page 145: Internet Service Providers
Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection. You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and...
Page 146: Surfing The Internet
Exploring Your Options An overview of using the Internet Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type the Web address.
Page 147: Uploading And Downloading Files From The Internet
❖ Online shopping Many Web sites offer products and services for sale. Uploading and downloading files from the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 148: Using A Microphone
Exploring Your Options Exploring audio features DEFINITION: A .wav (pronounced “wave”) file is a Windows format for storing sound. TECHNICAL NOTE: If you record MP3 files, you will only be able to play them on a device capable of playing MP3 files. Using a microphone To record high-quality sounds, you can use the internal microphone or attach an external microphone:...
Page 149: Adjusting Recording Quality
Positioning Sample Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform. Sound Recorder can only record 60 seconds at a time. NOTE To hear what you just recorded, click the Play button.
Page 150: Using External Speakers Or Headphones
Exploring Your Options Using the i.LINK In the Audio Properties dialog box, adjust the Recording Volume, Preferred device, and Preferred quality. Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Page 151: Inserting And Removing Pc Cards
Inserting and removing PC Cards Your Qosmio G15 Series computer comes with one PC Card slot and supports two types of PC Cards: ❖ Type I cards—You can install one of these cards. ❖ Type II cards—You can install one of these cards. Inserting a PC Card Use caution when lifting or turning your computer.
Page 152: Removing A Pc Card
Exploring Your Options Inserting and removing PC Cards Insert the PC Card. Sample inserting a PC Card When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray.
Page 153: Setting Up A Pc Card For Your Computer
Grasp the edges of the PC Card and slide it out of the slot. Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer.
Page 154: Removing Memory Stick Or Memory Stick Pro Media
Exploring Your Options Using the Bridge Media slot Sample inserting Memory Stick or Memory Stick PRO media Do not remove Memory Stick media while data is being written or read. Even when the message “copying...” in the windows disappears, writing to the media might still be in progress and your data could be destroyed.
Page 155: Removing An Sd™ Card
Sample inserting an SD Card Do not touch the SD expose the storage area to static electricity, which can destroy data. Do not remove an SD Even when the message “copying...” in the windows disappears, writing to the card might still be in progress and your data could be destroyed.
Page 156: Removing An Xd-Picture Card
Exploring Your Options Using the Bridge Media slot Sample inserting an xD-Picture Card Do not touch the xD-Picture could expose the storage area to static electricity, which can destroy data. Do not remove an xD-Picture or read. Even when the message “copying...” in the windows disappears, writing to the card might still be in progress and your data could be destroyed.
Page 157: Using Qosmioplayer
Using QosmioPlayer Your computer includes the QosmioPlayer software, allowing you to watch television (if the computer is connected to a television or video source), play audio CDs, or watch DVD- video without having to launch the operating system. When using QosmioPlayer, some MCE Remote Control NOTE options will not function.
Page 158: Using The Media Control Buttons
Exploring Your Options Using QosmioPlayer Using the Media Control Buttons The Media Control buttons above the computer keyboard allow you to reverse to the previous song, skip to the next song, play or pause the CD, or stop the CD. Play/ Pause Sample CD Player Media Control buttons...
Page 159: Playing A Dvd
Press this key to hide the audio CD option guide. Press again to re-display the guide. CTRL + S Press the CTRL+S keys to shuffle the CD currently playing. CTRL+UP/ Press the CTRL+UP Arrow keys to increase the volume, press DOWN Arrow the CTRL+DOWN Arrow keys to decrease the volume.
Page 160 Exploring Your Options Using QosmioPlayer When playing a DVD, you have the following options: Press this key once to display the basic DVD guide options. Press the key twice to display the full DVD guide options. Press the key again to hide the DVD guide options. Press a number on your keyboard to play a specific DVD chapter.
Page 161: Watching Television
TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you can not view the DVD because of a region error, be sure to change the region code in the Windows The drive will allow you to change regions four times. On the fourth change, the region will be “locked in.”...
Page 162: Connecting An External Device
Exploring Your Options Using QosmioPlayer When viewing television, programs, you have the following options: Press a number on your keyboard to watch a specific channel. PAGE UP/ Press the PAGE UP key to scroll backward through channels, DOWN press the PAGE DOWN key to scroll forward through channels. CTRL+UP/ Press the CTRL+UP Arrow keys to increase the volume, press DOWN Arrow...
Page 163: Remote Control For Qosmioplayer
Sample pressing the Monitor button Press the Monitor button to close and exit the external device environment and return to Windows or the QosmioPlayer. Remote Control for QosmioPlayer You can use your QosmioPlayer remote control to play CDs and DVDs, and to watch television programs through QosmioPlayer.
Page 164 Exploring Your Options Using QosmioPlayer QosmioPlayer Remote Control Buttons Overview Stop Record (Functional only with MCE) Rewind Replay Back Arrows Volume Control Recorded TV (Functional only with MCE) Guide (Functional only with MCE) Sample QosmioPlayer Remote Control STOP REPLAY BACK START MUTE RECORDED...
Page 165 Exploring Your Options Using QosmioPlayer The remote control has the following buttons/functions: Power — Turns the computer on and starts Windows if the computer is off or in Hibernation mode. If the computer is running Windows or QosmioPlayer, pressing Power turns off the computer.
Page 166 Exploring Your Options Using QosmioPlayer Mute — Disables your computer’s sound. Press again to enable sound. DVD Menu — Turns on QosmioPlayer’s CD/DVD function. Live TV — When the computer is off, turns on QosmioPlayer and displays a live TV program. Remote Control Button Groups Use your remote control to navigate all the QosmioPlayer windows.
Page 167 Media Playback Buttons These buttons allow you to play back, music files, playlists, music CDs, and DVD movies from within QosmioPlayer. Use Pause to turn off QosmioPlayer. Press Play to play selected media. Use Forward to move selected media forward. Press Forward up to three times to increase the fast forwarding speed.
Page 168: Installing The Qosmioplayer Recovery Media
Exploring Your Options Installing the QosmioPlayer Recovery media ❖ To play a DVD/CD, press the DVD Menu button to start QosmioPlayer in DVD mode. Once QosmioPlayer starts, you can use the Live TV and DVD NOTE Menu buttons to switch between TV and DVD modes. Installing the QosmioPlayer Recovery media To recover or repair QosmioPlayer on a computer that has the application installed:...
Page 169: Edition 2005
Chapter 5 Getting to Know the Windows Center Edition 2005 This section introduces you to the Windows Center Edition 2005, a complete multimedia center where you can play your entire library of audio, video, and picture media on your computer, using either your computer’s keyboard, mouse, or the remote control.
Page 170: Media Center Setup
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup Media Center Setup This section shows you how to set up your computer to use the Media Center. There are many different methods you can use to connect your television and computer which are covered in the following sections.
Page 171 Getting to Know the Windows ® XP Media Center Edition 2005 Some stations may not come in clearly if the signal is not NOTE strong enough. If you do not have a Set-top box, you may need to purchase a signal amplifier which may help boost and improve the cable signal.
Page 172: Connecting The Tv Signal Source When You Have An Existing Setup
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup Connecting the TV Signal Source When You Have an Existing Setup This section describes how to connect the signal source from the wall to a VCR/DVD player to a TV using two coaxial cables (not shipped with your computer or system).
Page 173: Connecting The External Remote Sensor
Getting to Know the Windows ® XP Media Center Edition 2005 VCR/DVD player or Set-top box to the S-video in port on the back of the computer. Existing setup Wall Cable Coaxial cable Set-top box/ satellite In Set-top box/ satellite Out Coaxial cable VCR/DVD...
Page 174: Starting The Media Center
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center Connect the IR remote sensor cable (small 3.5 mm) connector to one of the ports on the IR receiver. Sample IR receiver with cables attached Position the end of the IR receiver cable over the remote IR receiver window on your cable TV Set-top box or VCR/DVD player.
Page 175 Getting to Know the Windows ® XP Media Center Edition 2005 The first time you open Media Center, the program displays a NOTE setup wizard. You will use the wizard to test your remote control and configure your Internet connection, TV signal, Television Program Guide, and speakers.
Page 176 Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center Sample Media Center Setup Wizard: Welcome screen Click Next. The wizard displays the Media Center Setup screen. Click Next. The wizard displays the Media Center Privacy Policy screen.
Page 177 Getting to Know the Windows ® XP Media Center Edition 2005 ❖ If the connection is not working, the wizard displays an error message. Recheck both ends of your connection and click Test. ❖ If the connection is working, the screen displays a message to that effect and highlights the Next button.
Page 178 Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center When you set up the TV Signal and identify the Set-top box NOTE remote, you may receive a “Remote Not Recognized” message. When this occurs, you must select the Have Media Cen- ter Learn My Remote Again From Scratch option.
Page 179 Getting to Know the Windows ® XP Media Center Edition 2005 The wizard displays the Enter Your ZIP code screen. Use the numeric keys on your keyboard to enter your ZIP code, then click Next. The wizard displays the Download Provider Information screen.
Page 180 Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center Click Finish this wizard, then click Next. The wizard displays the You Are Done! screen. Click Next. The wizard displays the Optional Setup screen. Select Set up your speakers, and then click Next. The wizard displays the Welcome to Speaker Setup screen.
Page 181: Using Media Center
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center You can run Media Center side by side with other Windows NOTE software programs. It is possible to browse through your pictures, watch videos, play music, and even record TV while using other Windows programs.
Page 182 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center ❖ Change your Media Center Settings When enjoying the Media Center, use the icons on the Title Bar to return to the Media Center main screen, go back to the previous screen, or to display the Media Center’s online help.
Page 183: Navigating Media Center
Getting to Know the Windows ® XP Media Center Edition 2005 Navigating Media Center In the Media Center windows, a selected item, such as a folder, file, or menu item is outlined with a green border. To select items, use the arrow buttons on the remote control, and then the OK button to enter your selection.
Page 184: Remote Control Buttons Overview
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Remote Control Buttons Overview Stop Record Rewind Replay Back Arrows Volume Control Recorded Guide The Remote Control The remote control has the following buttons/functions: Power — Turns the computer on and starts Windows if the computer is off or in Hibernation mode.
Page 185 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Stop — Stops the media currently playing. Record — Records the selected television program and stores it on your hard disk. Rewind — Moves the media (video, DVD, music, and so on) backwards.
Page 186 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Channel/Page Control — Changes the TV channel or moves a page up and down, depending on the available options. Mute — Disables your computer’s sound. Press again to enable sound.
Page 187 Getting to Know the Windows ® XP Media Center Edition 2005 When the computer is powered on, use this button to launch Media Center. ❖ Guide launches Media Center into the TV program guide mode when the computer is powered off or in Hibernation mode.
Page 188 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center ❖ Moves a TV program (that has been paused or stopped) forward to the current moment in live TV, and then begins playing. To stop forward progress of the media, press Play. Use Record to record TV programs.
Page 189: Watching Television Programs
Getting to Know the Windows ® XP Media Center Edition 2005 ❖ For DVDs, Previous moves to the previous chapter. ❖ For videos and live TV and videos, Previous moves back seven seconds. Using the Media Center Remote Control To begin using your remote control: Point the remote control at the remote sensor.
Page 190 Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs Sample Media Center main window, My TV In My TV you can: ❖ Search for TV shows to watch or record using the Television Program Guide. ❖...
Page 191: Selecting A Program From The Tv Guide
Getting to Know the Windows ® XP Media Center Edition 2005 ❖ Search for TV shows by title, keyword, or category. If your computer enters Standby mode while you are viewing NOTE television, and you resume the computer, the live TV screen will be blank.
Page 192: Watching A Recorded Tv Program
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs Press OK on the remote to select the program that you want to view. Media Center displays a detailed description of the program at the bottom of the screen. ❖...
Page 193: Changing A Scheduled Recording
Getting to Know the Windows ® XP Media Center Edition 2005 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. Select My TV. Select Recorded TV. All of your recorded TV programs display on the Recorded TV screen.
Page 194: Searching For A Tv Program To Watch
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs Press OK. You can resolve recording conflicts on the Scheduled screen. NOTE To return to the previous menu, press Back on the remote, or NOTE click the back arrow at the top of the screen. Searching for a TV Program to Watch You can search the TV Guide to find a TV program that you want to watch by entering a title, keyword, or by selecting a...
Page 195: Recording Tv
Getting to Know the Windows ® XP Media Center Edition 2005 Use the arrow buttons to scroll through the search results, select a show, and then press OK. If the show appears multiple times, select a time and press OK. If the show is not currently playing, select Record Show or Record Series, and then press OK.
Page 196: Recording Tv Tips
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV mouse over the icon, the Media Center displays which show is currently being recorded. You can right-click the icon to open Media Center and stop recording. Media Center automatically records until the show is scheduled to be over as listed in the TV Guide.
Page 197: Recording From The Guide
Getting to Know the Windows ® XP Media Center Edition 2005 only one network’s programming. This may cause recording options to be unavailable. You may need to manually update the Guide before scheduling a recording. If you turn off your computer, the Media Center will not record NOTE a scheduled program.
Page 198: Recording From Search
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV Recording from Search To record a current or future show or series using Search: Press the Start button on the remote control to start the Media Center and to open the Media Center main window.
Page 199: Changing Your Settings
Getting to Know the Windows ® XP Media Center Edition 2005 Press the Start button on the remote control to start the Media Center and to open the Media Center main window. Select My TV. Select Recorded TV. Select Add Recording. Select the channel using the Channel/Page button on the remote.
Page 200: Changing Recording Priorities
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV ❖ Recording a TV program, including manually recording ❖ The TV Guide ❖ The TV Signal ❖ Adjust display settings ❖ Audio settings To make a change, click on the desired setting. Changing recording priorities If Media Center encounters a recording conflict between two series, then Media Center uses the series priorities list to...
Page 201: Watching And Recording Movies
Getting to Know the Windows ® XP Media Center Edition 2005 Watching and Recording Movies To watch or record a movie: Press the Start button on the remote control to start the Media Center and to open the Media Center main window Select the movie that you want to watch or record.
Page 202: Creating Your Music Library Using Windows Media ® Player
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Creating Your Music Library Using Windows Media Each time you add music files outside of Windows Media Player, you must use the Tools menu to add music files to your Windows Media Player Library.
Page 203: Adding Music From Your Hard Drive To Windows Media Player Library
Getting to Know the Windows ® XP Media Center Edition 2005 Deleting Music Files To delete a file from the Windows Media Player Library, select the music file, right-click the mouse, and then select Delete. Adding Music from Your Hard Drive to Windows Media Player Library You can place all your music files into the My Music folder or into other folders on your hard drive, however, you need to...
Page 204: Playing Digital Music Files
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Select an option from the Search on drop-down menu. Select Search to search all drives or select Browse to search through a specific drive. Click Search. Windows Media Player searches the selected drives for all supported audio files and adds them to the Media Library.
Page 205: Finding Music Files In My Music
Getting to Know the Windows ® XP Media Center Edition 2005 audio player, Windows opens this program and begins playing the CD. Press the Start button on the remote control. Insert a CD into the CD drive — the CD plays automatically in Media Center.
Page 206: Playing A Song
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Use the arrow keys to select a music file, press OK on the remote, and then press Play on the remote control to begin playing that music file. If you back up music files from a CD using Windows Media NOTE Player, you must log the files into the Media Player’s play list...
Page 207: Setting Up An Automatic Disc Jockey
Getting to Know the Windows ® XP Media Center Edition 2005 Setting Up an Automatic Disc Jockey You can select to have Media Center randomly play all the available songs in one genre: Press the Start button on the remote control to start the Media Center and to open the Media Center main window Select My Music.
Page 208: Creating A Playlist
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music ❖ Repeat (play the album again) ❖ Play (play the selected album). When you select this option, the Now Playing window opens, and the album starts playing. ❖...
Page 209: Displaying Your Pictures
Getting to Know the Windows ® XP Media Center Edition 2005 Select New List, then Playlist. Drag the music files to the right side of the Media Player window. You can also select the music file and click the Add selection to the current list icon. Left click the Now Playing list menu and select Save Playlist As.
Page 210 Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures ❖ Change transition time and display order of the pictures in your slide show. ❖ Sort pictures by name or date. ❖ View and scroll through pictures that are in the My Pictures folder by using your remote control or your keyboard and mouse.
Page 211: Viewing A Slide Show
Getting to Know the Windows ® XP Media Center Edition 2005 Press OK to select a picture or folder to view. The selected picture opens in full screen mode. Viewing a Slide Show To view pictures as a slide show Press the Start button on the remote control to start the Media Center and to open the Media Center main window.
Page 212: Watching Your Digital Movies
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies Watching Your Digital Movies The My Videos window in the Media Center makes it easy to play home video files you created or video files you downloaded from the Internet.
Page 213: Playing Digital Videos
Getting to Know the Windows ® XP Media Center Edition 2005 If not, move your videos into the My Videos or Shared Videos folder in Windows Explorer for Media Center to be able to find and play them. Once you have placed all your videos into the My Videos or Shared Videos folder, you can rename, add, delete, and organize them into folders.
Page 214: Playing A Video In Full Screen Mode
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies mouse to resize the window if you want to watch your video while doing something else on your desktop. When the video is finished, select Restart and then press OK to replay the video.
Page 215: Watching A Dvd
Getting to Know the Windows ® XP Media Center Edition 2005 Watching a DVD Watching DVDs in the Media Center allows you to control the playback with your remote control. If you select to play your DVD in another program, the use of some of the remote control buttons is not supported.
Page 216: Stopping A Dvd Movie
Getting to Know the Windows ® XP Media Center Edition 2005 Watching a DVD To change the window size, move the mouse and click the Resize button on the taskbar of the DVD window. Stopping a DVD Movie Press the Stop button on the remote control to stop the movie.
Page 217: Changing The Media Center Settings
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings In the Media Center Settings window, you can change settings for watching television, for viewing your pictures and slide shows, and for controlling sound and the display of all the Media Center windows.
Page 218 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Select General. The General Settings screen includes the following options: ❖ Select Startup and Window Behavior to change Media Centers startup and window behavior, for example, you can elect to start Media Center when Windows starts.
Page 219 Getting to Know the Windows ® XP Media Center Edition 2005 Changing TV Recorder Settings The TV Recorder settings allow you to control your recording priorities and options in Media Center. Press the Start button on the remote control to start the Media Center and to open the Media Center main window Select Settings.
Page 220 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings of space to run your Windows XP operating system, run software programs, and store data files. If your hard disk becomes full, it may affect your computer’s speed and performance.
Page 221 Getting to Know the Windows ® XP Media Center Edition 2005 Press the Start button on the remote control to start the Media Center and to open the Media Center main window Select Settings. Select TV. Select Guide. ❖ Select Edit Channels to add or remove a channel from the Guide.
Page 222 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Changing Parental Controls for TV Viewing Only the administrator of the computer can change the Parental Control setting. This feature may not be available on your computer.
Page 223 Getting to Know the Windows ® XP Media Center Edition 2005 Use the arrow buttons to select Block unrated movies, and then press OK. Use the arrow buttons to select the + or - area. Press the OK button on the remote control to scroll through the movie rating levels.
Page 224 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Selecting Close Captioning The audio settings window allows you to select closed captioning. Close captioning displays the TV’s spoken audio in text format for those who are unable to hear the audio. To select close captioning: Press the Start button on the remote control to start the Media Center and to open the Media Center main...
Page 225: Changing Picture Settings
Getting to Know the Windows ® XP Media Center Edition 2005 Changing Picture Settings Each user can set his or her own picture settings. Press the Start button on the remote control to start the Media Center and to open the Media Center main window Select Settings.
Page 226: More Programs
Getting to Know the Windows ® XP Media Center Edition 2005 More Programs More Programs Sample Media Center main screen Use the options on the More Programs screen, available from the Media Center’s main menu, to perform the following tasks: ❖...
Page 227: Online Spotlight
Getting to Know the Windows ® XP Media Center Edition 2005 Online Spotlight Sample More Programs main screen Online Spotlight Use the Online Spotlight screen, available from Media Center’s main screen, to purchase and download music, DVDs, and movies, and read news and sports stories. Tips on Media Center are also available for viewing from this screen.
Page 228: Getting Help For Media Center
Getting to Know the Windows ® XP Media Center Edition 2005 Getting Help for Media Center Getting Help for Media Center Click the Help icon at the top left of the screen to access Media Center’s Help screen, which includes a number of links to helpful information on Media Center, as well as help for hardware problems.
Page 229: Chapter 6: Toshiba Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ Fn-esse® ❖...
Page 230: Fn-Esse
You can assign any key that is not associated with a hot key or a keyboard overlay. ® Starting Fn-esse Click Start, point to All Programs, Toshiba, then Utilities, then click Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse window ®...
Page 231 Fn-esse displays the Add/Edit Command dialog box with the Description, Command Line, and Working Directory fields automatically completed. Click OK to close the Add/Edit Command dialog box with your key assignment in place. Toshiba Utilities ® Fn-esse ® Explorer (or the program...
Page 232: Using The Keyboard Or Pointing Device To Assign Keys
Toshiba Utilities Fn-esse The program or document is now associated with the key you just selected. To open the program or document, press the appropriate key from within any Windows program. Using the keyboard or pointing device to assign keys...
Page 233: Viewing Existing Key Assignments
Changing or removing existing key assignments In the Fn-esse keyboard, click the key you wish to change with the secondary button. Fn-esse displays the Assignment Type dialog box. plus the appropriate key from within any ® program. Toshiba Utilities ® Fn-esse ®...
Page 234: Toshiba Console
❖ To remove the key assignment, click Clear. TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, then click All Programs.
Page 235: Customizing Your Computer
Toshiba Hardware Settings ❖ Toshiba Button Controls ❖ ConfigFree ❖ CD/DVD Drive Acoustic Silencer ❖ Toshiba Picture Enhancement Utility Network The Network category features the following utilities: Connectivity Doctor Bluetooth Start Bluetooth Settings Bluetooth Local COM Settings For more information, see Toshiba Computer”...
Page 236: Power Saver
You can either use one of the preset modes or create and use your own customized profile. The preset profiles cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change...
Page 237 Highlight the profile you want to modify. Change the settings you want on the Basic Setup tab. You may also change settings on the Setup Action tab. Keep in mind however, that by default, these actions will apply to all profiles. Toshiba Utilities TOSHIBA Console...
Page 238: Mouse Utility
Standby ] and Hibernation [ Fn+F3 To activate: Click Start, All Programs, Toshiba, Utilities, then click the Hotkey utility. The Toshiba Hotkey window appears. Sample Toshiba Hotkey utility window Select the desired option.
Page 239: Toshiba Hardware Settings
Toshiba Hardware Setup is the Toshiba configuration management tool available through Windows. To access it, open the Start menu, click Control Panel, then Printers and Other Hardware. Then click the Toshiba HWSetup icon. Sample TOSHIBA HWSetup window The tabs represent various dialog boxes. They are: ❖...
Page 240: Toshiba Picture Enhancement Utility
Any options that you change will become default settings when you restart your system. Toshiba Picture Enhancement Utility The Toshiba Picture Enhancement utility allows you to adjust your computer screen to maximize the ambient surrounding light. To access the Toshiba Picture Enhancement Utility, click Start, point to All Programs, Toshiba, then Utilities, then click Picture Enhancement.
Page 241: Cd/Dvd Drive Acoustic Silencer
CD/DVD Drive Acoustic Silencer Sample CD/DVD Drive Acoustic Silencer screen This utility, available on the Toshiba Console, can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more...
Page 242: Setting Passwords
Setting a password leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and...
Page 243: Using An Instant Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password To register a password for the power-on password functions: Click the TOSHIBA Console icon on the desktop. Toshiba Utilities Setting passwords , then press . An instant...
Page 244 Toshiba Utilities Setting passwords On the left side, select Security. Sample TOSHIBA Console Security window Select the Supervisor Password icon. Click Set. Type your password in the Input box. Retype your password in the Input again box. Click Set. Click OK.
Page 245 Deleting a supervisor password To cancel the power-on password function: Click the TOSHIBA Console icon on the desktop. On the left side, select Security. Select the Supervisor Password icon. Select Verify by Password. Select the Supervisor Password tab. Type the correct password.
Page 246 Toshiba Utilities Setting passwords Disabling a user password To cancel the power-on password function: Click the TOSHIBA Console icon on the desktop. On the left side, select Security. Select the User Password icon. Select Verify by Password. Type the correct password.
Page 247: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 248 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 249: Problems When You Turn On The Computer
Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start. Make sure you attached the AC adapter and power cord/cable properly or installed a charged battery.
Page 250: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows The computer displays the message. The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 251: Using Startup Options To Fix Problems
The Windows Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 252: Internet Problems
If Something Goes Wrong The Windows See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 253: Resolving A Hardware Conflict
The Help and Support window appears. Then do one or both of the following: ❖ In the search field, type the topic of the problem with which you need help and follow the on-screen instructions. ❖ Click a problem about which you would like help from the listings and follow the on-screen instructions.
Page 254: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work.
Page 255: Fixing A Problem With Device Manager
❖ Disable another system component and use its resources for the new device, see Manager” on page ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
Page 256 If Something Goes Wrong Resolving a hardware conflict Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device.
Page 257: Memory Problems
Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, then click Turn off computer. Click Turn Off. The operating system shuts down and turns off the computer automatically.
Page 258 If Something Goes Wrong Resolving a hardware conflict Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adapter and power cord/cable. Make sure the AC adapter and power cord/cable are firmly plugged into both the wall outlet and the computer.
Page 259: Keyboard Problems
Check the power options using the Power Saver utility. Have you added a device, such as a PC Card or memory module, that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts.
Page 260 If Something Goes Wrong Resolving a hardware conflict You may have activated the instant password feature by pressing password, press the . If no password is registered, press Enter reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor.
Page 261 Click Properties, and then the Settings tab. Change the Colors option and click OK. For more information, see Windows A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware.
Page 262: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Over a period of time, and depending on the usage of the NOTE computer, the brightness of the LCD Screen will deteriorate. This is an intrinsic characteristic of LCD technology. Maximum brightness is only available when operating in AC power mode.
Page 263 You can choose one or both options: ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors Click Start. Error-checking runs the test. Your hard disk seems very slow. If you have been using your computer for some time, your files may have become fragmented.
Page 264: Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict The computer displays the message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette.
Page 265: Sound System Problems
manual eject button. This button is in the small hole next to the disc eject button on the right side of the computer. Some discs run correctly, but others do not. If the problem is with an application CD-ROM, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 266 If Something Goes Wrong Resolving a hardware conflict Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS). Sometimes the CIS contains enough information for you to use the card immediately.
Page 267 Resolving PC Card problems Here are some common problems and their solutions: The slots appear to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start. Click My Computer icon with the secondary button, then click Properties.
Page 268: Printer Problems
If Something Goes Wrong Resolving a hardware conflict Click Safely remove xxxx, where xxxx is the identifier for your PC Card. The operating system displays a message that you may safely remove the card. Remove the card from the slot. The system does not recognize your PC Card.
Page 269: Modem Problems
You may have connected the printer while the computer is on. Disable Stand By mode, turn off the computer, and turn off the printer. Turn the printer back on, make sure it is on line, then turn the computer back on. Try printing another file.
Page 270: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits The modem is on, set up properly and still will not transmit or receive data. Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line.
Page 271: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before contacting Toshiba: ❖ Review the troubleshooting information in your operating system documentation.
Page 272: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 273: Other Toshiba Internet Web Sites
Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia France Toshiba Systèmes (France) S.A.
Page 274 Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec.
Page 275: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 276: Instant Password Security
The power usage profiles are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Sample power usage modes The properties of each mode are set in the Toshiba Power Saver utility. For more information, see Computing” on page 115.
Page 277: Stand By Mode
Stand By mode This hot key places the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Standby Mode”...
Page 278: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default), a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display.
Page 279: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. ❖...
Page 280: Enabling A Wireless Device
Hot Keys Enabling a wireless device Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer (for systems with Wi-Fi or Bluetooth The wireless modes are: Bluetooth Bluetooth Wi-Fi enabled—This enables only the Wi-Fi module. All devices enabled—This enables both the Bluetooth All devices disabled—This disables both the...
Page 281: Disabling Or Enabling The Touchpad
Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. For information on how to use the TouchPad, see “Disabling or enabling the TouchPad” on page Sample disable and enable TouchPad windows Keyboard hot keys This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off.
Page 282: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 283: Appendix C: Using Configfree™ With Your Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 284: Getting Started
Networking, ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the Toshiba Console button (if applicable to your system) to open the Toshiba Console, and then click the ConfigFree icon. ❖ Click the ConfigFree icon click the desired utility. If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.”...
Page 285: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer Sample ConfigFree Launcher ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 286 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address. A wireless network device also shows information such as the network SSID and the device’s Wired Equivalent Privacy (WEP) key...
Page 287 Using ConfigFree™ with your Toshiba Computer If a problem, or potential problem, is detected, a triangle containing an exclamation point appears in the Connectivity Doctor screen and an orange frame describes the relevant location. You can then view a possible cause and solution for the problem by clicking the exclamation point.
Page 288: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN devices and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map.
Page 289 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices The following screen shows an example of Bluetooth devices that are detected. As with the Wi-Fi screen, moving the mouse pointer over a device icon displays information about the device.
Page 290: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click your own computer at the center of the map. Configured devices are automatically connected. Devices not yet configured launch the Add New Connection Wizard, where you can configure and connect to the device.
Page 291 Using ConfigFree™ with your Toshiba Computer ❖ Personal firewall settings for Internet connections. ❖ Dial-up connection settings for the default connection. ❖ File and printer sharing settings. ❖ Printer settings for the default printer. To create a profile: Click the icon in the system tray.
Page 292: Quick Connect
Quick Connect The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector. Once the projector utility is installed, launching the Quick Connect utility automatically opens the Wireless Data Projector Application.
Page 293 (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 294 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 295: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 296: Semi-Automatic Switch Feature
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears.
Page 297: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor...
Page 298 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE MIDI PCMCIA direct current direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 299 SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 300 Glossary application—A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 301 byte—A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache.
Page 302 Glossary controller—A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU—See central processing unit (CPU). CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 303 disk—A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive—The device that reads and writes information and programs on a diskette or hard disk.
Page 304 Glossary DVD-ROM (digital versatile [or video] disc read-only memory)—A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation—A technique in which a device or program imitates another device or program.
Page 305 Compare software. Hibernation—A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 306 Glossary hot swapping—The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change. icon—A small image displayed on the screen that represents a function, file, or program. interlaced—A method of refreshing a computer screen, in which only every other line of pixels is refreshed.
Page 307 local area network—See LAN. logical drive—A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives.
Page 308 Glossary non-interlaced—A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk—A disk for storing programs and data that cannot be used to start the computer.
Page 309 port—A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor—See central processing unit (CPU). program—A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility.
Page 310 Glossary ROM (read-only memory)—Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up.
Page 311 universal serial bus (USB)—A serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all-purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial.
Page 312: Index
Index Numerics 101-key keyboard 86 AC adapter 52 AC power cable connectors 282 accessories carrying cases 82 Add Printer Wizard 70 adjusting recording quality 149 Alt keys 87 antenna connecting 79 arm/wrist strain 45 assign keys Fn-esse 232 audio .wav files 147 features 147 Auto-Run 104 avoiding injury 43...
Page 313 playing an audio 102 playing using Auto-Run 104 CD and DVDs viewing contents 105 CD/DVD creating 104 inserting 101 problem solving 265 channels DMA 254 IRQ 254 character keys 86 charging the battery 55 checking device properties 256 click 60 communications network connection 140 system resources 254...
Page 314 Index does not look normal/flickers external monitor not working latch 56 screen is blank 259 display device connecting 74 display mode setting 76 display modes hot key 279 display output settings 77 display panel closing 82 opening 56 disposal information 27 disposing of used batteries 131 DMA (Direct Memory Access) 254 double-click 60...
Page 315 hardware conflicts 253 resolving 254 headphones using 150 Help Windows XP Media Center Edition 252 Hibernation mode 109 configuring 110 starting again from 111 Hibernation mode hot key 278 hot key display modes 279 functions 275 Hibernation mode 278 keyboard 281 keyboard overlays 281 power usage mode 276 Stand By mode 277...
Page 316 Index keyboard, external 68 keyboard, full-size 86 keyboard, PS/2-compatible LCD power-saver 82 lighting 45 main battery changing 125 removing 126 memory expansion slots 62 problem solving 257 removing expansion slot cover memory module inserting 64 removing 67 Memory Stick inserting 153 removing 154 microphone 148 built-in 148...
Page 317 256 compact discs not running computer hangs when PC Card computer will not power up 249 contacting Toshiba 271 corrupted/damaged data files Device Manager 255 disabling a device 255 disk drive is slow 263...
Page 318 Index PC Card 265 checklist 266 error occurs 268 hot swapping fails 267 not recognized 268 slots appear dead 267 power and batteries 257 printer 268 program not responding 247 program not working properly screen does not look right/ flickers 260 system resources 254 trouble prevention 270 URL address not found 252...
Page 319 74 Toshiba Index Internet Web sites 273 Toshiba Console 234 Toshiba Hardware Setup 239 Toshiba online resources 114 Toshiba utilities 229 traveling tips 132 turning off the computer 80 turning on the power 57 TV antenna port 79...
Page 320 Index desktop 133 Windows XP Media Center Edition taskbar 136 wireless interoperability 7 wireless mode hot key 280 wireless networking 140 Wizards Dial-Up Networking Wizard work habits 46 xD-Picture Card 153 inserting 155 removing 156...

This manual is also suitable for:

G15-av501-r G15 av501 - qosmio - pentium m 1.8 ghz Qosmio g15 Pqg10u-00y00l Qosmio g15 series

Toshiba G15-AV501 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Options

Chapter 5 : Getting to Know the Windowsxp Media Center

Chapter 6: Toshiba Utilities

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Need help?

Questions and answers

Related Manuals for Toshiba G15-AV501

Summary of Contents for Toshiba G15-AV501