Page of 466
Download Table of ContentsContents Print This PagePrint Bookmark
   
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466
Toshiba Personal Computer
Qosmio F60 Series Maintenance Manual
First edition December 2009
TOSHIBA CORPORATION
File Number 960-796
[CONFIDENTIAL]

   Also See for Toshiba Qosmio F60 Series

   Related Manuals for Toshiba Qosmio F60 Series

   Summary of Contents for Toshiba Qosmio F60 Series

  • Page 1

    Toshiba Personal Computer Qosmio F60 Series Maintenance Manual First edition December 2009 TOSHIBA CORPORATION File Number 960-796 [CONFIDENTIAL]...

  • Page 2

    The information presented in this manual has been reviewed and validated for accuracy. The included set of instructions and descriptions are accurate for the Qosmio F60 Series at the time of this manual's production. However, succeeding computers and manuals are subject to change without notice.

  • Page 3

    NOTE: “Note” contains general information that relates to your safe maintenance service. Improper repair of the computer may result in safety hazards. Toshiba requires service technicians and authorized dealers or service providers to ensure the following safety precautions are adhered to strictly.

  • Page 4

    The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Qosmio F60 Series system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and diagnostic operations for maintenance service.

  • Page 5

    Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the type face below: Format complete System transferred Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 6: Table Of Contents

    3.5-inch Floppy Disk Drive (USB External) ............1-17 2.5-inch Hard Disk Drive..................1-18 Optical Drive (ODD) ....................1-20 Keyboard........................1-24 TFT Color Display....................1-25 Power Supply ......................1-27 Batteries ........................1-29 1.10 AC Adapter ......................1-32 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 7: Table Of Contents

    2.16 Bluetooth Troubleshooting ..................2-64 2.17 Sound Troubleshooting.................... 2-66 2.18 Bridge media Slot Troubleshooting ................. 2-68 2.19 Web camera Troubleshooting .................. 2-69 2.20 TV turner Troubleshooting ..................2-71 2.21 HDMI Troubleshooting ................... 2-73 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 8: Table Of Contents

    Wireless LAN Test Program (Intel-made a/b/g/n Setting up of REF PC)....3-70 3.28 Wireless LAN Test Program on DUT PC (Intel-made)........... 3-75 3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program ..........3-79 3.30 Sound Test program....................3-86 3.31 BIOS SETUP ......................3-87 viii [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 9: Table Of Contents

    3.32 Maintenance (WinPE&FreeDos) Test Program Operation ........3-94 3.33 . Starting TOSHIBA Test & Diagnostic ..............3-95 3.34 . Windows PE T&D ....................3-97 3.35 DOS T&D ......................3-143 3.36 Maintenance (WinPE&FreeDos) Test Program Supplementary Information ..3-171 3.37 Maintenance (WinPE&FreeDos) Test Program Supplementary Information ..3-174...

  • Page 10: Overview

    1 Hardware Overview Chapter 1 Hardware Overview Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 11

    1 Hardware Overview Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 12

    TFT Color Display...................... 25 1.7.1 LCD Module..................25 Power Supply ......................27 Batteries ........................29 1.9.1 Main Battery..................29 1.9.2 Battery Charging Control ..............30 1.9.3 RTC battery ................... 31 1.10 AC Adapter ......................... 32 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 13

    Table 1-8 Battery specifications .................... 29 Table 1-9 Time required for charges ..................30 Table 1-10 Data preservation time..................31 Table 1-11 RTC battery charging/data preservation time ............. 31 Table 1-12 AC adapter specifications..................32 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 14: Features

    1 Hardware Overview Features The Toshiba Qosmio F60 Series Personal Computer uses extensive Large Scale Integration (LSI), and Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage and high reliability. This computer incorporates the following features.

  • Page 15

    Two DDR3-1066 SDRAM slots. Memory modules can be installed to provide a maximum of 8GB. Memory modules are available in 1024MB, 2048MB and 4096MB sizes.  Chipset Toshiba Qosmio F60 Series computer is Equipped with Intel Ibex peak HM55 or PH55 (Gfx model made from nVIDIA).  VGA Controller The PC comes in with one of the following two types: ...

  • Page 16

    This port provides 15-pin, analog VGA port. This port allows you to connect an external monitor to the computer.  Bridge Media slot This slot lets you insert an SD™/SDHC™ memory card, miniSD™/microSD™ Card, Memory Stick® (PRO™/PRO Duo™), xD-Picture Card™ and MultiMediaCard Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 17

    You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph. Enables the transmission of video and use of video chat via the internet using specialized applications.

  • Page 18

     SpursEngine: Japanese model only This manual does not explain.  Felica: Japanese model only This manual does not explain.  B-cas: Japanese model only This manual does not explain. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 19

    1 Hardware Overview Figure 1-1 Front of the computer 1-10 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 20

    1 Hardware Overview The system unit configuration is shown in figure 1-2 Figure 1-2 System unit configurations Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-11...

  • Page 21: System Unit Block Diagram

    1 Hardware Overview System Unit Block Diagram Figure 1-3 is a block diagram of the system unit. Figure 1-3 System unit block diagram 1-12 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 22

    1 Hardware Overview The system unit is composed of the following major components:  Microprocessor ® The Toshiba Qosmio F60 Series computer is equipped with an Intel Processor. The PC comes in with one of the following speeds: Intel® Arrandale Processor...

  • Page 23

    1 Hardware Overview  Chipset Toshiba Qosmio F60 Series computer is Equipped with Intel Ibex peak HM55 or PH55 (Gfx model made from nVIDIA). It is a thing corresponding to the following standards, and is constituted. 1. DDR 2. PCI express 3.

  • Page 24

     Ibex peak QM57 or HM55 Built-in HD Audio  Realtek ALC269  Stereo speakers  Digital volume control (Font operation panel)  Stereo headphone jack  External microphone jack  Built-in microphone Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-15...

  • Page 25

     PSC (Power Supply Controller) One TOSHIBA TMP86FS49AUG chip is used. This controller controls the power sources.  Clock Generator L9LVRS394 is used. This device generates the system clock.  Sensor Acceleration Sensor :LIS3L02A 1-16 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 26: Inch Floppy Disk Drive (usb External)

    Table 1-1 3.5-inch FDD specifications TEAC FD-05PUB-337 (G8AC0000B320) Items 720KB mode 1.44MB mode Data transfer rate FDD part 250K bits/second 500K bits/second Full speed mode (12M bits/second) Disk rotation speed 300rpm Track density 5.3 track/mm (135TPI) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-17...

  • Page 27: Inch Hard Disk Drive

    Speed (RPM) 5,400 Data transfer speed (Mb/s) To/Form Media 116.2 MB/s Max To/Form Host 150 MB/s (Genli) Data buffer size (MB/s) Positioning Time(read and Read: 12ms seek time) Motor startup time (s) 1-18 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 28

    102 max Storage size (formatted) 320GB 400GB 500GB 640GB Speed (RPM) 5,400 Internal transfer speed 363-952 typ (Mb/s) Data buffer size (MB/s) Positioning Time(read and Read: 12ms seek time) Motor startup time (s) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-19...

  • Page 29: Optical Drive (odd)

    The DVD Super Multi drive accommodates either 12 cm (4.72-inch) or 8 cm (3.15-inch) CD- ROM, DVD-ROM, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM, DVD-R DL and DVD+R DL. The specifications are listed in Table 1-4. Figure 1-6 DVD Super Multi drive 1-20 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 30

    DVD+RW,DVD-R DL(Read only),DVD+R,DVD+R DL(Read only) Supported Formats CD: CD-DA, CD-ROM, CD-ROM XA, PHOTO CD, CD-Extra(CD+), CD-text, Video CD DVD: DVD-R, DVD-RW (Ver. 1.1, 1.2), DVD-Video, DVD+R, DVD+RW, DVD-RAM,DVD-ROM DVD-R DL(Read only, DVD+R DL(Read only Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-21...

  • Page 31

    24 speed (max) CD-R write 24 speed (max) CD-RW write 16 speed (max), Ultra-speed media 150MByte/s SATA interface Data Buffer Capacity Access time (ms) CD-ROM 180msec typ. DVD-ROM 190msec typ. BD-ROM SL 300msec typ. 1-22 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 32

    DVD+R DVD+RW DVD-RAM DVD+R DL DVD-R DL CD-DA CD-Text Photo CD (single/multi-session) CD-ROM Mode 1, Mode 2 CD-ROMXA Mode 2 (Form1, Form2) Enhanced CD (CD-EXTRA) CD-G (Audio CD only) Addressing Method 2 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-23...

  • Page 33: Keyboard

    Figure 1-7 is a view of the keyboard. See Appendix E about a layout of the keyboard. Figure 1- 7 Keyboard 1-24 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 34: Tft Color Display

    16M colors with 1,366 x 768, 1,600 x 900 and 1,920 x 1080 resolutions. Figure 1-8 shows a view of the LCD module and Table 1-6 lists the specifications. Figure 1- 8 LCD module Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-25...

  • Page 35

    1,680 (W) x 945 (H) Dot spacing (mm) Display range (mm) Specifications 15.6" FHD (1920x1080) LED Backlight Item LP156WF1 Number of Dots 1,920 (W) x 1,080 (H) Dot spacing (mm) Display range (mm) 1-26 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 36: Power Supply

    6. Provides more accurate detection of a low battery. 7. Calculates the remaining battery capacity. 8. Controls the transmission of the status signal of the main battery. The power supply output rating is specified in Table 1-7. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-27...

  • Page 37

    ○ ○ × × ○ ○ ○ ○ × × PCH, ○ ○ ○ ○ ○ × EC/KBC M5V, ○ ○ ○ ○ ○ × LED, ○ ○ ○ ○ ○ ○ 1-28 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 38: Batteries

    The removable main battery pack is the computer’s main power source when the AC adaptor is not attached. The main battery maintains the state of the computer when the computer enters in sleep mode. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-29...

  • Page 39

    If any of the following occurs, the battery charge process stops. 1. The battery becomes fully charged. 2. The AC adaptor or battery is removed. 3. The battery or output voltage is abnormal. 1-30 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 40

    Table 1-12 lists the charging time and data preservation period of the RTC battery. Table 1-11 RTC battery charging/data preservation time Status Time Charging Time (power on) 24 hours Data preservation period (full charge) 30 days Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 1-31...

  • Page 41: Ac Adapter

    Table 1-12,1-13 lists the AC adapter specifications. Table 1-12 AC adapter specifications Parameter Specification G71C0009S114 (2-pin) G71C0009S115 (3-pin) Power Input voltage 100V/240V Input frequency 50Hz to 60Hz B Output voltage Output current 4.74A 1-32 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 42: Troubleshooting Procedures

    Troubleshooting Procedures Chapter 2 Troubleshooting Procedures Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 43

    Troubleshooting Procedures [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 44

    Procedure 1 Diagnostic Test Program Execution Check.......49 2.7.2 Procedure 2 Connector Check and Replacement Check......49 Power SW Troubleshooting..................50 2.8.1 Procedure 1 Connector Check and Replacement Check......50 Touch sensor Troubleshooting.................51 2.9.1 Procedure 1 Diagnostic Test Program Execution Check.......51 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 45

    Web camera Troubleshooting ..................69 2.19.1 Procedure 1 Check on Windows OS............69 2.19.2 Procedure 2 Connector Check and Replacement Check......69 2.20 TV turner Troubleshooting ..................71 2.21 HDMI Troubleshooting ...................73 2.21.1 Procedure 1 Check on HDMI TV ............73 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 46

    Table 2-2 DC IN icon ......................14 Table 2-3 Error code.......................16 Table 2-4 Debug port error status...................27 Table 2-5 FDD error code and status..................41 Table 2-6 2.5” Hard disk drive error code and status.............47 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 47: Troubleshooting

    1. Phillips screwdrivers (For replacement procedures) 2. Implements for debugging port check  Toshiba MS-DOS system FD  RS-232C cross cable  Test board with debug port test cable  PC for displaying debug port test result [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 48

    There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is described in the figure as line. (2) Pin connection is described in the figure as arrow. <e.g> Connection of modem Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 49: Troubleshooting Flowchart

    Before going through the flowchart steps, verify the following:  Ask him or her to enter the password if a password is registered.  Verify with the customer that Toshiba Windows is installed on the hard disk. Non- Windows operating systems can cause the computer to malfunction.

  • Page 50

    Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 51

    Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) 2-10 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 52

    13. If an error is detected on the Bluetooth test, perform the Bluetooth Troubleshooting Procedures in Section 2.16. 14. If an error is detected on the sound test, perform the Sound Troubleshooting Procedures in Section 2.17. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-11...

  • Page 53

    18. If a malfunction is detected on the TV turner test, , perform the TV turner Troubleshooting Procedures in Section 2.21. 19. If a malfunction is detected on the HDMI test, , perform the HDMI Troubleshooting Procedures in Section 2.21. 2-12 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 54: Power Supply Troubleshooting

    The battery level is low while the system power is ON. (even intervals) Blinks orange once The system is driven by only a battery and the battery level (at being switched on) is low. Doesn’t light Any condition other than those above. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-13...

  • Page 55

    Check 2 If the DC IN icon does not light, go to Procedure 3. Check 3 If the battery icon does not light orange or blue, go to Procedure 4. NOTE: Use a supplied AC adapter G71C000A5210 (2-pin)/ G71C000A6210 (3-pin). 2-14 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 56

    On for half second Interval between data bits Off for half second The error code begins with the least significant digit. Example: Error code 11h (Error codes are given in hexadecimal format.) Start Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-15...

  • Page 57

    Current from the DC power supply is over 8.00A. Current from the DC power supply is over 0.5A when there is no load. The compensation value of [0A] is not within the limits from design data (± 481mA). 2-16 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 58: Main Battery

    E5V voltage is under 4.50V when the computer is powered on. E5V voltage is under 4.50V when the computer is booting up. E5V voltage is output when the computer is powered off. E5V voltage is under 4.50V when EV power is maintained. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-17...

  • Page 59

     PPV output Error code Meaning PPV voltage is over 1.68V. PPV voltage is under 0.00V when the computer is powered on. PPV voltage is under 0.55V when the computer is booting up. 2-18 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 60

     1R5-PGV/1R05-P1V output Error code Meaning 1R5-PGV/1R05-P1V voltage is over 1.80V. 1R5-PGV/1R05-P1V voltage is under 0.89V when the computer is powered on. 1R5-PGV/1R05-P1V voltage is under 0.89V when the computer is booting up. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-19...

  • Page 61

     Connect a new AC adapter and AC power cord. If the problem still occurs, go to Procedure 5. Check 3 In the case of error code 21h:  Go to Procedure 3. Check 4 For any other errors, go to Procedure 5. 2-20 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 62

     If the battery icon does not light, go to Check 3. Check 3 Make sure the battery pack is installed in the computer correctly. If the battery is properly installed and the battery icon still does not light, go to Procedure 4. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-21...

  • Page 63

    Battery pack may be faulty. Replace it with a new one. If the problem still occurs, perform Check 2. Check 2 System board may be faulty. Replace it with a new one. 2-22 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 64: System Board Troubleshooting

    Procedure 1 and continue with the other procedures as instructed. The procedures described in this section are: Procedure 1: Message Check Procedure 2: Debugging Port Check Procedure 3: Diagnostic Test Program Execution Check Procedure 4: Replacement Check Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-23...

  • Page 65

    The following error message appears when data stored in RAM under the resume function is lost because the battery has become discharged or the system board is damaged. Go to Procedure 3. WARNING: RESUME FAILURE. PRESS ANY KEY TO CONTINUE. 2-24 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 66

    (16) PIC #1 ERROR (17) PIC #2 ERROR (18) KBC ERROR (19) HDC ERROR (20) HDD #0 ERROR (21) HDD #1 ERROR (22) NO FDD ERROR (23) TIMER INTERRUPT ERROR (24) RTC UPDATE ERROR Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-25...

  • Page 67

    D port into FDD and input “FD starting drive:>dport”.) The D port status is displayed in the following form; 6. When the D port status is FFFFh (normal status), go to Procedure 4. 2-26 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 68

    IC3002(BIOS ROM) F006 IC3200(EC/KBC) EC/KBC(EC)、 F007 BIOS ROM check IC3001、 BIOSROM IC3002(BIOS ROM) IC3001、 F008 BIOS ROM check 2 BIOSROM IC3002(BIOS ROM) The end of Boot Block F009 processing. Shift to IRT. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-27...

  • Page 69

    (RAM Conn.) F104 BIOS processing reading IC1600 (ICH) BIOSROM, RAM IC3001,IC3002 (BIOS ROM) ROM read error IC3300 (TPM) IC3200 (EC/KBC)、 EC/KBC(EC), TPM、 IC3201(EEPROM)、 The check of BIOS processing F105 IS1050 (CPU Socket) 2-28 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 70

    IC3200 (EC/KBC) setup of MCH RAM,BIOSROM,VGA (CECC) Thermal control setup Initialization of KBC and CECC Display setup BIOS processing reading 3 setup of built-in LAN PCI Express initialization Initialization of a sound Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-29...

  • Page 71

    CN8810 (1st Battery (E2PROM) Conn.) IC1200 (VGA) EC/KBC(EC)、VGA、 CN1400,CN1410 Display setup F111 F101 (RAM Conn.) IC3200 (EC/KBC) BIOS ROM check IC1200 (MCH, VGA) EC/KBC(EC)、VGA、 CN1400,CN1410 MCH(MEM I/O)、 F112 (RAM Conn.) Display setup 2-30 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 72

    IC3001,IC3002 (BIOS LAN initialization (PCI register), VGA, F120 F101 ROM) CPU、BIOSROM IC4000 (LAN CMOS initialization Controller) Display setup F121 F101 ICH (I/O of CMOS and IS1050 (CPU Socket) MEM), VGA, EC/KBC IC1200 (VGA) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-31...

  • Page 73

    CN1900 (HDD Conn.) Display setup F128 IC1200 (VGA) CN1400, CN1410 setup of RAM data F129 (RAM Conn.) A setup of RAM data FFFF MCH (PCI register), IS1050 (CPU Socket) F104 CPU, RAM, IC1200 (MCH) 2-32 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 74

    Troubleshooting Procedures F105 A setup of CPU and MCH EC/KBC(KBC) CN1400,CN1410 (RAM Conn.) IC3200 (EC/KBC) CPU setup KBC setup Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-33...

  • Page 75

    PCI device Display preservation Preservation of ICH (PIC) Preservation of ICH (DMAC) F13E Display setup (Boot) VGA, HDD, ICH (IDE F141 controller) HDD setup (Boot) F142 F143 setup of a sound F144 EC/KBC(EC) 2-34 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 76

    Troubleshooting Procedures F145 F146 CPU setup F147 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-35...

  • Page 77

    Part number data distinction CECC, ICH(), MCH, RAM, BIOSROM, VGA CMOS check Clock generator setup CPU initialization EC data reading BIOS processing reading 2 setup of ICH (IDE) setup of ICH (Azalia) setup of MCH 2-36 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 78

    Password processing ICH (USB controller), F133 A setup of ICH (DMAC) ICH(DMAC) F134 A setup of ICH (PCI) ICH (CMOS, MEM I/OS, PIT controller, PIC CPU setup controller), EC/KBC (EC, KBC), RAM, BIOSROM, Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-37...

  • Page 79

    If any other D port status error code is displayed, perform Procedure 3. D port error code is as follows: Error code Contents F003h or F004h SC initialization error F00Bh BIOS update error F117h Exception check error F121h Clock generator error 2-38 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 80

    If an error is detected during these tests, go to Procedure 4. 2.4.4 Procedure 4 Replacement Check System board may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and replace system board with a new one. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-39...

  • Page 81: Usb Fdd Troubleshooting

    Procedure 2. Detailed operation is given in Chapter 3, Tests and Diagnostics. If the test program cannot be executed on the computer, go to Procedure 3. 2-40 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 82

    “write enable”. If any other message appears, perform Check 2. Write protected Check 2 Make sure the floppy disk is formatted correctly. If it is, go to Procedure 3. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-41...

  • Page 83

    1. Cable can not be disconnected from the connector. 2. Cable is connected straight to the connector. 3. Cable is connected all the way seated in the connector. 4. Cable or connector can not be broken. 2-42 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 84

    USB FDD may be faulty. Replace it with a new one. If the problem still occurs, perform Check 4 Check 4 System board and USB / Sound board may be faulty. Replace it with a new one following the steps in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-43...

  • Page 85: Hdd Troubleshooting

    User’s Manual. 2.6.1 Procedure 1 Partition Check Insert the Toshiba DOS system disk and start the computer. Perform the following checks: Input C: and press Enter. If you cannot change to drive C, go to Check 2. If you Check 1 can change to drive C, go to Procedure 2.

  • Page 86

    2.5” HDD(s) and the connector(s) of system board may be defective (Refer to the steps described in Chapter 4, Replacement Procedures for disassembling.). Insert HDD(s) to the connector(s) firmly. If it is (or they are) firmly connected, go to Procedure 3. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-45...

  • Page 87

    Using the Diagnostic Disk, format the 2.5” HDD with a format option (physical format). If HDD is formatted, set the 2.5” HDD partition using DOS FDISK command. If you cannot format the 2.5” HDD using the Tests and Diagnostic program, go to Procedure 4. 2-46 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 88

    HDD - ECC RECOVER ENABLE HDD - DRIVE NOT READY HDD - WRITE FAULT HDD - STATUS ERROR HDD - BAD SECTOR HDD - ACCESS TIME ERROR HDD - NO HDD HDD - DMA CRC ERROR Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-47...

  • Page 89

    Chapter 4, Replacement Procedures and check the operation. If the problem still exists, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures 2-48 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 90: Keyboard Troubleshooting

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-49...

  • Page 91: Power Sw Troubleshooting

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-50 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 92: Touch Sensor Troubleshooting

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check Check 4 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-51...

  • Page 93: Touch Pad Troubleshooting

    Make sure the cables are firmly connected to the Touch pad, Touch Pad SW board and system board. If the connection is loose, reconnect firmly and repeat Procedure 1. If the problem still occurs, go to Check 2. 2-52 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 94

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-53...

  • Page 95: Touch Pad En-sw Troubleshooting

    Make sure the cables are firmly connected to the Touch pad En-SW board and system board. If the connection is loose, reconnect firmly and repeat Procedure 1. If the problem still occurs, go to Check 2. 2-54 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 96

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3 Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-55...

  • Page 97: Display Troubleshooting

    Make sure the LCD cable is securely connected to CN5300 on the system board. If the connection is loose, reconnect firmly and restart the computer. If there is still an error, go to Procedure 3. 2-56 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 98

    Replacement Procedures and test the display again. If the problem still exists, perform Check 3 Check 3 The display controller on the system board may be damaged. Replace the system board with a new one following the instructions in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-57...

  • Page 99: Optical Disk Drive Troubleshooting

    Make sure the SATA ODD is firmly connected to CN1950 on the system board. If any of the connections are loose, reconnect firmly and repeat Procedure 1. If there is still an error, go to Check 2. 2-58 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 100

    Chapter 4, Replacement Procedures. If the problem still exists, perform Check 3. Check 3 System board may be faulty. Replace it with new one following the instructions in Chapter 4, Replacement Procedure. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-59...

  • Page 101: Lan Troubleshooting

    LAN cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instruction in Chapter 4, Replacement Procedure. 2-60 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 102: Wireless Lan Troubleshooting

    LAN. Perform the test following the instructions described in Chapter 3, Tests and Diagnostics. If the computer passes the test, the function is correctly working. If the computer does not pass the test, perform Procedure 2. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-61...

  • Page 103

    Wireless LAN card. If wireless LAN antenna cables are not connected properly, connect them firmly and perform Procedure 1. If the problem still occurs, go to the procedure 3. 2-62 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 104

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-63...

  • Page 105: Bluetooth Troubleshooting

    Make sure the Bluetooth is firmly connected to CN4440 on the system board. If any of the connections are loose, reconnect firmly and repeat Procedure 1. If there is still an error, go to Check 2. 2-64 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 106

    The Bluetooth cable may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. If the problem still exists, perform Check 4. Check 4 The system board may be damaged. Replace it with a new one following the Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-65...

  • Page 107: Sound Troubleshooting

    The connection of sound system is shown in the following figure. As the connection may be defective, disassemble the computer and check each connection. If the problem still occurs, go to Procedure 3. 2-66 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 108

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 7 Check 7 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-67...

  • Page 109: Bridge Media Slot Troubleshooting

    Chapter 4 Replacement Procedures. If the problem continues, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the step in Chapter 4 Replacement Procedures. 2-68 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 110: Web Camera Troubleshooting

    Chapter 4 and perform the following checks. Check 1 If the connection is loose, reconnect it firmly and check each connection. If the problem still occurs, perform Check 2. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-69...

  • Page 111

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3 Check 3 System board may be faulty. Replace it with a new one following the step in Chapter 4 Replacement Procedures. 2-70 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 112: Tv Turner Troubleshooting

    Check 3 The TV turner card antenna cable may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. If the problem still exists, perform Check 4. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-71...

  • Page 113

    Chapter 4, Replacement Procedures and check the operation. If the problem still exists, perform Check 5. Check 5 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-72 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 114: Hdmi Troubleshooting

    When connecting or disconnecting an HDMI device to or from the computer, only do so when the computer is turned on or when the computer is completely turned off. Do not do so when the computer is in Sleep Mode or Hibernation Mod Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 2-73...

  • Page 115: Settings For Display Video On Hdmi

    2. Click Appearance and Personalization. 3. Click Display. 4. Click Change display settings. 5. Click Advanced settings. 6. Click List All Modes. 7. Select the one of the below selection at "List All Modes". 2-74 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 116

    Some models are supported with the REGZA Link (PC Control). Using REGZA Link (PC Control) Toshiba notebooks with REGZA Link (PC Control) include a Toshiba utility dedicated to take advantage of its capabilities which can allow you to: ■ Use the TV remote control to output the computer screen onto the TV screen./ ■...

  • Page 117

    Chapter 4, Replacement Procedures and check the operation. If the problem still exists, perform Check 5. Check 5 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-76 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 118

    Tests and Diagnostics Chapter 3 Tests and Diagnostics Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 119

    Tests and Diagnostics [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 120

    Error Code and Error Status Names................. 3-41 3.19 Hard Disk Test Detail Status ................... 3-44 3.20 ONLY ONE TEST....................3-46 3.20.1 Program Description ................3-46 3.20.2 Operations ..................3-46 3.21 Head Cleaning......................3-57 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 121

    Maintenance (WinPE&FreeDos) Test Program Operation ........3-94 3.32.1 . Outline ....................3-94 3.32.2 Outline of Specification ..............3-94 3.33 . Starting TOSHIBA Test & Diagnostic ..............3-95 3.33.1 Starting from CD ................3-95 3.34 . Windows PE T&D ....................3-97 [CONFIDENTIAL]...

  • Page 122

    Details of HTML Log File ............... 3-171 3.37 Maintenance (WinPE&FreeDos) Test Program Supplementary Information ..3-174 3.37.1 Outline ....................3-174 3.37.2 Notices and Restrictions (Win PE T&D) ......... 3-174 3.37.3 Notices and Restrictions (Freedos) ..........3-175 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 123

    Table 3-1 Subtest names (1/2) .................... 3-18 Table 3-2 Error codes and error status names (1/3)............3-41 Table 3-3 Hard disk controller status register contents ............3-44 Table 3-4 HDC Error register contents................3-45 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 124: The Diagnostic Test

    The DIAGNOSTIC TEST MENU contains the following functional tests:  SYSTEM TEST  MEMORY TEST  KEYBOARD TEST  DISPLAY TEST  FLOPPY DISK TEST  PRINTER TEST [It is not supported ]  ASYNC TEST  HARD DISK TEST Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 125

     A cleaning kit to clean the floppy disk drive heads (Head Cleaning)  An external display supporting monitor ID (Expansion test)  A CD test media TOSHIBA CD-ROM TEST DISK or ABEX TEST CD-ROM (Sound test)  A DVD test media (DVD-ROM TEST DISK TSD-1) (Sound test) ...

  • Page 126

     The Diagnostics Disk (Main T&D) 3.1.3 Heatrun test program The heatrun test starts automatically after the selection. You will need the following equipment to perform this program.  The Diagnostics Disk (Main T&D) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 127: Executing The Diagnostic Test

    2. After replacing the system board, execute the subtest04 “DMI information recovery” and subtest08 “System configuration display” in 3.4 Setting of the hardware configuration in order to copy the DMI information and system information from the floppy disk. 3-10 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 128

    Set the highlight bar to 3, and press Enter. The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX DIAGNOSTICS MENU : 1 - DIAGNOSTIC TEST 2 – ONLY ONE TEST...

  • Page 129

    Set the highlight bar to 1, and press Enter. The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX DIAGNOSTIC TEST MENU : 1 - SYSTEM TEST 2 - MEMORY TEST...

  • Page 130

    Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle ends and restarts the test cycle. Selecting NO returns the process to the subtest menu after the test is complete. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-13...

  • Page 131

    For more details on this test, refer to the section 3.3. 3.2.3 Heatrun test program Heatrun test starts executing the same subtest as 3.23 RUNNING TEST. For more details on this test, refer to the section 3.4. 3-14 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 132: Setting Of The Hardware Configuration

    5. “Enter Bundle Number?” is displayed. Input the computer’s PCN/Bundle number and press Enter. (e.g. PMSREQ3Q34H/S0123456789) 6. “Write data OK (Y/N)?” is displayed. To write the DMI information to the Flash ROM, press Y, and then Enter. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-15...

  • Page 133

    This subtest writes all the DMI data in the floppy disk into the new PCB. NOTE: Since the data of UUID is updated every time when this subtest, DMI information recovery, is done, the saved UUID data is not written. 3-16 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 134: Heatrun Test

    For more details on the procedure and test content, refer to RUNNING TEST. When the heatrun test ends, following message appears in the display. ************************************************ HEATRUN TEST END ************************************************ Press any key to continue... Press any key and return to the startup menu. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-17...

  • Page 135: Subtest Names

    Gradation for LCD Gradation & Mode test for VGA All dot on/off for LCD “H” pattern display LCD Brightness FLOPPY DISK Sequential read Sequential read/write Random address/data Write specified address Read specified address 3-18 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 136

    W-R-C specified address REAL TIMER Real time Backup memory Real time carry NDP test EXPANSION PCMCIA wraparound [Not supported] RGB monitor ID CD-ROM Sequential read /DVD-ROM Read specified address Random address/data RW 1point W/R/C Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-19...

  • Page 137: System Test

    The following message will appear. *** Test Fan Revolution High speed Start Make sure the fan rotates at high speed, then press Enter. After a while, the fan rotating will stop. Subtest 03 Geyserville 3-20 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 138

    Serial Number : XXXXXXXX UUID Number : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Model Number : XXXXXX-XXXXX PCN/BND Number : XXXXXXXXXX Press [Enter] to EXIT To exit this subtest and return to the SYSTEM test menu, press Enter. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-21...

  • Page 139: Memory Test

    Data: FFh, FFh, FFh, FFh, FFh, 00h, 00h, 00h, 00h, FFh, FFh, FFh, 00h, FFh, 00h, 00h, FFh, 00h, 00h, FFh, FFh, FFh, FFh, 00h, 00h, 00h, AAh 3-22 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 140: Keyboard Test

    Appendix D. KEYBOARD TEST IN PROGRESS 302000 Scan code Character code Keytop Ins Lock Caps Lock Num Lock Scroll Lock Ctrl Left Shift Right Shift PRESS [Enter] KEY Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-23...

  • Page 141: Display Test

    This subtest displays bands of gradations for mixed colors, then for red, green, and blue. Next, it displays eight solid colors full screen: red, semi-red, green, semi-green, blue, semi-blue, white, and semi-white. Each color displays for three seconds. 3-24 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 142

    Mode 118. Subtest 05 All dot on/off for LCD This subtest displays an all-white screen then an all-black screen. The display changes automatically every three seconds, then returns to the DISPLAY TEST menu. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-25...

  • Page 143

    Super-Bright —> Bright —> Semi-Bright —> Bright —> Super-Bright After displaying with Super-Bright of LCD brightness, return to the DISPLAY TEST menu. Subtest 08 LCD EDID Information (not use) Subtest 09 External EDID read/compare (not use) 3-26 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 144: Floppy Disk Test

    SUB-TEST MENU : 01 - Sequential read 02 - Sequential read/write 03 - Random address/data 04 - Write specified address 05 - Read specified address 99 - Exit to DIAGNOSTIC TEST MENU Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-27...

  • Page 145

    This subtest writes the data specified by an operator to a specified track, head, and address. Subtest 05 Read specified address This subtest reads data from a track, head, and address specified by an operator. 3-28 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 146: Printer Test

    Select the printer channel number, and press Enter to execute the selected subtest. Subtest 01 Ripple Pattern This subtest prints characters for codes 20h through 7Eh line-by-line while shifting one character to the left at the beginning of each new line. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-29...

  • Page 147

    This subtest checks the output and bi-directional modes of the data control and status lines through the parallel port wraparound connector (34M741986G01). (Both output and bi-directional modes are tested.) 3-30 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 148: Async Test

    Subtest 03 Wraparound (board) NOTE: To execute this subtest, a RS-232C wraparound connector must be connected to the RS-232C port. This subtest checks the data send/receive function through the wraparound connector. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-31...

  • Page 149: Hard Disk Test

    3. This message is used to select whether or not the HDD status is displayed on the screen. The HDC status is described in section 3.20. Select 1 or 2. Detail status display (1:no, 2:yes) 3-32 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 150

    2. Reverse sequential 3. Random Subtest 03 Random address/data This subtest writes random data in a random length to random addresses. This data is then read and compared to the original data. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-33...

  • Page 151

    This subtest writes specified 2-byte data to all of the cylinders on the HDD. Subtest 09 W-R-C specified address This subtest writes data to a specified cylinder and head on the HDD, then reads the data and compares it to the original data. 3-34 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 152: Real Timer Test

    Writes 1-bit of “off” data (FEh through 7Fh) to address 0Eh through 7Fh Writes the data pattern AAh and 55h to the address 0Eh to 7Fh Then the subtest reads and compares this data with the original data. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-35...

  • Page 153

    The real time increments are automatically executed and the following is displayed: Current date : 01-01-2000 Current time : 00:00:00 PRESS [Enter] KEY TO EXIT TEST To exit the test, press Enter. 3-36 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 154: Ndp Test

    If exists, the bit is “1”. Test only when the high-speed operation processor exists. Subtest 01 NDP test This test checks the following functions of NDP:  Control word  Status word  Bus  Addition  Multiplication Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-37...

  • Page 155: Expansion Test

    –– Speaker line 00004 40,80 Wait line (40<xx<80) 00005 Other lines (BSY#, BVD1) NN=21, 00 NOTE: Select the subtest number01, The following message will appear: Test slot number select (1:slot0, 2:slot1, 0:slot0&1)? 3-38 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 156

    Connect a wraparound connector to CRT monitor for the test of ID acquisition. This subtest is executed by using VESA command. CAUTION: It becomes NG because the priority is given to the internal monitor in a simultaneous display mode. Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-39...

  • Page 157: Cd-rom/dvd-rom Test

    To execute the CD-ROM/DVD-ROM test, select 12 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. NOTE: For the subtest 01, 02 and 03, use the TOSHIBA CD-ROM TEST DISK TDY-01 or ABEX TEST CD-ROM TCDR-702 and DVD-ROM TEST DISK TSD-1. For the subtest 04, use a CD-RW on the market.

  • Page 158: Error Code And Error Status Names

    HUB - CLEAR FEATURE ERROR HUB - CLEAR FEATURE1 ERROR HUB - SET FEATURE ERROR(Enab.) HUB - CLEAR FEATURE2 ERROR USB - OVER CURRENT ERROR USB - GET DESCR.ERROR(SECOND) Display VRAM SIZE NOT SUPPORT Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-41...

  • Page 159

    HDD - RECORD NOT FOUND ERROR HDD - ECC ERROR HDD - HDC ERROR HDD - SEEK ERROR HDD - TIME OUT ERROR HDD - ECC RECOVER ENABLE HDD - DRIVE NOT READY 3-42 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 160

    ZV_CONT# ERROR CD-ROM BAD COMMAND /DVD-ROM ILLEGAL LENGTH UNIT ATTENTION MEDIA CHANGE REQUEST MEDIA DETECTED ADDITIMAL SENSE BOUNDARY ERROR CORRECTED DATA ERROR DRIVE NOT READY SEEK ERROR TIME OUT RESET ERROR ADDRESS ERROR Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-43...

  • Page 161: Hard Disk Test Detail Status

    (Corrected data) “1” … Correctable data error is corrected. “0” … Not used (Index) “1” … Index is sensed. “0” … Normal (Error) “1” … The previous command was terminated with an error. 3-44 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 162

    “1” … Illegal command error or command abort. “0” … The hard disk found track 0 during a recalibrate (Track 0) command. “1” … The hard disk could not find track 0 during a recalibrate command. —— Not used Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-45...

  • Page 163: Only One Test

    99 .... Exit to Common Test **************************************************************** ..Press test number [1-9] ? Select the subtest number you want to test and press Enter. To return to the DIAGNOSTIC TEST menu, select 9 and press Enter. 3-46 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 164

    Holding a key down enables the auto-repeat function that causes the key’s display character to blink. Press Del + Enter to end the test. IF TEST OK, Press [Dell][Enter]key Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-47...

  • Page 165

    Holding a key down enables the auto-repeat function that causes the key’s display character to blink. Press Del + Enter (Ten key) to end the test. [ Ten key test] IF TEST OK, Press [Dell][Enter]key 3-48 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 166

    Confirm the LED of HDD status blinks properly. Press any key and following message appears in the display. [Caps/Num/Overlay BT/W-LAN LED test] Confirm each LED lights properly. Press [Caps Lock ] key ! ...Caps (on/off) Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-49...

  • Page 167

    (0-4) from the left side. (Refer to the following picture.) Touch sensor buttons Press the indicated touch sensor button [0], then following message will appear in the display. Press Function button [1] 3-50 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 168

    Pressing any key, indication of pressing touch sensor button will appear in the display again. Unless the right touch sensor button is pressed, this operation is repeated. After checking all touch sensor button, return to the ONLY ONE TEST menu automatically. Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-51...

  • Page 169

    <BUTTONS> displays appear on the right side one by one. The parameters appear above the <BUTTONS> (1) or (2) corresponding to the pressed touch pad switch highlights. To end this subtest, press two touch pad switches at the same time. 3-52 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 170

    FAN High-speed---> Target High: 3800 Rpm Result High: XXXX Rpm OK! OK message appears in the display if the test ends without a defective. NG message appears in the display if a defective is found during the test. Subtest 09 E2PROM (MAC/GUID) Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-53...

  • Page 171

    The following message appears in the display. Volume button test Press Volume [ Up(+) ] Please press Volume button to the Right. After checking , return to the ONLY ONE TEST menu automatically. Volume 3-54 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 172

    Set the machine Vertical plane against the vertical plane with the Front upward Flat desk The figure below shows the name and position of each side. (heaven surface) Right side Back Front Left side Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-55...

  • Page 173

    When any trouble in the above setting is found, the following message appears and the test halts. Then press Enter and return to the Only One Test menu. ** Setting ERROR! ** Press [Enter] key 3-56 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 174: Head Cleaning

    2. Remove the Diagnostics Disk from the FDD, then insert the cleaning disk and press Enter. 3. When the message appears, the FDD head cleaning has begun. “cleaning start” 4. The display automatically returns to the DIAGNOSTIC MENU when the program is completed. Qosmio F60 Series Maintenance Manual (960-796 [CONFIDENTIAL]) 3-57...

  • Page 175: Log Utilities

    Tests and Diagnostics 3.22 Log Utilities 3.22.1 Function Description This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy disk or output the data to a printer. Connect USB FDD, when you perform the DIAGNOSTIC PROGRAM from the NOTE: DVD-ROM.

  • Page 176

    Tests and Diagnostics 3.22.2 Operations Select 5 and press Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk. The error information is displayed in the following format: XXXXX ERRORS TS-NO PASS STS ADDR WD RD HSTS [ERROR STATUS NAME] FDD 02 0000 103 00001 00 00 0000 FDD-WRITE PROTECTED...

  • Page 177: Running Test

    Tests and Diagnostics 3.23 Running Test 3.23.1 Function Description This function automatically executes the following tests in sequence: 1. System test (subtest 01) 2. Memory test (subtests 01, 02) 3. Display test (subtest 01) 4. Real timer test (subtest 02) 5.

  • Page 178: Floppy Disk Drive Utilities

    This program displays the contents of the floppy disk and the designated sectors of the hard disk on the display. 4. HDD ID READ This program reads the hard disk ID and displays hard disk information. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-61...

  • Page 179

    After the floppy disk is formatted, the following message will appear: Format complete Another format (1:Yes/2:No) ? (e) Typing 1 displays the message from step (c) above. Typing 2 returns the test to the DIAGNOSTIC MENU. 3-62 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 180

    Copy complete Another copy (1:Yes/2:No) ? (g) To copy another disk, type 1 and the message from step (a) is displayed again. Entering 2 returns the test program to the DIAGNOSTIC MENU. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-63...

  • Page 181

    (i) Select a drive number and the following message will be displayed. ---Max. address --- [LBA ] = XXXXXXXXX LBA number ???????? (j) Set the LBA number you want to dump. The system will access the disk and dump a list. 3-64 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 182

    [Drive #2] Model No. = XXXXXXX = XXXXXXX NOTE: Only when a 2nd HDD is installed, [Drive #2] message appears in the display. Press Enter to return to the FDD UTILITIES MENU. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-65...

  • Page 183: System Configuration

    14. ASYNC Adapter 15. Math co-processors 16. Floppy Disk Drive [Track/Head/Sector] 17. Hard Disk Drive [Sector/Drive size/Manufacture code] 18. Optical Disk Drive [Maker/Drive type/Manufacture code/Product code] 19. T&D total version 20. Date/Time 3-66 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 184

    = XXXXX, (XXXXX GB) [XXXXXXXXXXXXXXXXX] - ODD = XXXX XXXXXXXX XXXXXXXXX [XXXXXXXXXXXX] - T&D Total Version = VX.XX Press [Enter] Key [Date = XXXX-YY-ZZ, XX:YY:ZZ] Press Enter to return to the DIAGNOSTIC MENU. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-67...

  • Page 185: Wireless Lan Test Program (atheros)

    1. Slide the wireless communication switch to “ON” position. 2. Check the card type according to the following procedure: Click [Start] -> [All Programs] -> [TOSHIBA] -> [Utilities] -> [PC Diagnostic Tool]. Check the “Network”. If the “ ” , “...

  • Page 186

    LAN card or no available access point is found. In this case, check the antenna cable connection to the wireless LAN card by disassembling the computer following the steps described in Chapter 4, Replacement Procedures. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-69...

  • Page 187: Wireless Lan Test Program (intel-made A/b/g/n Setting Up Of Ref Pc)

    1. Copy the R100VWL5.ZIP (wireless LAN program for maintenance, common to Calexico, Golan and Kedron) to REF PC and unzip it. Then “Clx_Res” folder is created and the following three programs are copied in it. PACKET.SYS PACKET.INF WTWINSVR.EXE 3-70 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 188

    Open “My Computer” window and click “My Network places” on the left column. Click “View network connections” on the left column. The “Network Connections” window appears. Double-click “Local Area Connection”. Network Connections window Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-71...

  • Page 189

    Select “Protocol” on the “Select Network Component Type” window and click “Add…” button. Select Network Component Type window Click “Have Disk…” button on the “Select Network Protocol” window. Select Network Protocol window 3-72 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 190

    When the installation is completed, “Local Area Connection Properties” will appear. Confirm that the “DDK PACKET Protocol“ is added. Click “Close” button to finish the setup of REF PC. Local Area Connection Properties window Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-73...

  • Page 191

    Then the following screen will appear. Start the test program on DUT. Screen while running the wtwinsvr program The REF PC is waiting for the start of the test program on DUT. 3-74 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 192: Wireless Lan Test Program On Dut Pc (intel-made)

    6 : Communication test of 11b mode for 5300/5350 module 7 : Communication test of 11g mode for 5300/5350 module 8 : All the tests of WiFi Link 5300/5350 Module (MAC Check,communication test) ************************************************************* Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-75...

  • Page 193

    When pressing any key, the following message is displayed **************************************** 11b Communication Test : NG !! tx=a antenna : rx = a antenna **************************************** Press any key and return to the test menu. 3-76 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 194

    When pressing any key, the following message is displayed **************************************** 11a Communication Test : NG !! tx=a antenna : rx = a antenna **************************************** Press any key and return to the test menu. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-77...

  • Page 195

    All the tests is executed in the order of Communication test of 11a mode, Communication test of 11b mode and Communication test of 11g mode. When any error has detected, the test finishes. 3-78 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 196: Lan/modem/bluetooth/ieee1394 Test Program

    ICHx GbE (i82540) Diagnostics program ##### #################################################################### 1 .... (i82562 + ICHx) 2 .... (GbE) ******************************************************************** ..Press test number [1-2] ? Press the number you want to test and press Enter. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-79...

  • Page 197

    < TRANSMIT > < RECEIVE > NOTE: The menu displayed by your computer may be slightly different from the one shown above. If a defective is found, NG message will appear in the display. 3-80 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 198

    1000Base Auto-negotiation TxRx Test CE Test Complete NOTE: The menu displayed by your computer may be slightly different from the one shown above. If a defective is found, NG message will appear in the display. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-81...

  • Page 199

    RJ11 Connection Check (LED) (Operator’s Check LED) test will be executed, and the following message will appear: ...Press Key (Y = OK , N =NG) If the color in the LED of the connection checker is orange, press Y, otherwise, press N. 3-82 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 200

    (A mobile phone with the Bluetooth function is also available.) ・ A Bluetooth card should be installed on the target computer. Install the Bluetooth function by clicking [All Programs] -> [TOSHIBA] -> [Bluetooth] -> [Bluetooth Settings]. Test procedure 1.

  • Page 201

    If the BT address of the responder device does not appear, check the Bluetooth card condition and antenna cable connection to the Bluetooth card by disassembling the computer following the steps described in Chapter 4, Replacement Procedures. 3-84 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 202

    This program is executed in the responder machine to initialize the responder machine with the IEEE1394 cable connected to the target machine before executing subtest 01. Subtest03 1394 GUID Display This program checks the GUID of IEEE1394. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-85...

  • Page 203: Sound Test Program

    Sound TEST disk cannot be used in Satellite Pro S300, TECRA A10/S10/P10. Therefore, please test the sound on Windows OS. 1) Play a music file. 2) click TOSHIBA-> utility -> "PC diagnostic tool." to test the sound Please check operation of speakers by one of methods. 3-86...

  • Page 204: Bios Setup

    4. CPU Speed 5. HDD1/SSD1 6. ODD 7. Total Memory Size 8. System BIOS Version 9. EC Version 10. Language Security menu 11. User Password 12. Supervisor Password 13. HDD1/SSD1 Password Mode Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-87...

  • Page 205: Power Management Menu, Advanced Menu, Exit Menu

    29. USB KB/Mouse Legacy Emulation 30. USB-FDD Legacy Emulation 31. USB Memory BIOS Support Type 32. Change Boot Order 33. System Configuration Exit menu ■ Load Setup Defaults ■ Discard Changes ■ Exit Saving Changes 3-88 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 206

    Tests and Diagnostics 3.31.2 Accessing the SETUP Program Turn on the power SW. then press F2. The following display appears. Main menu screen Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-89...

  • Page 207

    Tests and Diagnostics Security menu screen Power Management menu screen 3-90 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 208: Exit Menu Screen

    Tests and Diagnostics Advanced menu screen Exit menu screen Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-91...

  • Page 209

    The Factory Preset Configuration When you access SETUP, the current configuration is displayed. 1. To show the factory preset configuration, press [F9] key. 2. To accept the default settings, press [Y] key. 3-92 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 210

    Tests and Diagnostics How to change setup Options Since a help is displayed on the right-hand side of each menu screen, it is referred to. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-93...

  • Page 211: Maintenance (winpe&freedos) Test Program Operation

    Tests and Diagnostics 3.32 Maintenance (WinPE&FreeDos) Test Program Operation 3.32.1 . Outline This document explains how to operate T&D that is released through TOSHIBA Test & Diagnostic CD. 3.32.2 Outline of Specification The TOSHIBA Test & Diagnostic CD already released includes WindowsPE T&D (hereafter, referred as WinPE T&D) and Freedos T&D (hereafter, referred as Fdos T&D) and...

  • Page 212: Starting Toshiba Test & Diagnostic

    3.33 . Starting TOSHIBA Test & Diagnostic 3.33.1 Starting from CD 1. Load the TOSHIBA Test & Diagnostic Discs into the optical disc drive and turn off the computer's power. 2. While holding down F12 key on the keyboard, turn on your computer - when the logo screen appears, release the F12 key.

  • Page 213

    Enter key again on this screen. If the Enter key is pressed, WindowsPE will start. The key different from an Enter key is pressed. Or a press of no keys will start Windows of built-in HDD. 3-96 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 214: Windows Pe T&d

    To execute the above test, start the machine after connecting all of the equipment * In particular, if LAN router is connected after OS is activated, IP address is not assigned to Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-97...

  • Page 215

    After the startup of the OS, unless CD volume name is WINTDCD or USB volume name is WINTDUSB, WinPE T&D does not start automatically. Note: If the system starts up from the TOSHIBA Test & Diagnostic CD, WinPE T&D in the USB memory starts when the USB memory created in section 3-5-2 is connected.

  • Page 216

    Tests and Diagnostics 3.34.3 System Information Menu If you set the TOSHIBA Test & Diagnostic CD to the ODD drive and run WinPE T&D, the following test selection screen is displayed. (For further details, refer to Chapter 2.) Hereinafter, System Information will be described in detail.

  • Page 217

    CPU Socket0 - 1 Displays Socket Name of the CPU. CPU Description0-1 Displays Processor Name of the CPU and CPUID (Family, Model, Stepping). L2 Cache0 - 1 Displays the second cache (KB) of the CPU 3-100 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 218

    Displays the name and the capacity (GB) of IEEE1394-HDD connected to the PC. Other Disk0 - 3 Displays the name and the capacity (GB) of the HDD other than the above three HDD types which is connected to the PC Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-101...

  • Page 219

    If more than one keyboard is connected, the information of up to 4 keyboards are displayed. Mouse0 - 3 Displays the name of the mouse connected to the PC. For the touchpad, (Touchpad) follows the mouse name. 3-102 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 220

    ▼ [LOG] button Displays the test result or the menu to save it. The detailed explanation will be given in section 3-4-5. ▼ [STOP] button Stops the test during the execution of it. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-103...

  • Page 221

    Note: The test item grayed out indicates that the test environment is not ready and its explanation is displayed in the Status field. The following table lists the statuses to be displayed on the screen and explains their meanings. 3-104 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 222

    This is displayed before the start of every test or if the test is skipped. The test was successful The test failed ▼ ERROR …Updates the number of error occurrences in each test in real time during a test and displays it. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-105...

  • Page 223

    [STOP] button is clicked, the test is terminated Note: The test item grayed out indicates that the test is not ready yet and you cannot select 3-106 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 224

    This function saves test log files to the specified storage. 1) Display of log file If you click on the log file name displayed on the screen, the content of the log file is displayed in the text format. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-107...

  • Page 225

    If no log file is selected, the following warning message appears on the screen, If the [OK] button is clicked without selecting a destination, the following warning message appears on the screen. 3-108 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 226

    2-4) If the log file is successfully saved to the destination, the following confirmation screen is displayed and click the [OK] button. 2-5) After saving the log files, click the [Close] button to close the Management screen. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-109...

  • Page 227

    ▼ Utility Item … A list of the utilities that this T&D supports ▼ Detail … Explanation of each utility is described. If you point to the utility which you wish to execute and click it, the utility starts. Utility item Detail of utility 3-110 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 228

    : Displays the following screen if FreeDOS is selected. [FreeDOS] Use the arrow keys to operate on the screen. Move the cursor to [FreeDOS for TD] and press the Enter key. If [reboot] is selected, the PC is rebooted. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-111...

  • Page 229

    Tests and Diagnostics This utility extracts the contents of TOSHIBA Test & Diagnostic to the specified USB memory to provide the environment which allows you to start the test from the USB memory and conduct it. If the utility is executed, the following screen is displayed.

  • Page 230

    ▼ Attribute ID and Name … Displays Attribute ID and the content of the Attribute IDs. ▼ Data value … Displays Attribute value and Worst value. ▼ RAW data … Displays raw data. Note: The SMART information is only for reference. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-113...

  • Page 231

    Reallocation event count Number of alternative sector events Current pending sector count Number of currently defective sectors Off-line scan uncorrectable sector Number of sectors that could not be count corrected during Off-line scan 3-114 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 232

    Tests and Diagnostics UltraDMA CRC error count Number of CRC errors occurred during data transference in the UltraDMA mode DFh Load/Unload retry count Number of reloads of more than a certain amount of times Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-115...

  • Page 233

    If an error occurs even in an HDD, the error count is incremented. ■ In the case of PASS The Pass Count on the test screen is zoomed in and (OK) is displayed in the Result field on the WinPE T&D screen. 3-116 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 234

    Failed in the HDD read Error.Address=XX command. XX is LAB value. Read Hdd Check Size Error The size read by the HDD Address=XX read command does not correspond to the specified size. XX is LAB value. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-117...

  • Page 235

    The file name of the file in which an error occurred is printed to the log of WinPE T&D. (The following example indicates the case where an error was found in file A .) Name of file being verified [HDDL] ERROR0000=(2008/09/10, 12:00:00) C:¥file-A 3-118 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 236

    ▼ Test detail: Displays the detail of the test being executed in the order of Address Test, Stack HIght/Low Test and Burst Transfer Test. ▼ Progress status: Displays the progress status of the test with the progress bar. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-119...

  • Page 237

    Address Test. Memory Compar Error An error occurred during ( Stack High/Low Test ) Stack High/Low Test Memory Compar Error An error occurred during ( Burst Transfer Test ) Burst Transfer Test. 3-120 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 238

    SD storage device (G :) Removal disk 2) Test screen ▼ Test detail: The drive under test execution is displayed.. ▼ Progress status: Displays the progress status of the test with the progress bar. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-121...

  • Page 239

    Remarks File Access Error.xx: Failed in the file access. xx indicates drive name. Space size Error. Code (xx :) There is no sufficient free space for thefile size. xx indicates drive name. 3-122 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 240

    Detail test mode (000017FF) is the address of a data block 3) Result judgment Both of PASS and FAIL are not displayed anywhere on the ODD screen.. The result is reflected to the log on the WinPE T&D screen. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-123...

  • Page 241

    WinPE T&D screen. The Addressing data of the data in which an error occurred is printed to the log of WinPE T&D. (When an error occurs at 000007FF ) [ODD] ERROR0000=(2008/09/10, 12:00:00)000007FF 3-124 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 242

    3) Result Decision ■ In the case of PASS The PASS Count display on the test screen is zoomed in and (OK) is displayed in the Result field on the WinPE T&D screen. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-125...

  • Page 243

    In-use API error xx indicates error code. Wrote xx bytes Communication data size unmatched xx indicates reception size recvfrom failed: xx In-use API error xx indicates error code. timed out. Time out occurred. 3-126 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 244

    WinPE T&D screen. ■ In the case of FAIL The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on the WinPE T&D screen. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-127...

  • Page 245

    The detail of the error is printed to the log of WinPE T&D. More details are as shown below. Message Explanation Remarks The ALU test made an An error occurred error. duringprocessing of ALU. The FPU test made an An error occurred error. duringprocessing of FPU. 3-128 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 246

    The PASS Count display on the test screen is zoomed in and (OK) is displayed in the Result field on the WinPE T&D screen. ■ In the case of FAIL This test only performs gradation display by visual check and does not execute error judgment. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-129...

  • Page 247

    The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on the WinPE T&D screen. The detail of the error is printed to the log of WinPE T&D. More details are as shown below. 3-130 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 248

    Write File Error. Failed in writing to the file. Code(xx). zx indicates file code Note: The test causes error if the floppy disk is write-protected. Make sure that the floppy disk is not write-protected. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-131...

  • Page 249

    The PASS Count display on the test screen is zoomed in and (OK) is displayed in the Result field on the WinPE T&D screen. ■ In the case of FAIL The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on 3-132 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 250

    Remarks File Access Failed the file access Error.xx: xx indicates drive name. Space size There is no sufficient free space Error.Code(xx:) for the file with the specified size. xx indicates drive name. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-133...

  • Page 251

    All the displays are updated at once as the time reaches the year 2000. Moreover, seconds later, the validity of the setting is checked Internally and the result is judged. 3-134 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 252

    The information of the time at which an error occurred is printed to the log of WinPE T&D. More details are as shown below. (The following example indicates that a time difference of 2 seconds has occurred in the timer setting.) [TIMER] ERROR0000=(2008/09/10, 13:11:20) (TIME-1)00:00:05 (TIME-2)00:00:07 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-135...

  • Page 253

    The keyboard of PC is a test which judges whether it operates normally. ■Simple Mode / Detail Mode The same operation is carried out whichever it chooses. 2) Test screen The arrangement of a keyboard is displayed on the display of PC. 3-136 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 254

    Next, it returns to the state immediately after starting. Note: The check of the "FN" key should press "FN" and "F3" simultaneously. It does not react, even if it presses only the "FN" key. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-137...

  • Page 255

    The keyboard which can be tested is two kinds, "US Keyboard A4 Mode" and "US Keyboard A4 Mode+10Key Mode." When you test a keyboard with a ten key, choose "US Keyboard A4 Mode+10Key Mode" by the combo box of the keyboard layout upper left stage. 3-138 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 256

    WinPE T&D screen. ■ In the case of FAIL The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on the WinPE T&D screen. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-139...

  • Page 257

    The Mouse of PC is a test which judges whether it operates normally. ■Simple Mode / Detail Mode The same operation is carried out whichever it chooses. 2) Test screen If a mouse test start is carried out, the above-mentioned screen will be displayed. 3-140 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 258

    3) The cursor position is expressed in the lower part of a screen as X coordinates and Y coordinates. 4) Test items other than the cursor position become effective only on this screen. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-141...

  • Page 259

    WinPE T&D screen. ■ In the case of FAIL The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on the WinPE T&D screen. 3-142 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 260: Dos T&d

    Devices to be tested and Test devices (Abbreviated names) CPU : Central Processing Unit RAM : Random access memory ROM : Read only memory TIM : Real Timer、Backup memory(128bytes) CRT : Display unit Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-143...

  • Page 261

    Tests and Diagnostics HDD : Hard disk drive KB : Keyboard FDD : Floppy disk drive 3.35.1.2 Test program configuration This test program is configured as below: 3-144 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 262

    Sequential read Address uniqueness Random address/data Cross talk & peak shift Partial Read Write specified address Read specified address Sequential write W-R-C specified address REAL TIMER Real time Backup memory Real time carry Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-145...

  • Page 263

    3.35.2 How to start T&D 3.35.2.1 Diagnostics main menu Set the TOSHIBA Test & Diagnostic CD to the ODD drive and turn the power of the system If you select Freedos on the BOOT selection screen then the test program is loaded and the following test selection screen is displayed.

  • Page 264

    1) FLLPPY DISK TEST The following message will appear Select the media mode and start track to be tested, then press Enter. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-147...

  • Page 265

    HDC status is described in section 3.20. Select 1 or 2. [1]: The detail status is not displayed. (Only pressing the [Enter] key is also considered valid.) [2]: The detail status is displayed. 3-148 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 266

    When you select any subtest item, you are taken to the test mode described in the detail of each test function in section 4-6. Pressing the [Esc] key or selecting [99] returns to the test selection screen described in section 3-31-4-2-2T Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-149...

  • Page 267

    At this time, the following operation guide is displayed on the right side of the screen. [NO]: When an error occurs, the error status is displayed. The error counter is incremented by 1 and you are taken to the next test step. 3-150 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 268

    3) Discontinuing a test If you press the [Ctrl] + [Alt] + [Break] keys during a test, the test is discontinued and the screen returns to the subtest menu described in section 3-31-4.2.3. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-151...

  • Page 269

    HUB - CLEAR FEATURE2 ERROR USB - OVER CURRENT ERROR USB - GET DESCR.ERROR(SECOND)' DISPLAY EE VRAM SIZE NOT SUPPORT FDD - BAD COMMAND ERROR FDD - ADDRESS MARK NOT FOUND FDD - WRITE PROTECTED 3-152 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 270

    HDD - ECC RECOVER ENABLE HDD - DRIVE NOT READY HDD - WRITE FAULT HDD - STATUS ERROR HDD - BAD SECTOR HDD - ACCESS TIME ERROR HDD - NO HDD HDD - DMA CRC ERROR Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-153...

  • Page 271

    8:C-Read : USB Flash Memory Log Read 9:C-Write : USB Flash Memory Log Writefs Note: Error logs can be saved to a FD or the USB flash memory with the name of *ERRORLOG.TXT.. 3-154 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 272

    The following table indicates the test items. Test Name Sub test No. Memory 01(Conventional Memory) ‐ 02(Protected Mode) ‐ ‐ 04(Stress Test) Display 01(VRAM read / write for VGA) Real Timer 02(Backup memory) 01(Sequential read) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-155...

  • Page 273

    If you press the [Esc] key or select [9], the screen returns to the main menu described in section 4.2.1. 1) DUMP This program displays the contents of the floppy disk and the designated sectors of the hard disk on the display. 3-156 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 274

    Write double words of the data to the initial address of the data in 64KB units and the initial address + 4, then read the written data byte by byte and compare the result with the original data. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-157...

  • Page 275

    2) Protected Mode This subtest writes constant data and address data (from 1MB to maximum MB), and reads the new data and compares the result with the original data. 3-158 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 276

    : Sequential Read and Compare Step 3: Sequential Write (Fixed pattern 2 MMX version FFFFAAAA55550000h) : Sequential Read and Compare Step 5: JMP + Write (Address pattern 1) 0, 1/2 increment 1/4, 3/4 decrement Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-159...

  • Page 277

    : JMP + Read and Compare Step 7: JMP+Write (Address pattern 2) 1/4. 3/4 increment 0, 1/2 decrement : JMP+Read and Compare Step11: Dword Transfer ( Data is an 32-bit shift data) : Step 11 bit-reversed pattern 3-160 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 278

    The 88 key (compatible with the 106 key) is not tested because this key operating in overseas mode uses the different character code table (Not for Japan model). Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-161...

  • Page 279

    5) All dot on / off for LCD This subtest displays an all-white screen then an all-black screen. The display changes automatically every three seconds, then returns to the DISPLAY TEST menu. 3-162 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 280

    3 mode) to test. It is because when FDD#1 becomes greater than FDD#2 in the 2FDD test, a correct data cannot be created because of insufficient test data amount. (the test data is created with the #1 sector size.) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-163...

  • Page 281

    IC1/IC0 : Interrupt Code bits 00=normal,01=abnormal,10=invalid CMD 11=abnormal(FDD ready) SE : Seek end EC : Equipment check (track 0 is detected) NR : Not ready HD : Head address US1/US0 : Unit select 3-164 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 282

    CM : Control mark DD : Data error (data field) NC : No cylinder SH : Scan equal hit SN : Scan not satisfied BC : Bad cylinder MD : Missing address mark (data field) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-165...

  • Page 283

    1 cylinder ‘ EB6DB6 ‘ 2 cylinder ‘ 149249 ‘ 3 cylinder ‘ 63B63B ‘ 4 cylinder ‘ 9C49C4 ‘ 5 cylinder ‘ 2DB6DB ‘ 6 cylinder ‘ D24924 ‘ 7 cylinder 3-166 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 284

    An error occurs during the HDD test, the following message is displayed. Note: For the serial ATA, this message is not displayed correctly. HDC status = X X X X HDC error register (P – 1f7h) HDC status register (P – 1f1h) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-167...

  • Page 285

    0: No data transfer request DRQ(data request) 1: Data transfer being requested. 0: Not used 1: Data error occurrence (corrected data) 0: Not used IDX(index) 1: Index detection 0: Normal termination ERR(error) 1: End with error 3-168 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 286

    1: No ID field (identification) - - - 0: Not used ABT(about) 1: Illegal command or command abort 0: Track 0 detection TK0(track zero) 1: Track 0 not detection (When recalibrated) 0 - - - Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-169...

  • Page 287

    3) Real time carry Set the constant value as below and check carry of the timer. Month Date Year Hour Min. Sec. 12 - 31 - 2008 23 : 59 : 58 3-170 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 288: Maintenance (winpe&freedos) Test Program Supplementary Information

    Name of the second CPU mounted in PC CPU Clock1 Current Clock of CPU, Max Clock CPU Socket1 Name of CPU socket CPU Description1 Name of CPU processor, CPUID(Family, Model, Stepping) L2 Cache1 Second cache of CPU Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-171...

  • Page 289

    Multitask is displayed. When performed in Sequential, Sequential is displayed. CPU Stress If CPU stress is applied, Yes is displayed. If not applied, No is displayed. Limit pass count The number of passes of a test specified. 3-172 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 290

    * The current version does not support it. Over-all Displays the results of all of the tests. judgment ●indicates that the test is OK. ▲indicates that there is any problem in the test. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-173...

  • Page 291

    Do not remove the CD containing this T&D test program or the USB memory during the test. This CD or this USB memory include an operational program for the test, if it is removed, the test cannot be continued and ends in an error. 3-174 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 292

    If the USB FDD drive or the floppy disk on the disk drive is removed during an FDD test, a time-out error occurs and then the program hangs up. Do not remove the FDD drive or the floppy disk during the FDD test. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] 3-175...

  • Page 293

    Chapter 4 Replacement Procedures [CONFIDENTIAL]...

  • Page 294

    エラー スタイルが定義されていません。 Replacement Procedures 4-ii [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 295

    エラー スタイルが定義されていません。 Replacement Procedures Chapter 4 Contents Overview........................4-1 Battery pack ......................4-11 B-CAS card......................4-13 Bridge media......................4-14 Memory module....................... 4-15 HDD......................... 4-17 Keyboard........................4-19 Cover assembly......................4-22 Optical disk drive (DVD-super multi drive/Blue-Ray ROM/Blue-Ray Rewritable) ......4-26 4.10 SW board .........................

  • Page 296

    エラー スタイルが定義されていません。 Replacement Procedures 4.30 LCD unit ........................4-83 4.31 Camera module ......................4-89 4.32 Wireless LAN antenna/Camera harness ..............4-91 Figures Figure 4-1 Removing the battery pack (1)............... 4-10 Figure 4-2 Removing the battery pack (2)............... 4-11 Figure 4-3 Removing the ExpressCard................

  • Page 297

    エラー スタイルが定義されていません。 Replacement Procedures Figure 4-27 Removing the touch pad/Fingerprint sensor board/LED board (2) ....4-43 Figure 4-28 Removing the Fingerprint sensor board............4-44 Figure 4-29 Removing the LED board ................4-45 Figure 4-30 Removing the touch pad................. 4-46 Figure 4-31 Removing the base assembly (1)..............4-48 Figure 4-32 Removing the base assembly (2)..............

  • Page 298

    エラー スタイルが定義されていません。 Replacement Procedures Figure 4-59 Removing the USB/jack board (2)..............4-90 Figure 4-60 Removing the hinge (right) ................4-91 Figure 4-61 Removing the hinge (left) ................4-92 Figure 4-62 Removing the modem jack/FM jack/DC-IN jack/right LED......4-94 Figure 4-63 Removing the F-jack ..................4-96 Figure 4-64 Removing the battery lock/battery latch (1)...........

  • Page 299

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Overview This chapter describes the procedure for removing and replacing the field replaceable units (FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace one. The chart below provides a guide as to which other FRUs must be removed before a particular FRU can be removed.

  • Page 300

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures  Chart Notation The chart shows the case for the following example:  Removing a Optical disk drive All FRUs down to the “4.2 Battery pack” to “4.8 Cover assembly” must be removed. [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 301

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Please prepare required parts in advance, when replacing the following item. Parts List ITEM PART NAME Quantity ITEM No COVER ASSY COVER ASSY TOUCH SENSOR TOUCH PAD Parts List ITEM PART NAME Quantity ITEM No...

  • Page 302

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures The main parts in this manual are indicated in the part list by the following names. Parts List Manual NAME PART NAME ITEM No System board PCB ASSY FG6INx Switch board PCB ASSY FG6SWx USB board PCB ASSY FG6USx Serial board...

  • Page 303

    DANGER: 1. In the case of the battery, always use authentic parts or equivalent parts approved by Toshiba. Other batteries may have different specifications that are incompatible with the computer and may result in fire or explosion.

  • Page 304

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Before You Begin Take note of the following points before starting work. Always remove the AC adapter and battery pack before commencing any of the procedures. The procedure for removing the battery pack is described in section “4.2 Battery Pack”. 1.

  • Page 305

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Disassembly Procedure Four main types of cable connector are used.  Pressure plate connector  Spring connector  Back flip connector  Normal pin connector For pressure plate connectors, slide the pressure plate holding tags on both sides of the plastic pressure plate on the connector and pull the cable out from the connector.

  • Page 306

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Assembly Procedure After the computer has been disassembled and the part that caused the fault has been repaired or replaced, the computer must be reassembled. Take note of the following general points when assembling the computer. ...

  • Page 307

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Screw Tightening Torque Use the following torque when tightening screws. CAUTION: Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall out) causing a short circuit or other damage.

  • Page 308

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Grip Color Some screws have a colored grip area to help you determine the length of the screw. [Normal grip]  Even numbered length screws: Brown  Odd numbered length screws: White Grip area ...

  • Page 309

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Screw Notation To make maintenance of the computer easier, markings of the kinds of the screws including the types and lengths of the screws are indicated on the computer body. Format: Screw type + Screw length (mm) Screw shape...

  • Page 310: Battery Pack

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Battery pack Removing the battery pack To remove the battery pack, follow the steps below and refer to Figure 4-1. CAUTION: Take care not to short-circuit the terminals when removing the battery pack. Similarly, do not drop, knock, scratch, disassemble, twist, or bend the battery pack.

  • Page 311

    Dispose always the used battery pack in accordance with the laws and ordinances of your local authority. Use only the batteries approved by Toshiba. NOTE: Check visually the battery terminals and clean off any dirt with a dry cloth.

  • Page 312

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures B-CAS card Removing the B-CAS card To remove the B-CAS card, follow the steps below and refer to Figure 4-2. 1. Slide the latch in the direction of the arrow in the figure below and remove the B- CAS card from the card slot.

  • Page 313: Bridge Media

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Bridge media Removing the Bridge media To remove the Bridge media, follow the steps below and refer to Figure 4-3. CAUTION: Insert or remove a Bridge media in accordance with any instructions in the each Bridge Media manual or the manuals of the computer system you are using.

  • Page 314: Memory Module

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Memory module CAUTION: The power of the computer must be turned off when you remove the memory module. Removing the memory module with the power on damages the module or the computer itself. Do not touch memory module terminals. Any dirt on the terminals may cause memory access problems.

  • Page 315

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 3. Open the left and right latches outside and remove the memory module(s). Latch Memory module A Memory module B Latch Figure 4-5 Removing the memory module Installing the memory module To install the memory module, confirm that the computer is shut down.

  • Page 316

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Removing the HDD To remove the HDD, follow the steps below and refer to Figure 4-6 and 4-7. CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device.

  • Page 317

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 3. Remove the HDD from the slot and disconnect it from the connector on the HDD harness. HDD harness Figure 4-7 Removing the HDD Installing the HDD To install the HDD, follow the steps below and refer to Figure 4-6 and 4-7. 1.

  • Page 318

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Keyboard Removing the keyboard To remove the keyboard, follow the steps below and refer to Figure 4-8 to 4-10. CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the frame and do not touch the keytop.

  • Page 319

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 3. Remove the following screws and KB hold plate securing the keyboard.  M2.53C 3 S-THIN HEAD screw 4. Lift the upper side of the keyboard while releasing the latch and turn the keyboard face down on the palm rest.

  • Page 320

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 5. Disconnect the keyboard cable from the connector CN3230 on the system board and remove the keyboard. Keyboard cable CN3230 Keyboard Figure 4-10 Removing the keyboard (2) Installing the keyboard To install the keyboard, follow the steps below and refer to Figure 4-8 to 4-10. 1.

  • Page 321

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Cover assembly Removing the Cover assembly To remove the cover assembly, follow the steps below and refer to Figure 4-11 to 4-13. 1. Close the display and turn over the computer. 2.

  • Page 322

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Speaker harness TV tuner antenna cable CN6150 Figure 4-11 Removing the cover assembly (1) 4-24 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 323

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4. Turn over the computer and open the display. 5. Disconnect the touch sensor FFC, SW board FFC, TB board FFC, LED board FFC and TP board harness from the connectors CN9650, CN3390, CN9570, CN3240, CN3242 and CN3241 on the system board.

  • Page 324

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 7. Remove the cover assembly from the base assembly while releasing the latches. Cover assembly Base assembly Figure 4-13 Removing the cover assembly (3) 4-26 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 325

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the cover assembly To install the cover assembly, follow the steps below and refer to Figure 4-11 to 4-13. 1. Set the cover assembly to the base assembly while engaging the latches. NOTE: When replacing the cover assembly with a new one, stick the CU LAMI PALM INSULATOR to the cover assembly in place (In the case of External VGA model and SPURS model).

  • Page 326

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures  M2.516B FLAT HEAD screw 3 (Described as “16” in the Figure 4-11) 4-28 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 327

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Optical disk drive (DVD-super multi drive/Blue-Ray ROM/Blue-Ray Rewritable) Removing the Optical disk drive To remove the optical disk drive, follow the steps below and refer to Figure 4-14 and 4-15. 1.

  • Page 328

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 3. Remove the following screws and ODD rear bracket.  M2.02.7C 2 Unique screw 4. Remove the following screw and ODD side bracket.  M2.03C 1 S-THIN HEAD screw ODD side bracket ODD rear bracket M2.0x3C S-THIN HEAD M2.0x2.7C Unique Figure 4-15 Removing the optical disk drive (2)

  • Page 329

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the optical disk drive To install the Optical disk drive, follow the steps below and refer to Figure 4-14 to 4-16. 1. When installing a new optical disk drive, set the ODD bezel to the optical disk drive while securing the latches.

  • Page 330

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 4.10 SW board Removing the SW board To remove the SW board, follow the steps below and refer to Figure 4-17. 1. Remove the following screw and SW board.  M2.54B 1 FLAT HEAD screw 2.

  • Page 331

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the SW board To install the SW board, follow the steps below and refer to Figure 4-17. 1. Connect the SW board FFC to the connector on the SW board. 2.

  • Page 332

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 4.11 Touch sensor Removing the Touch sensor To remove the touch sensor, follow the steps below and refer to Figure 4-18. 1. Turn up the insulator and peel off the touch sensor. 2. Disconnect the touch sensor FFC from the connector on the touch sensor. Touch sensor Touch sensor FFC Guide...

  • Page 333

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.12 LED board Removing the LED board To remove the LED board, follow the steps below and refer to Figure 4-19. 1. Remove the LED board from the guide of the cover assembly. 2.

  • Page 334

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Installing the LED board To install the LED board, follow the steps below and refer to Figure 4-19. 1. Connect the LED board FFC to the connector on the LED board. 2. Set the SW board to the guides of the cover assembly. 3.

  • Page 335

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.13 TP board Removing the TP board To remove the SW board, follow the steps below and refer to Figure 4-20. 1. Remove the following screw and TP board.  M2.04B 1 S-THIN HEAD screw 2.

  • Page 336

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Installing the TP board To install the TP board, follow the steps below and refer to Figure 4-20. 1. Connect the TP board harness to the connector on the TP board. 2. Set the TP board to the guide and secure it with the following screw. ...

  • Page 337

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.14 Touch pad/TB board Removing the Touch pad/TB board To remove the touch pad/TB board, follow the steps below and refer to Figure 4-21 to 4-23. 1. Turn up the insulator and disconnect the TB board FFC from the connector CN3340 on the TB board.

  • Page 338

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 4. Remove the touch pad plate and TB board from the slot. Touch pad plate TB board Figure 4-22 Removing the touch pad/TB board (2) 4-40 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 339

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 5. Peel off the touch pad. Touch pad Figure 4-23 Removing the touch pad NOTE: Do not reuse the removed touch pad. Be sure to use a new touch pad. Please prepare required parts in advance, when replacing the following item.

  • Page 340

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Installing the touch pad/TB board To install the touch pad/TB board, follow the steps below and refer to Figure 4-21 to 4-23. 1. Stick a new touch pad to the slot of the cover assembly in place. 2.

  • Page 341: Rtc Battery

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.15 RTC battery CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the laws and ordinances of your local authority. Removing the RTC battery To remove the RTC battery, follow the steps below and refer to Figure 4-24. 1.

  • Page 342

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the RTC battery To install the RTC battery, follow the steps below and refer to Figure 4-24. 1. Stick the RTC battery insulator on the system board in place and set the RTC battery on the RTC battery insulator.

  • Page 343: Bluetooth Module

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.16 Bluetooth module Removing the Bluetooth module To remove the Bluetooth module, follow the steps below and refer to Figure 4-25. 1. Peel off the acetate tape and disconnect the Bluetooth harness from the connector CN4440 on the system board.

  • Page 344

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the Bluetooth module To install the Bluetooth module, follow the steps below and refer to Figure 4-25 1. Set the Bluetooth module to the guide of the Bluetooth holder. 2.

  • Page 345: Wireless Lan Card

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.17 Wireless LAN card Removing the wireless LAN card To remove the wireless LAN card, follow the steps below and refer to Figure 4-26. 1. Disconnect the wireless LAN antenna cables from the connectors on the wireless LAN card.

  • Page 346

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the wireless LAN card To install the wireless LAN card, follow the steps below and refer to Figure 4-26. 1. Insert the wireless LAN card into the connector CN2600 on the system board slantwise.

  • Page 347: Microphone Harness

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.18 Microphone harness Removing the Microphone harness To remove the microphone harness, follow the steps below and refer to Figure 4-27. 1. Disconnect the microphone harness from the connector CN6070 on the JK board. 2.

  • Page 348

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.19 LCD assembly/Base assembly Removing the LCD assembly/Base assembly To remove the LCD assembly/base assembly, follow the steps below and refer to Figure 4-28 and 4-29. 1. Peel off the acetate tapes and insulator (WLAN LOW INSIALATOR) and release the wireless LAN antenna cables from the guides.

  • Page 349

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 5. Release the speakers from the slots and separate the LCD assembly and base assembly. LCD assembly Speaker Base assembly Figure 4-29 Removing the LCD assembly/base assembly (2) 4-48 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 350

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the LCD assembly/Base assembly To install the LCD assembly/base assembly, follow the steps below and refer to Figure 4-28 and 4-29. 1. Place the LCD assembly to the base assembly and set the speakers into the slots. NOTE: Stick the insulator (KENSINGTON INSULATOR) as shown in the figure below.

  • Page 351

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4. Pass the wireless LAN antenna cables through the insulator (WLAN LOW INSIALATOR). 5. Arrange the wireless LAN antenna cables and camera harness in place. 6. Stick the acetate tapes in place. NOTE: Pass the wireless LAN antenna cable through the insulator (WLAN LOW INSULATOR) as shown in the figure below.

  • Page 352

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.20 Hinge cover Removing the Hinge cover To remove the hinge cover, follow the steps below and refer to Figure 4-30. 1. Remove the following screws securing the hinge cover. ...

  • Page 353

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the Hinge cover To install the hinge cover, follow the steps below and refer to Figure 4-30. 1. Set the hinge cover to the base assembly while engaging the latches. NOTE: When setting the hinge cover, be careful not to pinch the harnesses. 2.

  • Page 354

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.21 Brake hinge LOW R Removing the Brake hinge LOW R To remove the brake hinge LOW R, follow the steps below and refer to Figure 4-31. 1. Remove the following screw securing the brake hinge LOW R. ...

  • Page 355

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.22 RGB harness Removing the RGB harness To remove the RGB harness, follow the steps below and refer to Figure 4-32 and 4-33. 1. Disconnect the RGB harness from the connector CN9510 on the system board. 2.

  • Page 356

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4. Separate the RGB harness and brake hinge LOW L. RGB harness Brake hinge LOW L Guide Guide Figure 4-33 Removing the RGB harness (2) QOSMIO F60 Maintenance Manual (960-796) [CONFIDENTIAL] 4-55...

  • Page 357

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the RGB harness To install the RGB harness, follow the steps below and refer to Figure 4-32 and 4-33. 1. Set the RGB harness into the guides of the brake hinge LOW L. 2.

  • Page 358

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.23 JK board Removing the JK board To remove the JK board, follow the steps below and refer to Figure 4-34. 1. Disconnect the JK board FFC from the connector CN4631 on the system board and CN6491 on the JK board.

  • Page 359

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the JK board To install the JK board, follow the steps below and refer to Figure 4-34. 1. Connect the JK board FFC to the connector CN6491 on the JK board. 2. Set the JK board into the guides of the base assembly. 3.

  • Page 360

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.24 HDD harness Removing the HDD harness To remove the HDD harness, follow the steps below and refer to Figure 4-35. 1. Disconnect the HDD harness from the connector CN1900 on the system board. 2.

  • Page 361

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the HDD harness To install the HDD harness, follow the steps below and refer to Figure 4-35. 1. Connect the HDD harness to the connector CN1900 on the system board. 2. Arrange the HDD harness while passing the connector connected to the HDD to the back of the base assembly.

  • Page 362

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.25 System board/RJ45 harness/DC-IN harness/ USB harness/Speaker CAUTION: 1. If replacing with a new system board, execute the subtest01 Initial configuration in section 3.4 “Setting of the hardware configuration”. Also update with the latest BIOS and EC/KBC as described in Appendix G and in Appendix H.

  • Page 363

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures Removing the System board/RJ45 harness/DC-IN harness/USB harness/ Speaker To remove the system board/RJ45 harness/DC-IN harness/USB harness/speaker, follow the steps below and refer to Figure 4-36 to 4-41. 1. Release the latches and remove the harness holder. Harness holder Latch Figure 4-36 Removing the system board (1)

  • Page 364

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 2. Take out the DC-IN harness and RJ45 harness from the slot. 3. Remove the following screw and F-jack from the slot of the base assembly.  M2.04B 1 BIND screw 4.

  • Page 365

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 5. Disconnect the RJ45 harness from the connector CN4050 on the system board. RJ45 harness CN4050 Figure 4-38 Removing the system board (3) 4-64 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 366

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 6. Peel off the insulators (SQUARE INSULATOR) and release the speaker harnesses from the guides. Insulator SQUARE INSULAOTR Guide Speaker harness Figure 4-39 Removing the system board (4) QOSMIO F60 Maintenance Manual (960-796) [CONFIDENTIAL] 4-65...

  • Page 367

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 7. Remove the system board from the base assembly. (Be careful that the DC-IN harness and USB harness are still connected to the system board.) 8. Peel off the acetate tape and insulators and remove the speakers. DC-IN harness Speaker Speaker...

  • Page 368

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures NOTE: Peel off the acetate tape and insulators as shown in the figure below. Insulator Acetate tape QOSMIO F60 Maintenance Manual (960-796) [CONFIDENTIAL] 4-67...

  • Page 369

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 9. Disconnect the USB harness and DC-IN harness from the connector CN4613 and CN8800 on the system board. USB harness DC-IN harness CN4613 CN8800 Figure 4-41 Removing the system board (6) 4-68 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 370

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the System board/RJ45 harness/DC-IN harness/USB harness/ Speaker To install the system board/RJ45 harness/DC-IN harness/USB harness/speaker, follow the steps below and refer to Figure 4-36 to 4-41. 1. Connect the USB harness and DC-IN harness to the connector CN4613 and CN8800 on the system board.

  • Page 371

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.26 F jack Removing the F jack To remove the F jack, follow the steps below and refer to Figure 4-42. 1. Peel off the acetate tape and insulator and release the TV tuner antenna cable. 2.

  • Page 372

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the F jack To install the F jack, follow the steps below and refer to Figure 4-42. 1. Connect the TV tuner antenna cable to the connector on the F jack. 2.

  • Page 373

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.27 IR lens Removing the IR lens To remove the IR lens, follow the steps below and refer to Figure 4-43. 1. Remove the IR lens form the base assembly. IR lens Figure 4-43 Removing the IR lens Installing the IR lens To install the IR lens, follow the steps below and refer to Figure 4-43.

  • Page 374

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.28 TV tuner Removing the TV tuner CAUTION: When replacing the TV tuner with a new one, refer to the chapter 3”TV tuner maintenance” and create the key information from the system board to the TV tuner.

  • Page 375

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the TV tuner To install the TV tuner, follow the steps below and refer to Figure 4-44. 1. Insert the TV tuner into the connector CN2610 on the system board slantwise. 2. Push down the TV tuner and secure it with the following screws. ...

  • Page 376

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.29 Heat sink/SPURS heat sink/CPU Removing the Heat sink/SPURS heat sink/CPU To remove the heat sink/SPURS heat sink/CPU, follow the steps below and refer to Figure 4- 45 to 4-48. 1.

  • Page 377

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures (External VGA model) 3. Remove the following screws and heat sink.  M2.04B 4 BIND screw  M2.03C 4 BIND screw M2.0x4B BIND M2.0x4B BIND M2.0x3C BIND M2.0x3C BIND CN8771 Heat sink Fan harness Figure 4-46 Removing the heat sink (2) (external VGA model) 4-76 [CONFIDENTIAL]...

  • Page 378

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures (SPURS model) 4. Remove the following screws and heat sink.  M2.04B 4 BIND screw 5. Remove the following screws and SPURS heat sink.  M2.03C 3 BIND screw M2.0x4B BIND M2.0x4B BIND M2.0x3C BIND M2.0x3C BIND...

  • Page 379

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 6. Unlock the CPU by rotating the cam on the CPU socket 180 degrees counterclockwise with a flat-blade screwdriver. 7. Remove the CPU. Figure 4-48 Removing the CPU 4-78 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 380

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the Heat sink/SPURS heat sink/CPU To install the heat sink/SPURS heat sink/CPU, follow the steps below and refer to Figure 4- 45 to 4-50. 1. Check that the mark of the cam is in the unlock position. 2.

  • Page 381

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4. When silicon grease is already applied to the CPU, wipe them off with a cloth in advance. Apply new grease (Shin-Etsu Chemical Co. X-23-7921-5) on the CPU using a special syringe as shown in the following figure. Figure 4-50 Applying new grease 5.

  • Page 382

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 6. Set the heat sink and it with the following screws.  M2.04B 4 BIND screw NOTE: When replacing the heat sink with a new one (all models), stick the acetate tape as shown in the figure below.

  • Page 383

    エラー スタイルが定義されていません。 エラー ス Replacement Procedures (External VGA model) 7. Set the heat sink and it with the following screws.  M2.04B 4 BIND screw  M2.03C 4 BIND screw (SPURS model) 8. Set the SPURS heat sink and secure it with the following screws. ...

  • Page 384

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.30 LCD unit Removing the LCD unit To remove the LCD unit, follow the steps below and refer to Figure 4-51 to 4-54. 1. Peel off four LCD cushions and remove the following screws. ...

  • Page 385

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 3. Remove the following screws securing the LCD unit.  M2.55B 8 FLAT HEAD screw 4. Turn up the insulators and release the LCD harnesses. 5. Remove the LCD unit from the LCD cover. Insulator Insulator M2.5x5B FLAT HEAD...

  • Page 386

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 6. Peel off the tape and disconnect the LCD harness from the connector on the back of the LCD unit. LCD harness Tape Connector Figure 4-53 Removing the LCD harness QOSMIO F60 Maintenance Manual (960-796) [CONFIDENTIAL] 4-85...

  • Page 387

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 7. Remove the following screws and brake hinges (left and right) from the LCD unit.  M2.03C 8 S-THIN HEAD screw M2.0x3C S-THIN HEAD LCD unit Brake hinge R Brake hinge L M2.0x3C S-THIN HEAD Figure 4-54 Removing the brake hinge (left and right) 4-86 [CONFIDENTIAL]...

  • Page 388

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the LCD unit To install the LCD unit, follow the steps below and refer to Figure 4-51 to 4-54. 1. Set the brake hinges (left and right) to the LCD unit and secure them with the following screws.

  • Page 389

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures 5. Set the LCD mask while engaging the latches and secure it with the following screws.  4 M2.55B FLAT HEAD screw CAUTION: Make sure that the harnesses are not pinched. 6. Stick four LCD cushions in place. NOTE: When replacing the LCD mask with a new one, stick the camera panel in place.

  • Page 390

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.31 Camera module Removing the Camera module To remove the camera module, follow the steps below and refer to Figure 4-55. 1. Disconnect the camera harness from the connector on the camera module and peel off the camera module.

  • Page 391

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Installing the Camera module To install the camera module, follow the steps below and refer to Figure 4-55. 1. Set the cushion to a new camera module. 2. Peel off the protection sheet. NOTE: When peeling off the protection sheet, with care of the followings: 3.

  • Page 392

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures 4.32 Wireless LAN antenna/Camera harness Removing the Wireless LAN antenna/Camera harness To remove the wireless LAN antenna/camera harness, follow the steps below and refer to Figure 4-56. 1. Turn up the insulators and remove the camera harness. 2.

  • Page 393

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures ASSY CAMERA MODULE 2.4/5.2GHZ ANTENNA 4-92 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 394

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Installing the Wireless LAN antenna/Camera harness To install the wireless LAN antenna/camera harness, follow the steps below and refer to Figure 4-56. 1. Stick new wireless LAN antennas on the LCD cover in place. 2.

  • Page 395

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures CAUTION: Replacing the Wireless LAN antennas with care of the followings: Wireless LAN antenna (black) Wireless LAN antenna (white) Insulator 4-94 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 396

    エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー スタイルが定義されていません。 エラー ス Replacement Procedures Insulator QOSMIO F60 Maintenance Manual (960-796) [CONFIDENTIAL] 4-95...

  • Page 397

    エラー スタイルが定義されていません。 エラー スタイルが定義されてい Replacement Procedures Insulator 4-96 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)

  • Page 398

    Appendices [CONFIDENTIAL]...

  • Page 399

    Appendices App-ii [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 400: Appendix A Handling The Lcd Module

    CN6150 Speaker interface connector (4-pin) .............C-14 C.15 CN8771 FAN interface connector (4-pin) ............C-14 C.16 CN8800 DC-IN connector (4-pin) ..............C-14 C.17 CN8810 Battery connector (10-pin) ..............C-14 C.18 CN9550 WebCam interface connector (6-pin) ...........C-15 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] App-iii...

  • Page 401: Appendix D Keyboard Scan/character Codes

    Power SW board (FLEPW*) C.40 CN3410 System interface connector (14-pin) ............C-25 C.41 CN3411 2nd Display interface connector (10-pin)..........C-25 Appendix D Keyboard Scan/Character Codes ..............D-1 Appendix E Key Layout.....................E-1 United Kingdom (UK) Keyboard ................E-1 App-iv [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 402: Appendix F Wiring Diagrams

    Appendix F Wiring Diagrams ................... F-1 RGB Monitor Loopback Connector ................ F-1 LAN Loopback Connector..................F-1 Appendix G BIOS rewrite Procedures ................G-1 Appendix H EC/KBC rewrite Procedures............... H-1 Appendix I Reliability ......................I-1 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] App-v...

  • Page 403

    Table C- 7 PCI-E Mini(TV) CARD interface connector (52-pin) ........C-10 Table C- 8 Keyboard interface connector (34-pin)............. C-11 Table C- 9 LAN interface connector (8-pin) ..............C-11 Table C- 10 USB interface connector (4-pin)..............C-12 App-vi [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 404

    Table C- 36 System interface connector (6-pin)..............C-23 Table C- 37 Touch DEVICE interface connector (12-pin)..........C-23 Table C- 38 System interface connector (2-pin)..............C-23 LED board (FLELE*) Table C- 39 System interface connector (10-pin)...............C-24 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] App-vii...

  • Page 405

    Appendices Table C- 40 System interface connector (14-pin)...............C-25 Table C- 41 2nd Display interface connector (10-pin)............C-25 App-viii [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 406

    Table D-4 Scan codes with Fn key..................D-6 Table D-5 Scan codes in overlay mode ................D-7 Table D-6 No.124 key scan code..................D-7 Table D-7 No.126 key scan code..................D-8 Table I-1 MTBF ........................ I-1 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] App-ix...

  • Page 407

    LCD cover before securing the module with screws. Do not force the module into place, because stress can affect its performance. Also, the panel’s polarized surface is easily scarred, so be careful when handling it. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 408

    4. If water or other liquid is left on the panel’s surface for a long period, it can change the screen’s tint or stain it. Be sure to quickly wipe off any liquid. [CONFIDENTIAL ] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 409

    6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 410

    8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. [CONFIDENTIAL ] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 411

    10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 412

    Appendices Appendix A Handling the LCD Module [CONFIDENTIAL ] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 413: Appendix B Board Layout

    Appendix B Board Layout Appendices Appendix B Board Layout B.1 System board (FLESY*) Front View Figure B-1 System board (FLESY*) layout (front) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 414

    FELICA interface connector (6-pin) :Japanese model Only CN3390 FLEPW*(Power SW board) interface connector CN4631 FLEJK*(USB/Sound board) interface connector CN3240 F LETB*(Touch Pad SW board) interface connector CN3241 FLETP*(Touch Pad En-SW board) interface connector CN3242 FLELE*(LED board) interface connector [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 415

    Appendix B Board Layout Appendices B.2 System board (FLESY*) Back View Figure B-2 System board (FLESY*) layout (back) Qosmio F60 Serie Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 416

    Speaker interface connector CN8771 FAN interface connector IS2100 MEDIA BRIDGE I/F connector CN5350 HDMI interface connector CN8800 DC-IN interface connector CN8810 Battery connector IS1050 IC1600 Ibex Peak-M (chip set) IC500 GPU (10GC only) [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 417

    Appendix B Board Layout Appendices B.3 USB/Sound board (FLEJK*) View (front) (back) Figure B-3 USB/Sound board (FLEJK*) layout (front/back) Table B- 3 USB/Sound board (FLEJK*) (FG5SN*) connector Number Name CN4640 USB interface connector J6071 Microphone connector J6310 Headphone connector CN6070 Int-Mic interface connector CN6491 System board interface connector...

  • Page 418

    B.4 Touch Pad SW board (FLETB*) View (front) (back) Figure B-4 Touch Pad SW board (FLETB*) layout (front/back) Table B-4 Touch Pad SW board (FLETB*) connector (back) Number Name CN3340 Touch DEVICE interface connector CN9530 System board interface connector [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 419

    Appendix B Board Layout Appendices B.5 Touch Pad En-SW board (FLETP*)View (front) (back) Figure B-5 Touch Pad En-SW board (FLETP*) layout (front/back) Table B-5 Touch Pad En-SW board (FLETP*) connector (back) Number Name CN3331 System board interface connector Qosmio F60 Serie Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 420

    Appendices Appendix B Board Layout B.6 LED board (FLELE*) View (front) (back) Figure B-6 LED board (FLELE*) layout (front/back) Table B-6 LED board (FLELE*) connector (back) Number Name CN9540 System board interface connector [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 421

    Appendix B Board Layout Appendices B.7 Power SW board (FLEPW*) View (front) (back) Figure B-7 Power SW board (FLEPW*)layout (front/back) Table B-7 Power SW board (FLEPW*) connector (back) Number Name CN3411 2nd Display interface connector CN3410 System interface connector ( Qosmio F60 Serie Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 422

    Appendices Appendix B Board Layout B-10 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 423: Appendix C Pin Assignments

    ADM0-B1P ADQS0-B1P ADQ07-B1P ADQ02-B1P ADQ06-B1P ADQ03-B1P ADQ09-B1P ADQ12-B1P ADQ08-B1P ADQ13-B1P ADQS1-B1N ADM1-B1P ADQS1-B1P ASMRST-B1 ADQ10-B1P ADQ14-B1P ADQ15-B1P ADQ11-B1P ADQ20-B1P ADQ21-B1P ADQ16-B1P ADQ17-B1P ADQS2-B1N ADM2-B1P ADQS2-B1P ADQ22-B1P ADQ18-B1P ADQ23-B1P ADQ19-B1P ADQ29-B1P ADQ24-B1P ADQ28-B1P ADQ25-B1P Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 424

    Appendices Appendix C Pin Assignments Table C-1 Memory A connector (200-pin) (2/3) Pin No. Signal Name Pin No. Signal Name ADQS3-B1N ADM3-B1P ADQS3-B1P ADQ26-B1P ADQ30-B1P ADQ31-B1P ADQ27-B1P ACKE0-B1P ACKE1-B1P 1R5-B1V 1R5-B1V AMA15-B1P ABS2-B1P AMA14-B1P 1R5-B1V 1R5-B1V AMA12-B1P AMA11-B1P AMA09-B1P AMA07-B1P 1R5-B1V 1R5-B1V AMA08-B1P...

  • Page 425

    ADM5-B1P ADQS5-B1P ADQ47-B1P ADQ46-B1P ADQ42-B1P ADQ43-B1P ADQ53-B1P ADQ52-B1P ADQ49-B1P ADQ48-B1P ADQS6-B1N ADM6-B1P ADQS6-B1P ADQ50-B1P ADQ54-B1P ADQ51-B1P ADQ55-B1P ADQ56-B1P ADQ60-B1P ADQ61-B1P ADQ57-B1P ADQS7-B1N ADM7-B1P ADQS7-B1P ADQ62-B1P ADQ58-B1P ADQ59-B1P ADQ63-B1P TSDIM-P3N SMBDT1-P3P SMBCK1-P3P 0R75-P0V 0R75-P0V Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 426

    Appendices Appendix C Pin Assignments CN1410 Memory B connector (200-pin) Table C- 2 Memory B connector (200-pin) (1/3) Pin No. Signal Name Pin No. Signal Name MRVREF-B0V BDQ04-B1P BDQ01-B1P BDQ05-B1P BDQ00-B1P BDQS0-B1N BDM0-B1P BDQS0-B1P BDQ02-B1P BDQ07-B1P BDQ03-B1P BDQ06-B1P BDQ08-B1P BDQ13-B1P BDQ09-B1P BDQ12-B1P BDQS1-B1N...

  • Page 427

    BMA01-B1P BMA00-B1P 1R5-B1V 1R5-B1V XBCK0-B1P XBCK1-B1P XBCK0-B1N XBCK1-B1N 1R5-B1V 1R5-B1V BMA10-B1P BBS1-B1P BBS0-B1P BRAS-B1N 1R5-B1V 1R5-B1V BWE-B1N BCS0-B1N BCAS-B1N BODT0-B1P 1R5-B1V 1R5-B1V BMA13-B1P BODT1-B1P BCS1-B1N 1R5-B1V 1R5-B1V NC(TEST) MRVREF-B0V BDQ33-B1P BDQ36-B1P BDQ32-B1P BDQ37-B1P Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 428

    Appendices Appendix C Pin Assignments Table C-2 Memory B connector (200-pin) (3/3) Pin No. Signal Name Pin No. Signal Name BDQS4-B1N BDM4-B1P BDQS4-B1P BDQ39-B1P BDQ34-B1P BDQ38-B1P BDQ35-B1P BDQ41-B1P BDQ40-B1P BDQ44-B1P BDQ45-B1P BDQS5-B1N BDM5-B1P BDQS5-B1P BDQ46-B1P BDQ43-B1P BDQ47-B1P BDQ42-B1P BDQ49-B1P BDQ53-B1P BDQ48-B1P BDQ52-B1P BDQS6-B1N...

  • Page 429

    ZSATR0-P1P ZSATR0-P1N ZSATT0-P1N ZSATT0-P1P CN1950 SATA ODD interface connector (13-pin) Table C- 4 SATA ODD interface connector (23-pin) Signal Name Pin No. Signal Name Pin No. ZSATT1-P1P ZSATT1-P1N ZSATR1-P1N ZSATR1-P1P ODD-P5V NC(S3V) ODD-P5V Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 430

    Appendices Appendix C Pin Assignments CN1930 eSATA/USB interface connector (11-pin) Table C- 5 eSATA/USB interface connector (20-pin) Pin No. Signal Name Pin No. Signal Name USB0PS-E5V ZUSBP4C-E3N ZUSBP4C-E3P ZSTTES-P1P ZSTTES-P1N ZSTRES-P1N ZSTRES-P1P [CONFIDENTIAL] Qosmio F60 Serise Maintenance Manual (960-796)

  • Page 431

    Table C- 6 PCI-E Mini CARD interface connector (52-pin) Pin No. Signal Name Pin No. Signal Name PEWAKE-E3N WLAN-E3V WCHDAT-P3P WCHCLK-P3P 1R5-P1V WLXRQ-E3N XPEWL-P0N XPEWL-P0P WLRFON-S3N PLTRS2-E3N ZERMN1-P1N WLAN-E3V ZERMN1-P1P MN1PRS-P3N 1R5-P1V ZETMN1-P1N ZETMN1-P1P ZUSBP0-E3N ZUSBP0-E3P WLAN-E3V WLAN-E3V WMLED-E3P 1R5-P1V WLAN-E3V Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 432

    Appendices Appendix C Pin Assignments C.7 CN2610 PCI-E Mini(TV) CARD interface connector (52-pin) Table C- 7 PCI-E Mini(TV) CARD interface connector (52-pin) Pin No. Signal Name Pin No. Signal Name XBCCLK-P3P BCCDET-P3N 1R5-P1V UIMPWR-E3V UIMDAT-E3P UIMCLK-E3P UIMRST-E3P BCIO-P5P BCRST-P3N IVDET-P3P BCPWON-P3P 3GRFON-S3N PLTRS0-E3N...

  • Page 433

    KBSC14-S3N KBSC17-S3N KBSC16-S3N C.9 CN4050 LAN interface connector (8-pin) Table C- 9 LAN interface connector (8-pin) Pin No. Signal Name Pin No. Signal Name ZMDI3N-EYN ZMDI3P-EYP ZMDI2N-EYN ZMDI2P-EYP ZMDI0P-EYP ZMDI0N-EYN ZMDI1P-EYP ZMDI1N-EYN Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] C-11...

  • Page 434

    Appendices Appendix C Pin Assignments C.10 CN4612 USB interface connector (4-pin) Table C- 10 USB interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name USB2PS-E5V ZUSBP5-E3N ZUSBP5-E3P C.11 CN4613 USB interface connector (4-pin) Table C- 11 USB interface connector (4-pin) Pin No.

  • Page 435

    Pin No. Signal Name Pin No. Signal Name PNL-P3V PNL-P3V TSCL-P3P TSDA-P3P ZLTDA0-PYN ZLTDA0-PYP ZLTDA1-PYN ZLTDA1-PYP ZLTDA2-PYN ZLTDA2-PYP XLTXCA-PYN XLTXCA-PYP ZLTDB0-PYN ZLTDB0-PYP ZLTDB1-PYN ZLTDB1-PYP ZLTDB2-PYN ZLTDB2-PYP XLTXCB-PYN XLTXCB-PYP BKLPWM-P3P BLEN-E3P PVT-EFV PVT-EFV PVT-EFV Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] C-13...

  • Page 436

    Appendices Appendix C Pin Assignments C.14 CN6150 Speaker interface connector (4-pin) Table C- 14 Speaker interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name SPOTR-PXN SPOTR-PXP SPOTL-PXP SPOTL-PXN C.15 CN8771 FAN interface connector (4-pin) Table C- 15 FAN interface connector (4-pin) Pin No.

  • Page 437

    Signal Name ZUSB11-E3P ZUSB11-E3N C.19 CN9510 RGB interface connector (12-pin) Table C- 19 RGB interface connector (12-pin) Pin No. Signal Name Pin No. Signal Name IDSDA-P3P IDSCL-P3P MVSYNC-P3P MHSYNC-P3P MBLUE-PXP MGREEN-PXP MRED-PXP Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] C-15...

  • Page 438

    Appendices Appendix C Pin Assignments C.20 IS2100 MEDIA BRIDGE interface connector (45-pin) Table C- 20 MEDIA BRIDGE interface connector (45-pin) Pin No. Signal Name Pin No. Signal Name FMC11-P3P FMC10-P3P FMC09-P3P FMC08-P3P FMC07-P3P FMC-P3V FMC-P3V FMC14-P3P FMC10-P3P FMCD1-P3N FMC08-P3P FMC05-P3P FMC02-P3P FMC00-P3P FMC05-P3P...

  • Page 439

    C.23 CN5350 HDMI interface connector (19-pin) Table C-23 HDMI interface connector (19-pin) Pin No. Signal Name Pin No. Signal Name ZHDT2-PYN ZHDT1-PYP ZHDT2-PYN ZHDT1-PYN ZHDT0-PYP ZHDT0-PYN ZHDCK-PYP ZHDCK-PYN CECIN-S3N CEC-S5V CEC-S5V CEC-S5V HPDETI-S3P Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] C-17...

  • Page 440

    Appendices Appendix C Pin Assignments C.24 IS2621 SIM Card(BCAS, 3D card, other card)interface connector (8-pin) ( ) Table C-24 SIM Card BCAS, 3D card, other card interface connector (8-pin) Pin No. Signal Name Pin No. Signal Name UIMPWR-E3V UIRSTB-E3P UICLKB-E3P UICLKB-E3P BCCDET-P3N C.25 CN9660 Touch Sensor interface connector (10-pin)

  • Page 441

    Signal Name TPADLD-S3P IPDCLK-P5P IPDDAT-P5P C.29 CN3241 FLETP*(Touch Pad En-SW board) interface connector (2-pin) Table C- 29 FLETP*(Touch Pad En-SW board) interface connector (2-pin) Pin No. Signal Name Pin No. Signal Name TPADON-S3N Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] C-19...

  • Page 442

    Appendices Appendix C Pin Assignments C.30 CN3242 FLELE*(LED board) interface connector (10-pin) Table C- 30 FLELE*(LED board) interface connector (14-pin) Pin No. Signal Name Pin No. Signal Name DCINOR-S5N DCINGR-S5N PWLEOR-S5N BAT1OR-S5N PWLEGR-S5N BAT1GR-S5N FLMLED-P5N SATLED-P5N C-20 [CONFIDENTIAL] Qosmio F60 Serise Maintenance Manual (960-796)

  • Page 443

    Signal Name Pin No. Signal Name USB1PS-E5V ZUSBFR-E3N ZUSBFR-E3P C.33 J6071 Microphone connector (6-pin) Table C- 33 Microphone connector (6-pin) Pin No. Signal Name Pin No. Signal Name A-GND EMCINL-PXP EMCINR-PXP A-GND DETCTA-P4N Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] C-21...

  • Page 444

    Appendices Appendix C Pin Assignments C.34 CN6070 Int-Mic interface connector (2-pin) Table C- 34 Int-Mic interface connector (2-pin) Pin No. Signal Name Pin No. Signal Name IMICIN-PXP C.35 J6310 Headphone connector (6-pin) Table C- 35 Headphone connector (6-pin) Pin No. Signal Name Pin No.

  • Page 445

    Signal Name S3340-3,4 S3341-3,4 IPDCLK-P5P IPDDAT-P5P Touch Pad En-SW board (FLETP*) C.38 CN3331 System interface connector (2-pin) Table C- 38 System interface connector (2-pin) Pin No. Signal Name Pin No. Signal Name S3330-3,4 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] C-23...

  • Page 446

    Appendices Appendix C Pin Assignments LED board (FLELE*) C.39 CN9540 System interface connector (10-pin) Table C- 39 System interface connector (10-pin) Pin No. Signal Name Pin No. Signal Name DCINOR-S5N DCINGR-S5N PWLEOR-S5N PWLEGR-S5N BAT1OR-S5N BAT1GR-S5N FMLED-P5N SATLED-P5N C-24 [CONFIDENTIAL] Qosmio F60 Serise Maintenance Manual (960-796)

  • Page 447

    (FSCL-P3P) (DSPRST-S3N) LEDON-P5N PWSW-S3N PNLOFF-S3N C.41 CN3411 2 Display interface connector (10-pin) Table C- 41 2nd Display interface connector (10-pin) Pin No. Signal Name Pin No. Signal Name (DSPRST-S3N) (FSCL-P3P) (FSDA-P3P) (LDOCNT-S3P) Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL] C-25...

  • Page 448

    Appendices Appendix C Pin Assignments C-26 [CONFIDENTIAL] Qosmio F60 Serise Maintenance Manual (960-796)

  • Page 449

    Appendix D Keyboard Scan/Character Codes Scan Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Keytop Note Make Break Make Break ‘ ~ 7 & BkSp Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 450

    Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Caps Lock ‘ “ Enter Shift (L) No.102 , < . > Shift (R) [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 451

    Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Ctrl Alt (L) Space ALT (R)  Home   PgUp PgDn   Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 452

    5. * This key corresponds to key No. 42 in a 102-key model. 6. * Refer to Table D-6, No. 124 key scan code. 7. * Refer to Table D-7, No. 126 key scan code. [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 453

    Shift key, scan codes are changed as listed below: With left Shift With right Shift Set 1 E0 AA __________ E0 B6 E0 2A ___________ E0 36 Set 2 E0 F0 12 ________ E0 F0 59 E0 12 ___________ E0 59 Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 454

    AA E0 12 E0 2F E0 F0 2F E0 F0 12 Table D-4 Scan codes with Fn key Code set 1 Code set 2 Keytop Make Break Make Break CTRL LALT ARROW NUMERIC Scrl [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 455

    Code set 2 Keytop Make Break Make Break (–) Table D-6 No.124 key scan code Code set 1 Code set 2 Shift Make Break Make Break Prt Sc Common Ctrl  Shift  Alt  Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 456

    Table D-7 No.126 key scan code Shift Code set 1 Code set 2 Make Make Pause Common* E1 1D E1 F0 Ctrl* E0 46 7E E0 F0 *: This key generates only make codes. [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 457: Appendix E Key Layout

    Appendix E Key Layout Appendices Appendix E Key Layout 4.31 E.1 United Kingdom (UK) Keyboard Figure E-1 UK keyboard 4.31 E.2 United States (US) Keyboard Figure E-2 US keyboard Qosmio F60 Series Maintenance Manual (960-796)[CONFIDENTIAL]...

  • Page 458

    Appendices Appendix E Key Layout Japan (JP) Keyboard 図 E-3 JP keyboard [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 459

    Appendix E Key Layout TECRA 9100 Maintenance Manual (960-347)

  • Page 460

    Appendix F Wiring diagrams Appendices Appendix F Wiring diagrams RGB Monitor Loopback Connector Figure F-1 RGB Monitor Loopback Connector LAN Loopback Connector Figure F-2 LAN Loopback Connector Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 461

    Appendices Appendix F Wiring diagrams [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 462

    3. If you fail to rewrite BIOS, then when you next turn on the power, a message may be displayed that the contents of the BIOS have been erased. In this case, insert the BIOS rewriting disk and the BIOS will be rewritten. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 463

    Appendices Appendix G BIOS rewrite procedures [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

  • Page 464

    5. Turn on the power while holding down the Tab key. (Keep holding down the key until a beep sounds.) The EC/KBC rewriting starts. 6. When the EC/KBC rewrite is completed, the system is automatically turned off. Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 465

    Appendix I Reliability Appendices Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time between Failures) in maximum configuration. Table I-1 MTBF Time (hours) NB11P+ TV model 6267.65h Qosmio F60 Series Maintenance Manual (960-796) [CONFIDENTIAL]...

  • Page 466

    Appendices Appendix I Reliability [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)

Comments to this Manuals

Symbols: 0
Latest comments: