4 Replacement Procedures
4.18 TV tuner
Removing the TV tuner
The following describes the procedure for removing the TV tuner (See Figure 4-36).
1. Disconnect the TV tuner antenna cable from the connectors on the TV tuner and
system board.
2. Remove the following screws securing the TV tuner.
3. Remove the TV tuner from the connector CN2700 on the system board.
4-56
Downloaded from LpManual.com Manuals
• M2.0×3C
BIND screw
M2.0x3C BIND
TV tuner
Figure 4-36 Removing the TV tuner
[CONFIDENTIAL]
×2
TV tuner antenna cable
CN2700
QOSMIO G50 Maintenance Manual (960-683)
4.18 TV tuner