4.17 Back cover
Installing the Back cover
The following describes the procedure for installing the back cover (See Figure 4-35).
1. Set the back cover under the guide of the base assembly.
NOTE: When setting the back cover, be careful not to pinch the DC-IN jack cable and
2. Secure the back cover with the following screws.
•
QOSMIO G50 Maintenance Manual (960-683)
Downloaded from LpManual.com Manuals
right LED cable.
M2.5×6B
FLAT HEAD screw
4 Replacement Procedures
×4
[CONFIDENTIAL]
4-55