Procedure 3 Diagnostic Test Program Execution Check - Toshiba T6400 Maintenance Manual

Check 5 If test code 60 is displayed, go to the FDD Troubleshooting Procedures in Section 2.5.

Procedure 3 Diagnostic Test Program Execution Check

Execute the following tests from the Diagnostic Test Menu. Refer to Chapter 3, "Tests and Diag-
nostics" for detailed instructions on how to perform these tests.
1. System test
2. Memory test
3. Printer test
4. ASYNC test
5. Real timer test
6. NDP test (if the NDP is installed.)
If an error is detected during these tests, replace the system board with a new one.
2-19