Toshiba QOSMIO G50 Maintenance Manual page 182

3 Tests and Diagnostics
4. DUMP program
(a) When DUMP is selected, the following message appears:
(b) Select a drive type. If
(c) Select a drive number and the following message will be displayed.
(d) If
(e) The following message will appear:
(f) Insert a source disk and press any key and the following message will appear:
(g) Set the track number, head number and sector number you want to dump. The
(h) The following message will appear when selecting
(i) Select a drive number and the following message will be displayed.
(j) Set the LBA number you want to dump. The system will access the disk and
3-56
Downloaded from LpManual.com Manuals
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
2:HDD
is selected, the following message will appear:
1:FDD
Select drive number
Format type select (1:2DD, 3:2HD) ?
is selected, the following message will appear. Select a media mode.
3:2HD
2HD media mode (1:1.20MB, 2:1.44MB, 3:1.23MB)?
Insert source disk into drive A:
Press any key when ready.
—— Max. address ——
[Track ] = XXXX
[Head ] = XX
[Sector] = XX
Track number ????
system will access the disk and dump a list. Then the message shown in (k)
will appear.
Select drive number
---Max. address ---
[LBA ] = XXXXXXXXX
LBA number ????????
dump a list.
[CONFIDENTIAL]
3.24 Floppy Disk Drive Utilities
is selected, the display will go to step (h). If
(1:A, 2:B) ?
2:HDD
(1:C, 2:D) ?
QOSMIO G50 Maintenance Manual (960-683))
in (a).