4 Replacement Procedures
4.3.2 Bridge media (SD Card/Memory Stick/xD Picture Card/MultiMedia card)
Removing the Bridge media
The following describes the procedure for removing the Bridge media (See Figure 4-4).
CAUTION: Insert or remove a Bridge media in accordance with any instructions in the
1. Push the Bridge media. It will pop out partly when you release, so pull out the card.
(For an instance, SD card is described in the figure 4-4.)
Bridge media
(SD card)
Installing the Bridge media
The following describes the procedure for installing the Bridge media (See Figure 4-4).
1. Insert the Bridge media and press it until it is securely connected.
4-14
Downloaded from LpManual.com Manuals
each Bridge Media manual or the manuals of the computer system you are
using.
Figure 4-4 Removing the Bridge media
[CONFIDENTIAL]
4.3 ExpressCard/Bridge media
QOSMIO G50 Maintenance Manual (960-683)