Toshiba QOSMIO G50 Maintenance Manual page 216

3 Tests and Diagnostics
This option lets you set the device configuration.
NOTE: 1. When using installed OS, selecting "Setup by OS" is recommended.
8. Battery
(a) Battery Save Mode
This option is used to select Full Power, Low Power or User Setting of the battery
save mode. When you select the battery save mode, the followings will appear.
NOTE: Display of the LCD Brightness will be changed in the condition below:
User Setting
Battery Save Options
3-90
Downloaded from LpManual.com Manuals
All Devices
Setup by OS
2. When executing test programs, be sure to select "ALL Device". And after
the test end, select "Setup by OS".
Full Power
Low Power
(*1) Operating the battery
(*2) Using the AC adapter
Use this option to set the battery save parameters on
the sub-window, BATTERY SAVE OPTIONS.
[CONFIDENTIAL]
BIOS sets all devices.
Initializes devices, which is needed to load an operating
system. Operating system initializes other devices.
(Default)
The following shows full power settings.
The following shows low power settings.
QOSMIO G50 Maintenance Manual (960-683)
3.31 SETUP