Hdd - Toshiba QOSMIO G50 Maintenance Manual

4.4 HDD

4.4

HDD

Removing the HDD
The following describes the procedure for removing the HDD (See Figure 4-5 to 4-8).
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
1. Turn the computer upside down.
2. Remove the following screw securing the HDD-1 cover.
3. Insert your finger into the slit and remove the HDD-1 cover.
4. Remove the following screw and HDD-1 assembly from the connector on the system
board.
M2.5x6B FLAT HEAD
M2.5x6B FLAT HEAD
QOSMIO G50 Maintenance Manual (960-683)
Downloaded from LpManual.com Manuals
data loss or damage to the device.
• M2.5×6B
FLAT HEAD screw
• M2.5×6B
FLAT HEAD screw
Slit
HDD-1assembly
Figure 4-5 Removing the HDD-1 assembly
4 Replacement Procedures
×1
×1
HDD-1 cover
[CONFIDENTIAL] 4-15