4.38 Fluorescent lamp
4. Separate the panel assembly and backlight unit.
CAUTION: Handle with care not to damage COF of S/D and G/D IC.
Panel assembly
Assembling the fluorescent lamp
The assembly procedure of the 18.4-inch Samsung fluorescent lamp is the reverse of the
above disassembly procedure. Refer to figures 4-80 to 4-83.
1. Install the panel assembly on the backlight unit.
2. Install the top chassis on the molded frame.
3. Stick yellow tape, lamp-wire tape and Al tape.
4. Stick the PCB cover.
QOSMIO G50 Maintenance Manual (960-683)
Downloaded from LpManual.com Manuals
Figure 4-83 Replacing Samsung fluorescent lamp (FDH) (4)
4 Replacement Procedures
[CONFIDENTIAL]
4-119