Pci-E-Mini Card Slot3 Troubleshooting; Procedure 1 Connector Check And Replacement Check - Toshiba QOSMIO G50 Maintenance Manual

2 Troubleshooting Procedures

2.16 PCI-E-Mini card slot3 Troubleshooting

To check if PCI-E-Mini card slot3 is malfunctioning or not, follow the troubleshooting
procedures below as instructed.
The following card is connected to PCI-E-Mini card slot3.
TV turner
GPS
Wireless UWB
Procedure 1:
Procedure 1
The connection of cables, boards and module may be defective. Otherwise, they may be faulty.
Disassemble the computer following the steps described in Chapter 4 and perform the
following checks:
Check 1
If any of the connections are loose, reconnect firmly and repeat Procedure 1. If
there is still an error, go to Check 2.
2-58
Downloaded from LpManual.com Manuals
Connector Check and Replacement Check
Connector Check and Replacement Check
Make sure the PCI-E-Mini card slot3 is firmly connected to CN2700 on the
system board.
[CONFIDENTIAL]
2.16 PCI-E-Mini card slot3 Troubleshooting
QOSMIO G40 Maintenance Manual (960-632)