4 Replacement Procedures
4.19 GPS
Removing the GPS
The following describes the procedure for removing the GPS (See Figure 4-37).
1. Disconnect the GPS antenna cable from the connector on the GPS.
2. Remove the following screws securing the GPS.
3. Remove the GPS from the connector CN2700 on the system board.
4-58
Downloaded from LpManual.com Manuals
• M2.0×3C
BIND screw
M2.0x3C BIND
GPS antenna cable
GPS
Figure 4-37 Removing the GPS
[CONFIDENTIAL]
×2
CN2700
QOSMIO G50 Maintenance Manual (960-683)
4.19 GPS