4.16 Wireless LAN card
Installing the wireless LAN card
The following describes the procedure for installing the wireless LAN card (See Figure 4-33
and 4-34).
1. Insert the wireless LAN card into the connector CN2600 on the system board
slantwise.
2. Secure the wireless LAN card with the following screws while pushing it.
3. Connect the wireless LAN antenna cables to the terminals on the wireless LAN card.
NOTE: white cable to MAIN, black cable to AUX for the two antenna cables and white
QOSMIO G50 Maintenance Manual (960-683)
Downloaded from LpManual.com Manuals
• M2.0×3C
BIND screw
cable to 1, black cable to 2 and gray cable to 3 marked on the wireless LAN card
for three antenna cables.
4 Replacement Procedures
×2
[CONFIDENTIAL]
4-53