Toshiba QOSMIO G50 Maintenance Manual page 261

4.9 Cover assembly
4. Turn over the computer and open the display.
5. Peel off the insulator (HNS HLD KB INSULATOR) and disconnect the
camera/microphone cable and Bluetooth cable from the connector CN9550 and
CN4400 on the system board.
6. Disconnect the touch sensor cable, power switch cable, volume cable and touch
pad SW/LED cable from the connector CN9650, CN3300, CN3330 and CN3240 on
the system board.
Power switch cable
(connected to CN3300)
QOSMIO G50 Maintenance Manual (960-683)
Downloaded from LpManual.com Manuals
Camera/microphone cable
(connected to CN9550)
Touch sensor cable
(connected to CN9650)
Volume cable
(connected to CN3330)
Figure 4-19 Removing the cover assembly (3)
4 Replacement Procedures
Insulator
Bluetooth cable
(connected to CN4440)
Touch pad SW/
LED cable
(connected to CN3240)
[CONFIDENTIAL] 4-31