Toshiba Qosmio G50 Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Qosmio G50 Series
  6. User manual
Toshiba Qosmio G50 Series User Manual

Toshiba Qosmio G50 Series User Manual

Hide thumbs Also See for Qosmio G50 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Qosmio G50 Series

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Qosmio G50 Series

Summary of Contents for Toshiba Qosmio G50 Series

  • Page 1 User’s Manual Qosmio G50 Series...

  • Page 2: Table Of Contents

    Instruction Manual for Safety and Comfort ....xxviii The cautions on use of a Qosmio G50 Series computer ..xxix...
  • Page 3 Qosmio G50 Series TOSHIBA Value Added Package ......1-14 Utilities and Applications........1-15 Optional accessories .
  • Page 4 Listen to radio ......... . . 8-18 TOSHIBA DVD PLAYER ........8-19 QosmioEngine .
  • Page 5 TOSHIBA support ........

  • Page 6: Copyright

    This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA Qosmio G50 Series Portable Personal Computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manual.

  • Page 7: Trademarks

    Windows, Microsoft and Windows Vista are registered trademarks of Microsoft Corporation. Photo CD is a trademark of Eastman Kodak Company. Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. Memory Stick, Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo and i.LINK are trademarks or registered trademarks of Sony...

  • Page 8: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, Universal Serial Bus...

  • Page 9: Eu Conformity Statement

    "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC and/or R&TTE Directive 1999/5/EC. Responsible for CE- TOSHIBA EUROPE GMBH, Hammfelddamm 8, marking: 41460 Neuss, Germany. Manufacturer: Toshiba Corporation, 1-1 Shibaura 1-chome,...

  • Page 10: Modem Warning Notice

    Qosmio G50 Series Modem warning notice This information is applicable to the models equipped with a built-in modem. Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN).

  • Page 11: Japan Regulations

    Qosmio G50 Series Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan region mode. It is illegal to use the modem in Japan with any other selection.

  • Page 12: Type Of Service

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.

  • Page 13: Instructions For Ic Cs-03 Certified Equipment

    Qosmio G50 Series Fax branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a...

  • Page 14: Notes For Users In Australia And New Zealand

    Qosmio G50 Series The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
  • Page 15 Qosmio G50 Series Notes for use of this device in New Zealand ■ The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which...
  • Page 16 Qosmio G50 Series ■ When used in the Auto Answer mode, the S0 register must be set with a value of either 3 or 4. This ensures: ■ a person calling your modem will hear a short burst of ringing before the modem answers.

  • Page 17: Following Information Is Only For Eu-Member States

    Qosmio G50 Series General conditions As required by PTC 100, please ensure that this office is advised of any changes to the specifications of these products which might affect compliance with the relevant PTC Specifications. The grant of this Telepermit is specific to the above products with the marketing description as stated on the Telepermit label artwork.

  • Page 18: Disposing Of The Computer And The Computer's Batteries

    Qosmio G50 Series Disposing of the computer and the computer’s batteries ■ Discard this computer in accordance with applicable laws and regulations. For further information, contact your local government. ■ This computer contains rechargeable batteries. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them.

  • Page 19: Optical Disc Drive Safety Instructions

    Qosmio G50 Series Optical disc drive safety instructions Be sure to check the international precautions at the end of this section. TEAC DVD Super Multi drive DV-W28S ■ The DVD Super Multi drive model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference.
  • Page 20 Qosmio G50 Series Panasonic Communications DVD Super Multi drive UJ870 ■ The DVD Super Multi drive model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.

  • Page 21: International Precautions

    Qosmio G50 Series International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service...
  • Page 22 Qosmio G50 Series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S...

  • Page 23: Preface

    TV program using the My TV feature of Media Center or the Full size remote controller. This manual tells how to set up and begin using your Qosmio G50 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 24 Qosmio G50 Series Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer. The indicator...
  • Page 25 Qosmio G50 Series Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. Terminology This term is defined in this document as follows: Start The word "Start" refers to the "...

  • Page 26: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 27: Creating A Computer-Friendly Environment

    Qosmio G50 Series Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation.

  • Page 28: Pressure Or Impact Damage

    Qosmio G50 Series Pressure or impact damage Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer's components or otherwise cause it to malfunction. Mobile phones Please be aware that the use of mobile phones can interfere with the audio system.

  • Page 29: The Cautions On Use Of A Qosmio G50 Series Computer

    Qosmio G50 Series The cautions on use of a Qosmio G50 Series computer 1. Clean any dust accumulated on the computer's cooling vents. The cooling vents are located on the back and underside of the computer. When you use your computer in a dusty area, dirt and debris may accumulate on the cooling vents at the under side of your unit.

  • Page 30: Chapter 1 Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 31 Introduction Documentation ■ Qosmio G50 Series Portable Personal Computer User’s Manual (User’s Manual) ■ Instruction Manual for Safety and Comfort ■ End User License Agreement If any of the items are missing or damaged, contact your dealer immediately. Software The following Windows operating system and utility software are pre- installed.

  • Page 32: Hardware

    Introduction Hardware This section describes the hardware of your computer. The actual specifications may vary depending on the model you purchased. Processor Built-in The computer is equipped with one of the ® following Intel processor. ■ ® Intel Core 2 Duo Processor, which incorporates a 3MB level2 cache memory and also supports Enhanced Intel ®...
  • Page 33 Legal Footnote (Memory (Main System)) For more information regarding Memory (Main System), please refer to the Legal Footnotes section in Chapter 11 or click the *2 above. Toshiba Quad Core A co-processor specialized for media streaming processes (real-time image processing such as...
  • Page 34 Introduction Disks Hard disk drive or This computer is equipped with the following types of hard disk drive (HDD). The capacity of Solid state drive each hard disk drive model is different. Some models are equipped with a "Solid State Drive (SSD)"...
  • Page 35 Introduction Optical disc drive DVD Super Multi The drive reads DVD-ROM's at a maximum 8x drive speed and CD-ROM's at a maximum 24x speed, and writes CD-R's and CD-RW's at up to 24x speed, DVD-R's, DVD+R's and DVD+RW's at up to 8x speed, DVD-RW's, DVD-R (Dual Layer) and DVD+R (Double Layer) at up to 6x speed, DVD-RAM at up to 5x speed, and supports the...
  • Page 36 Introduction Display The computer's internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability. Display panel 18.4" TFT LCD screen, 32 million colors, with one of the following resolutions: ■...
  • Page 37 Introduction Universal Serial Bus The computer supports multiple Universal Serial (USB 2.0) Bus ports that comply with the USB 2.0 standard. The ports with the icon ( ) has USB Sleep and Charge. One of the USB ports has eSATA (External Serial ATA) function.
  • Page 38 Introduction TV antenna port Connect the coaxial cable to this port to watch TV programs on your computer or record them. The dimensions and shape of the TV antenna port vary for different regions. HDMI out port HDMI out port can connect with Type A connector HDMI cable.
  • Page 39 Introduction Full size remote Use this device to navigate when watching TV or controller playing CDs/DVDs. Some models are equipped with the Full size remote controller Slim size remote Use this device to navigate when playing controller CDs/DVDs. This device is stored within the ExpressCard slot. Some models are equipped with the Slim size remote controller.
  • Page 40 Introduction ™ Some computers in this series have Bluetooth Bluetooth wireless communication function which eliminates the need for cables between electronic devices such as computers and printers and mobile phones. When it is enabled, Bluetooth provides the wireless personal area network environment which is safe and trustworthy, that is quick and easy.

  • Page 41: Special Features

    Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures. *1 To access the Power Options, click Start -> Control Panel -> System and Maintenance ->...
  • Page 42 USB port when your computer is in Sleep Mode, Hibernation Mode or in the shutdown state. To run the HW Setup program, click Start -> All Programs -> TOSHIBA ->Utilities -> HWSetup. User’s Manual 1-13...

  • Page 43: Toshiba Value Added Package

    The "USB Wakeup function" operates under Windows Vista operating system and it works for all USB ports. TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the...

  • Page 44: Utilities And Applications

    The TOSHIBA Accessibility utility provides support to movement impaired users when they Accessibility need to use the TOSHIBA Hot-key functions. In use, the utility allows you to make the FN key 'sticky', that is you can press it once, release it, and they press one of the 'F' keys in order to access its specific function.
  • Page 45 TOSHIBA HD The TOSHIBA HD Console displays the usage Console for each core in the TOSHIBA Quad Core HD Processor and allows applications which use the TOSHIBA Quad Core HD Processor to be started. The TOSHIBA HD Console is displayed in the Windows Sidebar.
  • Page 46 TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the...
  • Page 47 In order to determine if the optical disc drive installed in your computer supports Labelflash follow the steps as detailed below: 1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.
  • Page 48 Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. TOSHIBA DVD This software is provided for playback of DVD PLAYER Video.

  • Page 49: Optional Accessories

    You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use. For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: DDR2-800 Memory A 1,024MB or 2,048MB memory module (DDR2- 800) can easily be installed in the computer.

  • Page 50: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section in Chapter 11 or click the *8 above.

  • Page 51: Left Side

    The Grand Tour Wireless Slide this switch to the right to turn on Wireless communication LAN and Bluetooth functions. Slide it to the left to switch turn off the functions. All models are provided with a Wireless communication switch although only some models are equipped with both Wireless LAN and Bluetooth functions.
  • Page 52 The Grand Tour In order to use the computer's Bridge media slot, ExpressCard slot, i.LINK (IEEE1394) port or USB port (left side), open the left side cover. Open the cover by pressing the top right section of the cover to unlock it. Bridge media slot This slot lets you insert an SD/SDHC memory card, miniSD/microSD Card, Memory Stick...

  • Page 53: Right Side

    The Grand Tour Right side The following figure shows the computer’s right side. ■ The below illustration shows the modem jack model. ■ A modem jack icon and FM antenna port icon are printed on this computer. However the actually equipped functions (modem or FM tuner function) will vary for different models.

  • Page 54: Back

    The Grand Tour ■ Connection to any communication line other than an analog phone line could cause a computer system failure. ■ Connect the built-in modem only to ordinary analog phone lines. ■ Never connect the built-in modem to a digital line (ISDN). ■...
  • Page 55 The Grand Tour HDMI out port HDMI out port can connect with Type A connector HDMI cable. HDMI cable can send video and audio signals. In addition to this, it can send and receive control signals. Infrared transmitter Connect the infrared transmitter cable to the cable ports infrared transmitter cable port on the computer and to the set-top box.

  • Page 56: Underside

    The Grand Tour Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Underside The following figure shows the underside of the computer.

  • Page 57: Front With The Display Open

    The Grand Tour Battery release latch Slide and hold this latch into its 'Unlock' position in order to release the battery pack ready for removal. For more detailed information on removing the battery pack please refer to Chapter 6, Power. Battery pack The battery pack provides power to the computer when the AC adaptor is not connected.
  • Page 58 The Grand Tour System indicators These LED indicators allow you to monitor the status of various computer functions and are described in more detail within the System indicators section. Display hinge The display hinge allows the display panel to be position at a variety of easy-to-view angles.
  • Page 59 The Grand Tour Fingerprint Sensor This sensor enables you to enroll and recognize a fingerprint. Some models are equipped with a Fingerprint Sensor. For detailed information on Fingerprint Sensor, refer to Chapter 4, Using the Fingerprint Sensor. Web Camera Web Camera is a device that allows you to record video or take photographs with your computer.

  • Page 60: System Indicators

    The Grand Tour Volume control dial Use this dial to adjust the volume of the internal stereo speakers and optional external stereo headphones (if connected). Turn the dial clockwise to increase the volume and turn it counter-clockwise to decrease the volume.

  • Page 61: Keyboard Indicators

    The Grand Tour Hard Disk Drive The Hard Disk Drive indicator glows white whenever the computer is accessing the built-in hard disk drive, optical disc drive or eSATA device. Bridge media slot The Bridge media slot indicator glows white when the computer is accessing the Bridge media slot.

  • Page 62: Optical Disc Drives

    This section describes the types of writable CD/DVD discs. Check the specifications of your drive to see the types of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Please refer to Chapter 4, Operating Basics for further information.
  • Page 63 The Grand Tour DVDs ■ DVD-R, DVD+R, DVD-R (Dual Layer) and DVD+R (Double Layer) discs can be written only once. The recorded data cannot be erased or changed. ■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than once. Formats The drive supports the following formats.

  • Page 64: Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 65: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: ■ All users should be sure to read the section Starting up for the first time. ■ Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer.

  • Page 66: Connecting The Ac Adaptor

    ■ Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 67 Getting Started 1. Connect the power cord to the AC adaptor. Figure 3-1 Connecting the power cord to the AC adaptor (2-pin plug) Figure 3-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model.

  • Page 68: Opening The Display

    Getting Started Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.

  • Page 69: Turning On The Power

    Getting Started ■ As the display panel cannot be opened until 180 degrees, please be careful of the angle when flipping open the display panel. ■ Be careful not to open the display panel too far as this could put stress on the display panel’s hinges and cause damage.

  • Page 70: Starting Up For The First Time

    Getting Started 2. Press and hold the computer's power button for two or three seconds. Power button Figure 3-5 Turning on the power Starting up for the first time The Microsoft Windows Vista Startup Screen will be the first screen displayed when you turn on the power.

  • Page 71: Sleep Mode

    Getting Started 3. Click Start. 4. Click the arrow button ( ) located in the power management buttons ) and select Shut Down from the menu. 5. Turn off any peripheral devices connected to your computer. Do not turn the computer or peripheral devices back on immediately - wait a short period to avoid any potential damage.
  • Page 72 Getting Started Benefits of Sleep Mode The Sleep Mode feature provides the following benefits: ■ Restores the previous working environment more rapidly than does the Hibernation Mode feature. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature.

  • Page 73: Hibernation Mode

    Getting Started Hibernation Mode The Hibernation Mode feature saves the contents of memory to the hard disk drive when the computer is turned off so that, the next time it is turned on, the previous state is restored. Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer.

  • Page 74: Restarting The Computer

    Getting Started 4. Enable the desired Hibernation Mode settings for When I press the power button and When I close the lid. 5. Click the Save changes button. Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer will take a moment to save the current data in memory to the hard disk drive.

  • Page 75: System Recovery

    Getting Started System Recovery Options The System Recovery Options feature is installed on the hard disk when shipped from the factory. The System Recovery Options menu includes tools to repair startup problems, run diagnostics or restore the system. See the Windows Help and Support content for more information about Startup Repair.
  • Page 76 Getting Started A recovery image of the software on your computer is stored on the hard disk drive, and can be copied to either CD or DVD media by using the following steps: 1. Select either blank CD or DVD media. 2.
  • Page 77 Getting Started When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Turn off your computer. 2. While holding down 0 (zero) key on the keyboard, turn on your computer. 3.

  • Page 78: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

  • Page 79: Av Controller

    Operating Basics You can also tap the Touch Pad to perform functions similar to those of the left button on a standard mouse. Click: Tap once Double-click: Tap twice Drag and drop: Tap to select the item(s) you want to move, leave your finger on the Touch Pad after the second tap and then move the item(s) to their new destination.

  • Page 80: Points To Note About The Fingerprint Sensor

    Operating Basics Fingerprint cannot be used in models that do not have a fingerprint module installed. How to Swipe your Finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures: Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you until the sensor surface becomes visible.
  • Page 81 Operating Basics ■ Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt may scratch it. ■ Do not paste stickers or write on the sensor. ■ Do not touch the sensor with a finger or any other object which may have a build-up of static electricity on it.

  • Page 82: Fingerprint Registration

    Operating Basics Setup Procedure Please use the following procedure when first using fingerprint authentication. Fingerprint Registration You should initially enroll the required authentication data using the Fingerprint Enrollment Wizard. ■ In use, the fingerprint authentication system will use the same username and password as defined within the Windows operating system.
  • Page 83 ■ The recognition success rate may differ from user to user. ■ Toshiba does not guarantee that this fingerprint recognition technology will be error-free. User’s Manual...

  • Page 84: Points To Note About The Fingerprint Utility Software

    Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
  • Page 85 Operating Basics ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint Pre-OS Authentication and its extended function to allow fingerprints to be used to access the computer when it is turned on.
  • Page 86 TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.

  • Page 87: Web Camera

    Operating Basics Web Camera Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. Camera Assistant Software will help you to add various video effects to your video or photograph.

  • Page 88: Using The Toshiba Face Recognition

    Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
  • Page 89 Operating Basics ■ The Registration screen is displayed for a logged-in user whose face has not been registered. ■ The Management screen is displayed for a logged-in user whose face has already been registered. 2. Click the Register face button in the Management screen. The Registration screen is displayed.
  • Page 90 How to launch the help file For further information on this utility, please refer to help file. 1. To launch the help file, click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition.
  • Page 91 Operating Basics 4. "Please turn your face to the camera" will be displayed. 5. Verification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another. ■ If an error occurs during authentication, you will be returned to the Select Tiles screen.

  • Page 92: Using Optical Disc Drives

    Operating Basics Using optical disc drives The full-size drive provides high-performance execution of CD/DVD-ROM- based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD- ROM, an indicator on the drive glows.
  • Page 93 Operating Basics 3. Lay the CD/DVD, label side up, in the disc tray. Laser lens Figure 4-8 Inserting a CD/DVD When the disc tray is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the disc tray.

  • Page 94: Removing Discs

    Operating Basics Removing discs To remove the CD/DVD, follow the steps as detailed below: Do not press the eject button while the computer is accessing the media drive. Wait for the optical disc drive indicator to go out before you open the disc tray.

  • Page 95: Writing Cd/Dvds On Dvd Super Multi Drives

    ■ CD-R/RW media cannot be accessed using the Create CD/DVD option in Media Center. ■ To write data to CD-R/-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. User’s Manual 4-18...

  • Page 96: Important Message

    Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or DVD- RAM media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. User’s Manual 4-19...
  • Page 97 Operating Basics CD-R: TAIYO YUDEN CO., Ltd. MITSUBISHI KAGAKU MEDIA CO., LTD. Ricoh Co., Ltd. Hitachi Maxell,Ltd. CD-RW: (Multi-Speed and High-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. Ricoh Co., Ltd. CD-RW: (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN Co.,Ltd.
  • Page 98 Operating Basics DVD+RW: Ricoh Co., Ltd. (for 2.4x, 4x and 8x speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x, 4x and 8x speed media) DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co.,Ltd. (for 3x and 5x speed media) Hitachi Maxell,Ltd.

  • Page 99: When Writing Or Rewriting

    CD/DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 100: Toshiba Disc Creator

    CD Player' function to record music to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media. ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video or DVD-ROM material that has copyright protection. ■...
  • Page 101 Operating Basics ■ You might not be able to use the 'Disc Backup' function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.
  • Page 102 Simplified steps for making a Labelflash DVD: 1. Insert a Labelflash disc in optical disc drive. Set PRINTING SIDE for underside. 2. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.
  • Page 103 Please refer to the Help and Manual files for additional Ulead DVD MovieFactory information. ■ Opening the Ulead DVD MovieFactory Manual Start -> All Programs -> DVD MovieFactory for TOSHIBA -> User Manual -> DVD MovieFactory User Manual Important information for use Note the following limitations when you write Video DVD: 1.

  • Page 104: Media Care

    Operating Basics ■ Bump or cause vibration to the computer. ■ Use the Mode control button and Audio/Video control button to reproduce music or voice. ■ Open the DVD drive. ■ Install, remove or connect external devices, including the following: SD/SDHC memory card, USB device, external display, i.LINK devices, optical digital devices.

  • Page 105: Floppy Diskettes

    Operating Basics Floppy diskettes The USB floppy diskette drive is available only as an option. 1. Store your floppy diskettes in the container they came in to protect them and keep them clean. If a floppy diskette becomes dirty, clean it with a soft, lightly dampened cloth - do not use cleaning fluid.

  • Page 106: Tv Tuner

    Operating Basics TV Tuner Use the My TV feature of Windows Media Center to watch TV programs or record them. The dimensions and shape of the TV antenna port vary for different regions. Some models are equipped with a TV tuner. ■...

  • Page 107: Sound System

    Operating Basics 2. Connect the coaxial cable to the TV antenna port of your computer. TV antenna port Coaxial cable Figure 4-11 Connecting the coaxial cable When you have been using a descrambler to receive the programs on cable TV or satellite broadcasting, connect the set-top box and splitter to the coaxial cable.

  • Page 108: Changing System Sounds

    Operating Basics Changing System Sounds System sounds are assigned to inform you when certain events happen. This section explains how select an existing scheme or save one you have modified. To launch the configuration dialog window for system sounds, follow the steps below.
  • Page 109 Operating Basics Power Management The audio controller in your computer can be turned off when the audio function is not used. To adjust the configuration of audio power management, click the battery button ■ When audio power management is enabled, the circle button at the upper left of the Power Management is blue and convex.

  • Page 110: Modem

    Using the modem in an area not specified for use may cause a system failure. Check the specified areas carefully before using it. To select a region, follow the steps as detailed below: 1. Click Start -> All Programs -> TOSHIBA -> Networking -> Modem Region Select. User’s Manual...

  • Page 111: Properties Menu

    Operating Basics If it is available, do not use the Country/Region Select function included as part of the modem setup utility within the Control Panel - if you change the country/region setting this way you may find that the change does not take effect.

  • Page 112: Dialing Properties

    Operating Basics Dialing Properties You should select this item in order to display the dialing properties. If you are using the computer in Japan, the Telecommunications Business Law requires that you select Japan region mode. It is illegal to use the modem in Japan with any other selection.

  • Page 113: Fm Tuner

    Operating Basics Disconnecting the modular cable To disconnect the modular cable, follow the steps as detailed below: 1. Pinch the lever on the plug in the telephone jack and pull it out from within the connector. 2. Pinch the lever on the plug in the computer's modem jack and pull it out from within the computer.

  • Page 114: Wireless Communications

    Operating Basics Wireless communications The computer's wireless communication function supports both Wireless LAN and Bluetooth devices. All models are provided with Wireless Communication switch. Some models are equipped with both Wireless LAN and Bluetooth functions. Wireless LAN The Wireless LAN is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE802.11 Wireless LAN standard.

  • Page 115: Bluetooth Wireless Technology

    ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Bluetooth wireless technology...

  • Page 116: Product Support

    The latest information regarding operating system support, language support or available upgrades can be found on our web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the United States. Wireless communication switch You can enable or disable Wireless communication function, with the on/off switch.

  • Page 117: Lan

    Operating Basics Wireless communication indicator The wireless communication indicator shows the status of the computer's wireless communication functions. Indicator status Indication Indicator off The wireless communication switch is off - no wireless functionality is available. Indicator glows Wireless communication switch is on. Wireless LAN or Bluetooth is turned on by an application.

  • Page 118: Connecting The Lan Cable

    Operating Basics Connecting the LAN cable To connect the LAN cable, follow the steps as detailed below: ■ Connect the AC adaptor before connecting the LAN cable. The AC adaptor must remain connected during LAN use. If you disconnect the AC Adaptor while the computer is accessing a LAN, the system may hang up.

  • Page 119: Computer Handling

    Operating Basics Disconnecting the LAN cable To disconnect the LAN cable, follow the steps as detailed below: Make sure the LAN Active indicator (orange LED) is out before you disconnect the computer from the LAN. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector.

  • Page 120: Moving The Computer

    Operating Basics Using the cleaning cloth Some models include 1 cleaning cloth. The cleaning cloth can be used to wipe away dust and fingerprints from the keyboard and palm rest area of your computer. ■ When wiping the keyboard, palm rest and display panel, do so gently without using excessive pressure.

  • Page 121: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.

  • Page 122: Function Keys: F1

    Soft keys: FN key combinations The FN (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
  • Page 123 The Keyboard Sleep: Pressing FN + F3 switches the system to Sleep Mode. Hibernate: Pressing FN + F4 switches the system to Hibernation Mode. Output: Pressing FN + F5 changes the active display device. To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.

  • Page 124: Windows Special Keys

    FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F Number" key. To start the TOSHIBA Accessibility utility, click Start -> All Programs ->...

  • Page 125: Desktop-Style Keyboard

    The Keyboard Desktop-style Keyboard The Qosmio G50 Series comes with a "desktop-style" keyboard built into it. This means it is full-sized and features a full set of numeric function keys (also known as calculator keys) on the right-hand side. Unlike other notebooks computers with smaller keyboards, there is no 'Numeric Mode' or any numeric keyboard overlay.

  • Page 126: Chapter 6 Power

    Chapter 6 Power The computer's power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging and changing batteries, tips for saving battery power, and information on the different power-up modes.

  • Page 127: Monitoring Of Power Condition

    Power Table 6-1 Power conditions continued Power on Power off (no operation) Battery charge • Operates adaptor is above low • LED: Battery off battery trigger DC IN off connected point Battery charge • Operates is below low • LED: Battery battery trigger flashes orange point...

  • Page 128: Dc In Indicator

    Power DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: Indicates the AC adaptor is connected and is White correctly supplying power to the computer. Indicates a problem with the power supply.
  • Page 129 Power Before you remove the battery pack, save your data and shut down the computer, or place the computer into Hibernation Mode. Please be aware that, when placing the computer into Hibernation Mode, the contents of memory will be saved to the hard disk drive, although for safety sake, it is best to also save your data manually.

  • Page 130: Charging The Batteries

    ■ The computer's RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.

  • Page 131: Battery Charging Notice

    Power Time Refer to User’s Manual about Charging time. Battery charging notice The battery may not begin charging immediately under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all). To ensure the battery charges to its full capacity, you should charge it at room temperature of between 5°...

  • Page 132: Maximizing Battery Operating Time

    Power Maximizing battery operating time A battery's usefulness depends on how long it can supply power on a single charge, while how long the charge lasts in a battery depends on: ■ Processor speed ■ Screen brightness ■ System Sleep Mode ■...

  • Page 133: Replacing The Battery Pack

    Power 4. Connect the AC adaptor to the DC IN 19V jack of the computer, and to a wall outlet that is supplying power. The DC IN indicator should glow white, and the Battery indicator should glow orange to indicate that the battery pack is being charged, however, in the event that DC IN indicator does not glow this indicates that power is not being supplied - check the connections for the AC adaptor and the power...
  • Page 134 Power 5. Slide the battery safety lock towards the release ( ) position to make the battery release latch movable. Battery pack Battery safety lock Figure 6-1 Releasing the battery pack (1) 6. Slide and hold the battery release latch (1) to disengage the battery pack and then remove it from the computer (2).

  • Page 135: Toshiba Password Utility

    Figure 6-3 Securing the battery pack 3. Turn your computer over. TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set by the TOSHIBA Password Utility function are different from the Windows password.

  • Page 136: Supervisor Password

    ■ If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held...

  • Page 137: Starting The Computer By Password

    Power Starting the computer by password If you have already registered a password, there are two ways to start the computer: ■ Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint System Boot Authentication.

  • Page 138: Panel Power On/Off

    Power Hot keys You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter Hibernation Mode - please refer to Chapter 5, The Keyboard for further details. Panel power on/off You can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it.

  • Page 139: Chapter 7 Hw Setup

    Accessing HW Setup To run the HW Setup program, click Start -> All Programs -> TOSHIBA -> Utilities -> HWSetup. HW Setup window The HW Setup window contains a number of tabs (General, Display, Boot Priority, Keyboard, CPU, LAN, Device Config, USB and Button Setting) to allow specific functions of the computer to be configured.

  • Page 140: Boot Priority

    HW Setup Setup This field displays the installed BIOS version and date. Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor. Power On Display This tab allows you to select the display to be used when the computer is started.
  • Page 141 HW Setup The computer looks for bootable files on devices CD-ROM -> LAN -> in the following order: 1. CD-ROM , 2. LAN, 3. FDD -> HDD floppy diskette drive , 4. hard disk drive. The computer looks for bootable files on devices CD-ROM ->...
  • Page 142 HW Setup 3. Use the left/right cursor keys to highlight the boot device you want and press ENTER. If a Supervisor Password has been set, manual boot device selection functions may be restricted. The boot device selection methods described above will not change the boot priority settings that have been configured in HW Setup.
  • Page 143 HW Setup USB Memory BIOS Support Type This option allows you to set the type of the USB memory to be used as a startup device. Sets the USB memory to be the equivalent of a hard disk drive (default). With this setting, the USB memory device can be used to start the computer as though it were a hard disk drive based on the hard disk drive settings within both...
  • Page 144 HW Setup The processor's power consumption and Always High automatic clock speed switching functions are disabled - in use the processor will always run at its highest level of power consumption and its highest speed. The processor's power consumption and Always Low automatic clock speed switching functions are disabled - in use the processor will always run at...

  • Page 145: Device Config

    HW Setup Device Config Device Configuration This option allows you to set how the computer's hardware devices will be configured. The computer's BIOS will setup and configure all All Devices devices. The operating system will setup and configure all Setup by OS of the devices that it can control (default).
  • Page 146 HW Setup However, the "USB Sleep and Charge function" may not work with certain external devices even if they are compliant with the USB specification. In those cases, turn the power of the computer ON to charge the device. ■ When "USB Sleep and Charge function"...
  • Page 147 HW Setup The default setting is [Disabled]. Changing the setting to [Enabled] enables the use of this function. There are two modes, Mode1 and Mode2 in [Enabled]. For normal use, set the setting to Mode1. If the function does not work with Mode1 setting, change it to Mode2. Some external devices may not be able to use this function in either mode.

  • Page 148: Chapter 8 Av Functions

    Chapter 8 AV functions This chapter explains how to use the AV functions. The state where Windows Vista is active is referred to as Windows mode. Media Center This section describes the Media Center. ■ You can record TV programs and pictures/movies from external input devices using the TV tuner.

  • Page 149: Front Operation Panel

    AV functions When the Media Center is going to be used, be sure that the computer is hooked up to an AC adaptor, and please use the AC power. If this is used under battery power, you are in danger of experiencing recording failures, sound fades, or frames being dropped from videos due to battery depletion.
  • Page 150 AV functions Next panel Touch this panel to move to the next audio track, DVD chapter or recorded data. Mute panel Turns your computer sound off. Illumination On/Off Touch this panel to switch the lighting of panel indicators (e.g. Front operation panel, power button, volume dial, etc).

  • Page 151: Remote Controller

    AV functions Remote controller A remote controller, which is provided with some models, enables you to perform some functions of your computer from a distant location. There are two different types of remote controllers: ■ Full size remote controller ■ Slim size remote controller ■...
  • Page 152 AV functions Full size remote controller Pause Play Access indicator Power Record Stop Rewind Fast Forward Replay Skip Back Start More info Arrows Mute Volume + Channel/Page Volume - Live TV Guide DVD Menu Recorded TV Numbers Enter Clear Figure 8-2 Full size remote controller User’s Manual...
  • Page 153 AV functions Pause Play Access indicator Power Record Stop Rewind Fast Forward Replay Skip Back Start More info Arrows Mute Volume + Channel/Page Volume - Live TV Guide DVD Menu Recorded TV Numbers Enter Clear Teletext Blue Yellow Green Figure 8-3 Full size remote controller User’s Manual...
  • Page 154 AV functions Power Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer. To change the setting, click Start, select Control panel ->...
  • Page 155 AV functions Selects the desired action or window option. It acts like the ENTER Key. If watching TV in full screen mode, pressing OK switches back to the previous viewed channel. Press again to toggle back. It acts the same way as a Jump button on some TV remote controls.

  • Page 156: Slim Size Remote Controller

    AV functions Red, Green, Yellow It jumps to a registration link. and Blue buttons These buttons are not provided with some models. Teletext Starts or terminates the Teletext mode. This button is not provided with some models. Slim size remote controller Brightness up Brightness down CD/DVD...
  • Page 157 AV functions Brightness down Decreases the computer's display panel brightness in individual steps. Brightness up Increases the computer's display panel brightness in individual steps. Power Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer.

  • Page 158: Using The Remote Controller

    AV functions FWD (Fast Forward) Moves the media (video, DVD, music, and so on) forwards. Replay Moves media backward (seven seconds for videos, one music track or one DVD chapter at a time). Stop Stops the media currently playing. Skip Moves media forward (30 seconds for videos, one music track or one DVD chapter).

  • Page 159: Installing/Removing Batteries

    AV functions Even if within the effective scope as described above, the remote control may malfunction or not work correctly in the following cases. ■ When an obstacle stands between the infrared receiver window of your computer and the remote controller. ■...

  • Page 160: Installing The Batteries

    AV functions Full size remote controller Type of battery that can be used for the Full size remote controller When the batteries shipped with the remote controller are discharged, replace them with commercially available AA manganese batteries or AA alkaline batteries. Other types or battery should not be used. Installing the batteries 1.

  • Page 161: Replacing The Batteries

    AV functions Replacing the batteries When the batteries in the Full size remote controller reach the end of their life, the Full size remote controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.

  • Page 162: Replacing The Battery

    AV functions 3. Close the battery cover. Close the cover securely until it clicks. Battery cover Figure 8-12 Closing the battery cover Replacing the battery 1. Open the battery cover on the back side of the remote controller. 2. Hold down the stopper and slide the battery out of battery case. Stopper Battery Figure 8-13 Removing the batteries...

  • Page 163: Set-Top Box Connection Method And Watching Tv On The Media Center

    AV functions Removing a Slim size remote controller To remove a Slim size remote controller, follow the steps as detailed below: 1. Press a Slim size remote controller slightly to make it stretch out. 2. Grasp a Slim size remote controller and pull it out from the slot. ExpressCard slot Slim size remote controller...

  • Page 164: Activating Media Center For The First Time

    AV functions 2. Connect the other end of the infrared transmitter cable to a set-top box. It is placed in front of the infrared receiver window on the set-top box to allow the Full size remote controller to be used to change channels. 3.

  • Page 165: Listen To Radio

    AV functions 3. The Set Up Your TV Signal window is displayed, and click Next. 4. Follow the screen instructions and configure settings according to the environment used. Image data cannot be imported, edited, watched or saved to DVD by connecting the Media Center model to external devices such as TV, video deck or analog video camera.

  • Page 166: Toshiba Dvd Player

    AV functions TOSHIBA DVD PLAYER Please be aware of the following limitations when you use the TOSHIBA DVD PLAYER: Notes on use ■ Frame dropping, audio skipping or out of synch audio and video may occur during playback of some DVD Video titles.
  • Page 167 Display Devices & Audio ■ "TOSHIBA DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start ->...
  • Page 168 TOSHIBA DVD PLAYER. Figure 8-18 Application selection screen 2. Touch the CD/DVD panel on the Front operation panel. Or select Start -> All Programs -> TOSHIBA DVD PLAYER -> TOSHIBA DVD PLAYER to start "TOSHIBA DVD PLAYER". Operating TOSHIBA DVD PLAYER Notes on Using "TOSHIBA DVD PLAYER".

  • Page 169: Qosmioengine

    AV functions Open TOSHIBA DVD PLAYER HELP TOSHIBA DVD PLAYER features and instructions are also explained in detail in "TOSHIBA DVD PLAYER Help". Use the following procedure to open "TOSHIBA DVD PLAYER Help". 1. Click the "Help" button ( ) in the Display Area.

  • Page 170: Chapter 9 Optional Devices

    Chapter 9 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes the connection or installation of the following devices: To connect optional devices (such as USB device or External monitor) to the computer, be sure to check the shape and orientation of the connector before connecting.

  • Page 171: Expresscard

    The computer is equipped with a single ExpressCard slot into which any ExpressCard device that meets industry standards, either manufactured by TOSHIBA or another vendor, can be installed. The slot supports hot plug connection and utilizes the PCI Express interface that supports the reading and writing of data at a theoretical maximum rate of 2.5Gbps.

  • Page 172: Bridge Media Slot

    Optional Devices Removing an ExpressCard To remove an ExpressCard, follow the steps as detailed below. 1. Open the Safely Remove Hardware icon on the Windows Taskbar. 2. Point to ExpressCard and click the left Touch Pad control button. 3. Grasp the ExpressCard and remove it. ExpressCard Figure 9-2 Removing the ExpressCard Press gently until the cover clicks into place.

  • Page 173: Memory Media

    Optional Devices ■ This Bridge media slot supports the following memory media. ■ Secure Digital (SD) Card (SD memory card, SDHC memory card, miniSD Card, microSD Card) ■ Memory Stick (Memory Stick, Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo) ■...

  • Page 174: Card Care

    SD/SDHC memory cards are sold already formatted in conformity to specific standards. If you format the SD/SDHC memory card again, be sure to format it with the TOSHIBA SD Memory Card Format utility, not with the format command provided within Windows.

  • Page 175: Memory Card Care

    Optional Devices Memory card care ■ Set the write-protect switch to the lock position, if you do not want to record data. ■ Memory cards have a limited lifespan, so it is important to backup important data. ■ Do not write to a card if the battery power is low. Low power could affect writing accuracy.

  • Page 176: Removing A Memory Media

    Optional Devices ■ Make sure memory media is oriented properly before you insert it. If you insert the media in wrong direction, you may not be able to remove ■ When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data.

  • Page 177: Additional Memory Module

    You can access the inserted memory modules efficiently in dual channel. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions.

  • Page 178: Installing A Memory Module

    Optional Devices Point to note about memory module error If you install a memory module that is not compatible with the computer, the Power indicator will flashes (on for 0.5 seconds, off for 0.5 seconds) in the following ways; ■ If there is an error in only Slot A or no memory module is inserted in Slot A: repeatedly flashes orange twice, then white.
  • Page 179 Optional Devices 7. Align the notch of the memory module with that of the memory module slot and gently insert the module into the slot at about a 45 degree angle before holding it down until the latches on either side snap into place.

  • Page 180: Removing A Memory Module

    Optional Devices 8. Seat the memory module cover in place and secure it with one screw. Take care to ensure that the memory module cover is firmly closed. Screw Memory module cover Figure 9-8 Seating the memory module cover 9. Install the battery pack - refer to Replacing the battery pack section in Chapter 6, Power, if required.

  • Page 181: Battery Packs

    Optional Devices 8. Grasp the memory module by its edges and remove it from the computer. ■ If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them.Or you will get burnt if you touch any of them.

  • Page 182: Battery Charger

    Optional Devices Battery Charger The battery charger provides a convenient way to charge up to two Lithium Ion battery packs without requiring the use of your computer. The computer is equipped with the Universal Serial Bus ports that can accommodate some kinds of devices. These ports comply with the USB 2.0 standard.
  • Page 183 Optional Devices Check the Disk-In-Use indicator when you use the floppy diskette drive. Do not press the eject button or turn off the computer while the light is glowing. Doing so could destroy data and damage the floppy diskette or the drive.

  • Page 184: Esata (External Serial Ata)

    Optional Devices Disconnecting the USB floppy diskette drive When you have finished using the USB floppy diskette drive, you can follow the procedures below in order to disconnect it: 1. Wait for the Disk-In-Use Indicator light to go out to make sure all floppy diskette activity has stopped.

  • Page 185: External Monitor

    Optional Devices ■ A connected eSATA device may not be recognized if it is connected to the computer's eSATA/USB combo port while the computer is in Sleep Mode or Hibernation Mode. If this occurs, disconnect the eSATA device and then reconnect the device while the computer is turned on. ■...

  • Page 186: Hdmi

    Optional Devices 4. Turn the computer's power on. When you turn on the power, the computer will automatically recognize the monitor and determine whether it is a color or monochrome device. In the event that you find that there are issues getting an image displayed on the correct monitor, you should consider using the FN + F5 hot key to change the display settings (if you then disconnect the external monitor before you turn the computer's power off, be sure to press FN + F5 hot key again to...

  • Page 187: Settings For Display Video On Hdmi

    Optional Devices Settings for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed. ■ Be sure to use the FN + F5 HotKey to select the display device before starting to play video.

  • Page 188: I.link (Ieee1394)

    Optional Devices Some models are supported with the REGZA Link (PC Control). Using REGZA Link (PC Control) Toshiba notebooks with REGZA Link (PC Control) include a Toshiba utility dedicated to take advantage of its capabilities which can allow you to: ■...
  • Page 189 Optional Devices ■ Make sure data transfer has ended or turn off the computer, before you: ■ Connect/disconnect an i.LINK device to/from the computer. ■ Connect/disconnect an i.LINK device to/from another i.LINK device that is connected to the computer. Connecting the i.LINK (IEEE1394) cable To connect the i.LINK (IEEE1394) cable, follow the steps as detailed below: In order to use the computer's i.LINK (IEEE1394) port, open the left side...

  • Page 190: Security Lock

    Optional Devices Disconnecting the i.LINK (IEEE1394) cable To disconnect the i.LINK (IEEE1394) cable, follow the steps as detailed below: 1. Open the Safely Remove Hardware icon on the Windows Taskbar. 2. Point to i.LINK (IEEE1394) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. ■...

  • Page 191: Chapter 10 Troubleshooting

    Chapter 10 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.

  • Page 192: Preliminary Checklist

    Troubleshooting Preliminary checklist You should always consider the simplest solution first - the items detailed in this checklist are easy to fix and yet can cause what appears to be a serious problem: ■ Make sure you turn on all peripheral devices before you turn on the computer - this includes your printer and any other external device you are using.

  • Page 193: Hardware And System Checklist

    Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.

  • Page 194: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Priority option is set within the TOSHIBA HW Setup program. If any of the following conditions are present, the self test has failed: ■...

  • Page 195: Overheating Power Down

    Troubleshooting Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer will automatically shuts down to prevent any damage - in this instance all unsaved data in memory will be lost. Problem Procedure Computer shuts down Leave the computer off until the DC IN indicator and DC IN indicator...
  • Page 196 Troubleshooting Battery If you suspect a problem with the battery, you should check the status of the DC IN indicator as well as the Battery indicator. Please refer to Chapter Power for more information on these indicators, together with general battery operation.

  • Page 197: Real Time Clock

    Password Problem Procedure Cannot enter Please refer to the TOSHIBA Password Utility password section in Chapter 6, Power for further information. Keyboard Keyboard problems can be caused by the setup and configuration of the...

  • Page 198: Hard Disk Drive

    Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 199: Dvd Super Multi Drive

    Troubleshooting Problem Procedure Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the disk Defragmentation utility to check the condition of your files and the hard disk drive. Please refer to the operating system's documentation or online Help File for further information on operating and using the Defragmentation utility.

  • Page 200: Usb Floppy Diskette Drive

    Troubleshooting Problem Procedure Check the type of CD/DVD you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video CD-ROM: CD-DA, CD-Text, Photo CD (single/multi-session), CD-ROM Mode 1, Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD-EXTRA), Addressing Method 2 Recordable DVD: DVD-R/-R DL, DVD+R/+R DL, DVD-RW, DVD+RW, DVD-RAM Check the region code on the DVD.
  • Page 201 Troubleshooting ExpressCard For further information, please refer to Chapter 9, Optional Devices. Problem Procedure ExpressCard error Remove the ExpressCard from the computer and occurs then reinsert it in order to ensure it is firmly connected. In the event that the ExpressCard is attached to an external peripheral device, ensure that this connection is properly made.

  • Page 202: Xd Picture Card

    Troubleshooting Memory Stick/Memory Stick Duo/Memory Stick PRO/Memory Stick PRO Duo For further information, please refer to Chapter 9, Optional Devices. Problem Procedure Memory Stick/Memory Remove the Memory Stick/Memory Stick Stick Duo/Memory Duo/Memory Stick PRO/Memory Stick PRO Duo Stick PRO/Memory from the computer and then reinsert it in order to Stick PRO Duo error ensure it is firmly connected.

  • Page 203: Infrared Receiver Window

    Troubleshooting MultiMediaCard For further information, please refer to Chapter 9, Optional Devices. Problem Procedure MultiMediaCard error Remove the MultiMediaCard from the computer occurs and then reinsert it in order to ensure it is firmly connected. If the problem persists, then you should refer to the documentation supplied with your MultiMediaCard for further information.
  • Page 204 Troubleshooting Problem Procedure Double-tapping does In this instance, you should initially try changing not work the double-click speed setting within the Mouse Control utility. 1. To access this utility, click Start -> Control Panel -> Hardware and Sound -> Mouse icon.

  • Page 205: Usb Mouse

    Troubleshooting USB mouse Problem Procedure On-screen pointer In this instance the system might be busy - Try moving the mouse again after waiting a short does not respond to while. mouse operation Remove the mouse from the computer and then reconnect it to a free USB port it in order to ensure it is firmly attached.

  • Page 206: Fingerprint Sensor

    USB, you are still able to use a USB mouse and/or USB keyboard by setting the USB KB/Mouse Emulation option within the TOSHIBA HW Setup utility to Enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 207: Usb Sleep And Charge Function

    Troubleshooting USB Sleep and Charge function For more information and settings, please refer to the USB Sleep and Charge section in Chapter 7, HW Setup. Problem Procedure I cannot use the "USB The setting of "USB Sleep and Charge function" Sleep and Charge may be [Disabled].

  • Page 208: Esata Device

    Troubleshooting Problem Procedure External devices Some external devices may not work when connected to the connected to a compatible port when the "USB compatible ports do not Sleep and Charge function" is [Enabled]. work when connected Reconnect the external device after turning ON to a compatible port.
  • Page 209 Troubleshooting Additional memory module Please also refer to Chapter 9, Optional Devices, for further information on installing and removing memory modules. Problem Procedure If there is a memory In the event the Power indicator flashes when malfunction, the Power the computer is turned on, you should first check indicator will repeatedly that the installed memory module(s) are flash (on for 0.5...

  • Page 210: Volume Control Dial

    Troubleshooting Problem Procedure Check to make sure the headphone connection is secure. Check within the Windows Device Manager application to ensure the sound device is enabled and that the device is properly working. For further information, please refer to "Troubleshooting in Windows" section of Windows Help and Support.
  • Page 211 Troubleshooting External monitor Please also refer to Chapter 9, Optional Devices, and to the documentation supplied with your monitor for further information. Problem Procedure Monitor does not turn After confirming that the monitor's power switch is on, you should check the connections to make sure that the power cord/adaptor is firmly connected to the monitor and to a working power outlet.
  • Page 212 Troubleshooting Modem ■ This information is applicable to the models equipped with a built-in modem. ■ Some models are equipped with a modem jack or FM antenna port. Problem Procedure Communication Make sure the computer's internal modem software can’t initialize settings are correct - please refer to the Phone modem and Modem Options link within the Windows...

  • Page 213: Wireless Lan

    Troubleshooting Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub. Wake-up on LAN does Make sure the AC adaptor is connected. The not work Wake-up on LAN function consumes power even when the system is off.

  • Page 214: Hdmi Monitor Output Function

    Troubleshooting HDMI monitor output function Problem Procedure No display Try adjusting the contrast and brightness controls on the television. Press the FN + F5 hot key in order to change the display priority and ensure that it is not set for the internal display panel only.

  • Page 215: Video Playback

    Recovery Discs section in Chapter3, Getting Started. You will be directed to select "Restore Original Factory Image" from the drop-down menu. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. User’s Manual 10-25...

  • Page 216: Toshiba Support

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call...
  • Page 217 Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia Germany & Austria TOSHIBA Australia Pty. Ltd.

  • Page 218: Chapter 11 Legal Footnotes

    Chapter 11 Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.

  • Page 219: Memory (Main System)*2

    Read additional restrictions under "Environmental Conditions" in your computer documentation. Contact Toshiba Technical Service and Support for more information. 64-Bit Computing 64-bit processors are designed to take advantage of 32 and 64 bit computing.

  • Page 220: Battery Life*3

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 221: Wireless Lan*7

    Legal Footnotes Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.

  • Page 222: Safety Use For Tv Tuner*13

    Legal Footnotes Safety Use for TV Tuner If you have to operate your computer during a thunderstorm and are connecting the TV tuner to an outside antenna, you should operate your computer using AC power mode. The AC adaptor offers some protection against (but does not entirely prevent) possible electric shock caused by lightning.

  • Page 223: Appendix A Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Refer to User’s Manual about Size. Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% (noncondensing) Non-operating -20°C (-4°F) to 65°C (149°F) 10% to 90% (noncondensing) Wet-bulb 26°C maximum...

  • Page 224: Power Requirements

    Specifications Power Requirements AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 19 VDC 6.32 amperes Built-in Modem This information is applicable to the models equipped with a built-in modem. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing...
  • Page 225 Specifications Communication Data transmission and reception speed 300/1200/2400/4800/7200/9600/12000/14400/16 800/19200/21600/24000/26400/28800/31200/33 600 bps Data reception only with V.90 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/ 56000 bps 2400/4800/7200/9600/12000/14400 bps Transmitting level -10 dBm Receiving level -10 to -40 dBm Input/output 600 ohms ±30% impedance Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.42bis...

  • Page 226: Display Controller And Video Mode

    Appendix B Display Controller and Video mode Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Due to the display panel's increased resolution, lines may appear broken in when displaying images in full-screen text mode. The display controller also controls the video mode and uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed at any one time.

  • Page 227: Wireless Lan

    Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor PCI Express Mini Card ■ IEEE 802.11 Standard for Wireless LANs Compatibility ■...

  • Page 228: Radio Characteristics

    Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN modules may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.

  • Page 229: Supported Frequency Sub-Bands

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN module may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 230 Wireless LAN ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN module will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.
  • Page 231 Wireless LAN 5660* 5680* 5700* 5745* 5765* 5785* 5805* 5825* * The approved channels on using are different at each country or region. When using these channels in any country or region, refer to the addendum sheet which is Approved Countries/Regions for use. The channel configuration is managed as follows: ■...

  • Page 232: Appendix D Bluetooth Wireless Technology Interoperability

    Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special interest Group. ■ When you use Bluetooth Adaptor from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth Adaptor from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz...

  • Page 233: Bluetooth Wireless Technology And Your Health

    Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 234 The radiated output power of the Bluetooth Adaptor from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Adaptor from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.

  • Page 235: Using Bluetooth Adaptor From Toshiba Equipment In Japan

    3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.

  • Page 236: Device Authorization

    (3) 1: The interference range of this equipment is less than 10 m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday - Friday : 10:00-17:00 Toll Free Tel : 0120-15-1048...

  • Page 237: Ac Power Cord And Connectors

    Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 238 AC Power Cord and Connectors Finland: FIMKO Sweden: SEMKO France: LCIE Switzerland: Germany: United Kingdom: In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2- 15P (250V) or 1-15P (125V) and three pin plug configuration must be 6- 15P (250V) or 5-15P (125V) as designated in the U.S.

  • Page 239: Appendix F Usage Restrictions

    This configuration is designed to work with a signal from a conventional (standard or analog) TV antenna. ■ TOSHIBA does not guarantee that signals received by satellite or cable TV receivers will work properly and does not provide technical support for them.
  • Page 240 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface ASCII: American Standard Code for Information Interchange BIOS: basic input/output system bps: bits per second CD: compact disc...
  • Page 241 Glossary IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect...
  • Page 242 Glossary analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
  • Page 243 Glossary byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. cache memory: A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer's main memory.
  • Page 244 Glossary components: Elements or parts (of a system) which make up the whole (system). Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result.
  • Page 245 Glossary Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk.
  • Page 246 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 247 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 248 Glossary IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps. K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte.
  • Page 249 Glossary menu: A software interface that displays a list of options on the screen. Also called a screen. microprocessor: A hardware component contained in a single integrated circuit that carries out instructions. Also called the central processing unit (CPU), one of the main parts of the computer. mode: A method of operation, for example, the Shut Down Mode, Sleep Mode or the Hibernation Mode.
  • Page 250 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. program: A set of instructions a computer can execute that enables it to achieve a desired result.
  • Page 251 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): Volatile memory that can be written to as well as read.
  • Page 252 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. USB: Universal Serial Bus. This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
  • Page 253 Glossary warm start: Restarting or resetting a computer without turning it off. Wi-Fi: A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
  • Page 254 9-3 location 2-8 problems 10-16 using 4-2 Cache memory 1-3 FM tuner 4-36 Cleaning the computer 4-42 antenna port 2-5 Cooling vents 2-6 problems 10-26 FN + 1 (TOSHIBA Zooming Utility reduce) DC IN indicator 2-11, 6-3 User’s Manual Index-1...
  • Page 255 Qosmio G50 Series FN + 2 (TOSHIBA Zooming Utility enlarge) LAN 7-6 USB 7-7 FN + ESC (Mute) 5-2 window 7-1 FN + F1 (Lock) 5-2 FN + F2 (Power Plan) 5-2 i.LINK 1-8, 2-3, 9-19 FN + F3 (Sleep) 5-3...
  • Page 256 Qosmio G50 Series removing 9-11 AC power 10-5 Memory Stick/Memory Stick Duo/Memory Additional memory module 10-19 Stick PRO/Memory Stick PRO Duo Analyzing the problem 10-2 care 9-5 Battery 10-6 inserting 9-6 Bluetooth 10-23 problems 10-12 DVD Super Multi drive 10-9...
  • Page 257 Volume control dial 2-11 TOSHIBA Assist 1-17 TOSHIBA ConfigFree 1-17 TOSHIBA Disc Creator 1-17, 4-23 TOSHIBA PC Diagnostic Tool 1-14 TOSHIBA SD Memory Card Format 1-19 TOSHIBA support 10-26 TOSHIBA Zooming Utility 1-14 Touch Pad 1-7 location 2-8 using 4-1 TV Tuner 1-9, 4-29 User’s Manual...

Table of Contents