4.14 Touch pad/Fingerprint sensor board/LED board
7. Remove the following screws and separate the LED board and touch pad plate.
8. Remove the following screw and separate the LED board and plate.
M2.5x2.8B FLAT HEAD
QOSMIO G50 Maintenance Manual (960-683)
Downloaded from LpManual.com Manuals
• M2.5×2.8B
FLAT HEAD screw
• M2.5×2.8B
FLAT HEAD screw
LED board
Plate
Figure 4-29 Removing the LED board
4 Replacement Procedures
×2
×1
Touch pad plate
[CONFIDENTIAL]
4-45