Oki OKIFAX 5900 User Handbook Manual page 77

you with more information about this service, which usually
has an additional charge.) To use this function, refer below to
Setting Distinctive Ring. Available settings are OFF (not
detected) ON (detected) and SET (programmed).
!
You must have your local telephone carrier's Distinctive
Ring service.
!
Your fax machine must be in FAX or PC answer mode,
and the PBX dial parameter must be set to OFF. Other
modes—TEL, TEL/FAX, or TAD—will override
Distinctive Ring.
!
This feature may not work properly if you have a
telephone other than a genuine Oki optional handset
connected to your fax machine.
Setting Distinctive Ring
To set up your fax machine to recognize another ring pattern:
1 Press the Menu/Exit key to enter the menu.
2 Enter speed access number 67.
3 When the display shows the parameter you want, press
or to select the setting, press Enter.
4 Press Menu/Exit to return to standby mode.
Memory Password
Speed access no. 04
This is a 4-digit numeric password used when the machine is
operating in the Memory Only Reception Mode (MEM).
Persons who don't know the password cannot make changes
to or print memory data when the machine is in this mode.
You can only registration one password.
To set memory password:
1 Press Menu/Exit to enter menu.
2 Enter speed dial access no. 04, wait.
3 Enter 4-digit numeric password (0000-9999) using
numeric keypad, press Enter.
4 Press Menu/Exit to return to standby mode.
To cancel a registered password:
1 Press Menu/Exit to enter menu.
2 Enter speed dial access no. 04, wait.
3 Enter 4-digit numeric password (0000-9999) using
numeric keypad, press Enter.
4 If the password matches the registered number, Password
Close? displays. If numbers do not match, Invalid
Password displays.
|
Handbook 69