Programming One-Touch And 2 Or 3 Digit Speed Dial Numbers - Oki OKIFAX 5900 User Handbook Manual

Programming One-Touch and 2 or 3 Digit Speed Dial Numbers

To begin programming your speed dial numbers, follow these instructions.
Collect Information
Gather the following information for each Speed Dial number you want to store:
Entry
1 Name
2 Primary telephone number (LOC#)
3 Alternate telephone number (ALT#)
4 Communications speed
5 Echo protection state
Parameters
Can be up to 15 characters
Up to 40 characters
Up to 40 characters
33.6K, 28.8K, 14.4K, 9.6K, 4.8K
ON or OFF
Explanation
Use letters, number or symbols.
This is the main number.
If the main number is busy or does not answer,
the machine will automatically dial this
alternate number.
33.6K is the default setting. If the machine you
are communicating with is an older machine,
try adjusting the speed to a lower setting.
If you are experiencing problems
communicating with a remote location in a
very noisy telephone area, or with an overseas
location, set Echo Protection to On for the
one-touch key assigned to that location.
|
Handbook 39