Oki OKIFAX 5900 User Handbook Manual page 64

To send a delayed batch fax (One Session):
1 Load the document(s).
2 Press Menu/Exit key to enter the menu.
to select Delayed Batch TX, press Enter .
3 Press
4 Enter the Speed Dial number of the desired location using
the assigned One Touch key or the numeric keypad. Press
Enter.
5 Location and transmission time set displays. Press Start.
6 The machine scans the document(s) into memory, and
waits until the time programmed to begin transmission.
7 Repeat above steps 1-7 to prepare multiple sessions.
!
Only locations programmed into Speed Dial numbers
31-40 are applicable.
!
Enter times following the 24-hour format. For example,
0800 is 8:00AM, 2000 is 8:00PM.
!
There is no limitation to the number of batch
transmission sessions to set using Speed Dial numbers
31-40; however, no more sessions will be accepted once
memory is filled.
|
56 Handbook
Canceling Delayed Transmissions
Follow the instructions provided below to cancel a delayed
transmission before it has been sent.
1 Press Stop.
2 The display shows Cancel Communication.
3 The display shows Location ID or Tel. No. of the delayed
transmissions currently programmed in the machine.
4 Press or to select transmission to cancel. Press
Enter.
5 The Location ID and Tel. No. of the selected transmission
will display. After confirmation, press Clear.
6 Selected transmission will be canceled.
7 For a delayed transmission from the document tray, press
Stop again to remove the document.
8 Press Menu/Exit to return to standby mode.