Resetting The Drum Counter; Cleaning The Scanner Path - Oki OKIFAX 5900 User Handbook Manual

5 Insert the new drum cartridge. Press down firmly on both
ends to lock the drum in place.
6 Lift out the toner well cover and discard.
7 Install a new toner cartridge. Follow steps in "Replacing
the Toner Cartridge" in this section.

Resetting the Drum Counter

Use this function to reset the drum counter when you replace
the image drum and to clear the CHANGE DRUM message.
To reset the image drum counter:
1 Press Menu/Exit to enter the menu.
until the > symbol is beside COUNTER.
2 Press
3 Press Enter twice.
4 Press Clear twice.
5 Press Menu/Exit to return to standby mode.

Cleaning the Scanner Path

To ensure the best possible scanning quality, paper lint and
dust should be cleaned from the area around the contact
image sensor (a) periodically. Open the control panel and
gently wipe off the area over the scanner.
a
|
Handbook 83