Table of Contents
Advertisement
Interfaces
NO.
ITEM
1
Power jack
2
Power button
3
USB 2.0 (3G/4G modem)
4
WPS/Reset button
5
LAN 1–4
6
WAN
7
Telephone
NetComm Wireless AC1200 WiFi Gigabit Router with Voice
10
Figure 2 - Interfaces
Connection point for the included power adapter. Connect the power supply here.
Turns the router on or off.
Connect a compatible 3G/4G USB modem here.
Activate the WiFi WPS PBC function.
a) Hold for 1-3 seconds then release to trigger the 2.4GHz WPS PBC
b) Hold for 4-6 seconds then release to trigger the 5GHz WPS PBC
c) Hold for 15 seconds then release to reset the router to factory default settings.
Gigabit Ethernet LAN ports. Connect your Ethernet based devices to one of these ports for high-speed
internet access.
Gigabit WAN port for connection to a WAN network.
Phone port for a standard PSTN analogue telephone handset. Connect a phone to this port to make use
of a VoIP service.
Table 4 – Interfaces
DESCRIPTION
www.netcommwireless.com
UM-00013 v1.0
Hide quick links:
Advertisement
Table of Contents
