Pptp Client - NetComm NF13ACV User Manual

OPTION
VPN-L2TP server
Server virtual IP
IP pool start address
IP pool end address
Authentication protocol
MPPE encryption mode
NAT
Encryption length

PPTP client

The Point-to-Point Tunnelling Protocol (PPTP) is a method for implementing virtual private networks using a TCP and GRE tunnel to
encapsulate PPP packets. PPTP operates on Layer 2 of the OSI model and is included on Windows computers.
When you have selected the PPTP client options, click the Edit button to enter authentication details.
NetComm Wireless AC1200 WiFi Gigabit Router with Voice
40
Enables/disables the L2TP server.
Specifies the L2TP server network IP address.
Specifies the start of the IP pool address range to assign to clients.
Specifies the end of the IP pool address range to assign to clients.
Select the Authentication protocols to use. Options are PAP, CHAP, MS_CHAP and MS_CHAPv2.
Enables/disables the Microsoft Point-to-Point Encryption protocol.
Enables/disables network address translation on the L2TP server network.
Selects the level of encryption applied to the tunnel.
Table 13 - L2TP server
Figure 36 - PPTP client
DEFINITION
www.netcommwireless.com
UM-00013 v1.0