Table of Contents
Advertisement
Interfaces
The following interfaces are available on the NWL-15 router:
ITEM
RJ45 Ethernet port
Reset button
Six-way terminal
Main antenna socket
Auxiliary antenna socket
Mini USB 2.0 OTG port
Serial port
GPS antenna socket
www.netcommwireless.com
Figure 4 - Interfaces
DESCRIPTION
Connect one or several devices via a network switch here.
Press and hold for less than 5 seconds to reboot to normal mode.
Press and hold for 5 to 15 seconds to reboot to recovery mode.
Press and hold for 15 to 20 seconds to reset the router to factory default settings.
Connect power source, ignition and I/O wires here. Power, ignition and I/O wires may be
terminated on the supplied terminal block and connected to a power source. Refer to
the diagram and table under the
Powering the router
terminal block. Operates in the 8-40V DC range.
SMA female connector for main antenna.
SMA female connector for auxiliary antenna (receive diversity).
Provides connectivity for optional external storage or a USB Ethernet dongle. Supplies
up to 0.5A to connected device.
Female DB9 port supporting 9-wire RS-232, RS-485 or RS-422 (software selectable).
SMA female connector for an active GPS antenna.
Table 6 – Interfaces
NetComm Wireless Light Industrial M2M Router Plus
section for correct wiring of the
11
Advertisement
Table of Contents
