Table of Contents
Advertisement
Interfaces
NTC-6200-01, NTC-6200-02, NTC-6200-11 and NTC-6200-12 models
NO.
ITEM
1
Main antenna socket
2
Aux antenna socket
3
GPS antenna socket
4
Six-way terminal block connector
5
Reset button
6
SIM card slot
7
SIM tray eject button
8
Torx screw hole
9
RJ45 PoE Ethernet port
10
Mini USB 2.0 OTG port
11
Serial port
www.netcommwireless.com
2
10
3
8
1
6
7
Figure 4 - Interfaces - NTC-6200-01, NTC-6200-02, NTC-6200-11 and NTC-6200-12 models
SMA female connector for main antenna.
SMA female connector for auxiliary antenna (receive diversity).
SMA female connector for an active GPS antenna.
Connect power source, ignition and I/O wires here. Power, ignition and I/O wires may be terminated on
the supplied terminal block and connected to a power source. Refer to the diagram and table under the
Installation
section for correct wiring of the terminal block. Operates in the 8-40V DC range.
Press and hold for less than 5 seconds to reboot to normal mode.
Press and hold for 5 to 15 seconds to reboot to recovery mode.
Press and hold for 15 to 20 seconds to reset the router to factory default settings.
Insert SIM card here.
Press to eject the SIM tray
If desired, place the SIM tray cover over the SIM card slot and fix it to the router's body using the included
Torx screw.
Connect one or several devices via a network switch here. This port can also optionally receive Power
over Ethernet (802.3af PoE) in which case the DC power supply can serve as a backup power source if
required. (PoE available on NTC-6200-01 and NTC-6200-11 only).
Provides connectivity for optional external storage or a USB Ethernet dongle. Supplies up to 0.5A to
connected device.
Female DE-9 port supporting 9-wire RS-232, RS-485 or RS-422 (software selectable).
Table 6 – Interfaces - NTC-6200-01, NTC-6200-02, NTC-6200-11 and NTC-6200-12 models
11
1
5
4
9
DESCRIPTION
NetComm Wireless 3G M2M Router / Plus
11
Advertisement
Table of Contents
