Appendix B: Default Settings; Restoring Factory Default Settings - NetComm NF13ACV User Manual

Appendix B: Default Settings

The following tables list the default settings for the NF13ACV router.

Restoring factory default settings

Restoring factory defaults will reset the NF13ACV router to its factory default configuration. You may encounter a situation where
you need to restore the factory defaults on your NF13ACV router such as:
You have lost your username and password and are unable to login to the web configuration page;
You are asked to perform a factory reset by support staff.
You have completed a firmware upgrade.
There are two methods you can use to restore factory default settings on your NF13ACV router:
Using the web-based user interface
Using the reset button on the interface panel of the router
Using the web-based user interface
To restore your router to its factory default settings, please follow these steps:
Open a browser window and navigate to the IP address of the router (default address is http://192.168.20.1). Login to the
router using admin as the User Name and admin as the password.
Click the System item from the top menu bar, then System configuration on the left menu and then click Device
configuration.
Under the Restore factory defaults section, click the Restore defaults button. The router asks you to confirm that you wish
to restore factory defaults. Click OK to continue. The router sets all settings to default. Click OK again to reboot the router.
When the Power light returns to a steady blue the reset is complete. The default settings are now restored.
Using the reset button on the interface panel of the router
Press the WPS/Reset button on the device for more than 15 seconds. The router will restore the factory default settings and reboot.
When you have reset your NF13ACV router to its default settings you will be able to access the device's configuration web interface
using http://192.168.20.1 with username admin and password admin.
NetComm Wireless AC1200 WiFi Gigabit Router with Voice
68
LAN (MANAGEMENT)
Static IP Address: 192.168.20.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.20.1
Table 29 - LAN Management Default Settings
ADMIN MANAGER ACCOUNT
Username: admin
Password: admin
Table 30 - Web Interface Default Settings
www.netcommwireless.com
UM-00013 v1.0