Domain Filtering - NetComm NF13ACV User Manual

To use MAC filtering:
Select the Whitelist or Blacklist option. If Whitelist is selected, only the listed devices will be granted access to the network.
If Blacklist is selected, all devices are granted network access except the devices listed below.
Add the MAC addresses one at a time in the MAC Address List fields. The MAC addresses must be entered with a colon
character separating the hexadecimal character pairs, e.g. 01:23:45:67:89:AB.
Click the Activate toggle key so that it is in the ON position for the devices to which you would like MAC filtering to apply.
To enable the MAC address filtering function, click the global Activate toggle key at the top of the page so that it is in the
ON position.
Click the Save button to save the configuration.

Domain filtering

The Domain filtering feature is provided to allow the administrator to block access to particular domain names from all devices
(except those in the privileged range).
To access the Domain filtering page, click on the Networking menu at the top of the screen, click on the Routing menu on the left,
then click on the Domain filtering menu item.
To configure a list of domains to be filtered:
Enter the domain suffixes in the Domain Suffix fields, for example, domainname.com.au.
In the Action column, check the items that you want to apply when the domain is accessed. The "Drop" action denies
access to the domain while the "Log" action logs the request to the System log file.
Click the Activate toggle key next to the rule so that it is in the ON position.
To enable the Domain filter globally, click the Activate toggle key at the top of the page so that it is in the ON position.
If you want to log DNS queries to the listed domains, click the Log DNS query toggle key so that it is in the ON position.
Click the Save button.
www.netcommwireless.com
UM-00013 v1.0
Figure 23 - Domain filtering
NetComm Wireless AC1200 WiFi Gigabit Router with Voice
31