NetComm NF13ACV User Manual page 58

Caller ID
The Caller ID page enables you to configure whether your Caller ID is sent when receiving an inbound call (If supported by your VoIP
service and your PSTN handset).
Click Save to save your settings or Undo to discard the settings entered.
Flash time
The Flash time page enables you to configure the minimum and maximum time a hook flash signal can occur for the router to
recognise it.
This setting should not need to be changed unless directed to do so. Click Save to save your settings or Undo to discard the
settings entered.
Call waiting
The Call Waiting page enables you to use call waiting with your VoIP service (If supported by your VoIP service).
OPTION
Option
Click Save to save your settings or Undo to discard the settings entered.
NetComm Wireless AC1200 WiFi Gigabit Router with Voice
58
Figure 59 - Caller ID
OPTION DEFINITION
Caller ID Select whether to show or hide the caller ID.
Table 24 - Caller ID
Figure 60 - Flash time setting
Figure 61 - Call waiting
Select to Enable or Disable the call waiting feature on the router.
Table 25 - Call waiting
DEFINITION
www.netcommwireless.com
UM-00013 v1.0