Chapter 6: Engineering Mode; Engineering Mode Overview - Matrix E7XE-01 Service Manual

cHaptEr 6: EnginEEring ModE

6.1 EnginEEring ModE oVErViEw

The Engineering Mode allows the club owner to keep track of the technical settings and error history for the Elliptical Trainer.
1) To enter Engineering Mode, press ENTER, 2, 0, 0, 1, ENTER on the lower display. Engineering Mode will appear on the display (Figure A).
2) Follow the prompts to change the desired setting.
3) Press the ENTER key once the desired setting is correct to save.
4) Press HOME to return to normal operation.
figUrE a
16