Chapter 6: Engineering Mode; Engineering Mode Overview; Engineering Mode - Errors Tab - Matrix E 7 X - 0 3 Service Manual

6.1 ENGINEERING MODE OVERVIEW

The Engineering Mode allows the club owner to keep track of the technical settings and error history for the Suspension Elliptical.
1) To enter Engineering Mode, press ENTER, 2, 0, 0, 1, ENTER on the upper display. Engineering Mode will appear on the display (Figure A).
2) Select the key next to the setting that needs to be changed, and follow the prompts to change.
3) Press the ENTER key once the desired setting is correct to save.
4) Press HOME or press and hold the STOP key for 3-5 seconds to return to normal operation. NOTE: If a setting has been changed, the unit
and console power should be reset. Cycle the power switch, and press and hold the CHANNEL UP and CHANNEL DOWN keys for 3-5 sec-
onds to reset the console power.

6.2 ENGINEERING MODE - ERRORS TAB

ENGINEERING MODE
Errors

CHAPTER 6: ENGINEERING MODE

FIGURE A
FUNCTION & DEFAULTS DESCRIPTIONS
This option displays the error code
history.
MODIFIED
N/A
15