Matrix E7XE-01 Service Manual page 70

cHaptEr 9: part rEplacEMEnt gUidE
9.20 rollEr track rEplacEMEnt - continUEd
5) Remove the 3 screws holding the top roller track in place (Figure H).
figUrE H
6) Move the crank arm to the side off of the roller track.
7) Remove the 3 screws holding the bottom roller track to the frame (Figure I) and remove the roller track (Figure J).
figUrE i figUrE j
8) Reverse Steps 1-7 to install a new roller.
9) Test the Elliptical Trainer for function as outlined in Section 8.21.
66