Chapter 6: Engineering Mode; Engineering Mode Overview - Matrix E5X-04 Service Manual

6.1 uSing EnginEERing ModE
To enter Engineering Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager Mode appears on the middle LED display.
Press the LEVEL UP or DOWN key to scroll to Engineering Mode. Press ENTER to go into Engineering Mode.
codE dEfault
Disable Errors No
Speed Units Mile
Machine Type E5x-03
Power Save Time 30 Seconds
Pause Time 30 Seconds
Serial Number N/A
Club ID N/A
ErP Mode (Sleep Off
Time)
Audio Source Off
Volume Control TV/ PCTV:
Output:13
REMOTE TV
Output:13
REMOTE TV
Input:15
AM System RF Radio

cHaptER 6: EnginEERing ModE

optionS dEScRiption
Yes or No No - Shows A-C class error codes. Yes - Shows only C class error codes.
Mile or Kilometer Set for Mile or Kilometer.
H5x, R5x, U5x, E5x-02 Frame - Old EP frame.
E5x-02 or E5x-03 E5x-03 Frame - Suspension Elliptical (current)
30-60 Seconds Power saving time for the self powered frame.
15 - 120 Seconds For non self powered frames only. Not used on this model.
N/A Serial Number input is available for both the Console and Frame. Use the number
keys and UP / DOWN LEVEL keys to enter Engineering Mode. Due to the limited
LED characters, 2 layers are used to enter the serial number. First Layer:
- PPPPP V
- PPPPP is the product name.
- V is the version. If the version is A, just leave this blank.
Second Layer
- YY MM nnnnn.
- YY is the year (11, 12).
- MM is the month (e.g. 08, 09, 10).
- nnnnn is the actual serial number.
Use the UP / DOWN LEVEL keys to navigate the layers and the number keys to
input the serial number. The product name is dependent on the Machne Type
setting.
For example, the console is EP612 with ver. B with ver. A and the manufactured
date is 2011.08 with 98765. The frame is EP304 with ver. A and the manufactured
date is 2011.06 with 12345. Their serial numbers are:
Console SN: EP612B 1st layer, 110898765 2nd layer.
Frame SN: EP304 1st layer, 110612345 2nd layer.
N/A This sets the club ID for clubs using Asset Management.
Off or On (1-30 If there is no use of the machine over a period of time, the console LEDs will turn
Minutes) off (go into ErP mode).
Off / TV / PC TV / Manual setting that that sets which outside TV will have audio through the console
Remote TV audio ports.
1~ 32 Controls the default TV volume for entertainment wired through the C-Safe port.
a. Input Default (DF : 15 / Range : 1 ~ 15)
b. Max Default (DF : 32 / Range : 1 ~ 32)
1~ 32
c. Output Default (DF : 13 / Range : 1 ~ Max)
Remote TV support a / b / c item. TV and PCTV only support c item.
1~ 15
WIFI/RF Radio To select AM output device by WIFI or RF Radio.
13