Foot Pedals Replacement - Matrix E7XE-01 Service Manual

cHaptEr 9: part rEplacEMEnt gUidE

9.16 foot pEdalS rEplacEMEnt

1) Pull up on the rubber pad on top of the plastic pedal to expose the pedal screws (Figure A).
2) Remove the 4 Phillips screws that hold the plastic foot pedal to the foot plate (Figure B).
figUrE a
figUrE b
3) Remove the plastic foot pedal (Figure C).
figUrE c
4) Reverse Steps 1-3 to install a new foot pedal.
5) Test the Elliptical Trainer as outlined in Section 8.21.
55