Matrix E7XE-01 Service Manual page 67

cHaptEr 9: part rEplacEMEnt gUidE
9.19 rollEr rEplacEMEnt - continUEd
5) Remove the 3 screws holding the top roller track in place (Figure H).
6) Remove the screw holding the roller to the crank arm (Figure I).
figUrE H
7) Remove the roller from the crank arm using the roller puller available from Matrix (Figure J).
figUrE i figUrE j
8) Reverse Steps 1-7 to install a new roller.
9) Test the Elliptical Trainer for function as outlined in Section 8.21.
63