Accu-Chek Mobile User Manual page 130

14
Messages and problems
E-6
Do not apply blood or control
solution to the test area until the
prompt Apply drop is displayed.
Repeat the test.
E-8
Move to a place where the
temperature is at most +40 °C
and wait for the temperature of
the meter to adjust to this
temperature.
128
E-7
If the error message reappears
after turning the meter on again:
Contact the customer support
and service centre (see
page 134).
E-9
Insert two new batteries.
E-8
Move to a place where the
temperature is at least +10 °C
and wait for the temperature of
the meter to adjust to this
temperature.