Accu-Chek Mobile User Manual page 74

7
Analysing test results on the PC
4
to select Data transfer
Use
or
Reports.
Press .
i
You only need special diabetes management software to analyse stored test results if you would like to
use the data transfer function. For transferring data between Continua Certified
also need to install a PHDC driver (PHDC = Personal Health Device Class) on your PC. Whether you need
a PHDC driver depends on the diabetes management software used.
Viewing a report (Accu-Chek Mobile report) with your Internet browser does not require any additional
software.
72
Depending on the default you select, the analysis of the test results is
started with Data transfer or Reports. To analyse the data by means
of Data transfer, you need a special software product for your PC (for
example, Accu-Chek 360° Diabetes Management System or
Accu-Chek Smart Pix software). For more information, contact the
customer support and service centre (see page 134).
If you already have a software product for transferring and analysing
test results, the software may not recognise more recent meters and
therefore the test results may not be able to be transferred. You may
need a more recent version of your software. In this case, contact the
customer support and service centre (see page 134).
You cannot perform a test while test results are being transferred.
products, you may
®