Accu-Chek Mobile User Manual page 93

Test result announcement after a test
In the acoustic mode, when a test result is displayed following a blood glucose test, the meter also
announces it as a series of beeps. The test result is not announced as an entity, but is broken down into
individual digits.
Examples:
The test result 7.6 mmol/L is announced as 0 – 7 – decimal point – 6.
Each digit is represented by the corresponding number of beep tones, for example, 4 beep tones for the
number 4 ( ). Zero is represented by 1 long beep tone (
The decimal point of a test result is announced by 1 very short beep tone ( ).
Test results which are lower than 0.6 mmol/L and are displayed as
0 – 0 – decimal point – 0.
Test results which are higher than 33.3 mmol/L and are displayed as
9 – 9 – decimal point – 9.
The meaning of the symbols
page 36.
The test result is announced three times in succession. Each announcement is preceded by 2 short beep
tones ( ) as an introduction. Therefore, altogether you hear: test result test result test result.
Symbols, such as or
acoustically.
If you turn the meter off using the power button ( ) while the test result is being announced acoustically,
the announcement is interrupted and 1 long beep tone will sound (
is explained in the chapter Symbols instead of test results on
and
, which are displayed together with the test result are not announced
Acoustic mode
).
are announced acoustically as
are announced acoustically as
).
8
91