Accu-Chek Mobile User Manual page 24

3
Preparing the finger pricker
kim_manual_0390
1
1
Take a new lancet drum 1.
You can recognise used lancet
drums by the red stripe 2.
3
Insert the new lancet drum,
white end first.
The lancet drum is properly
inserted when it is completely
inside the finger pricker and only
the front edge protrudes.
22
2
Remove the cap from the finger
pricker.
kim_manual_0410
Place the cap back on again.
The cap is on correctly when it is
pushed back as far as it will go,
and you hear and feel it click into
place.
2 W
You must not insert the lancet
drum into the finger pricker
and simultaneously press the
release button or hold the
finger pricker with the release
button resting on a surface
such as a table top. This could
release a lancet and
inadvertently cause injury.
H
4
The cap can only be easily
placed on up to the stop
position when the lancet drum
is completely inside the finger
pricker. Do not use force to
push the cap on. This could
damage the cap and finger
pricker. Instead, correct the
position of the lancet drum.