Nortel DCT1900 Technical Product Manual page 392

Technical Product Manual - DCT1900
Maintenance, Fault Finding Procedures
ERRORS
System List Error
No
Buzzer Data
Error
No
Fixed Phone
book Error
No
User Data Error
No
Initialization Error
No
END
6-10
Initialization data missing or
Yes corrupted. Re-initialize Portable
Telphone.
Ringing cadence data missing
Yes or corrupted. Re-initialize
Portable Telephone.
Fixed phone book data missing or
Yes corrupted. If phone book was loaded, all
data is lost. Re-download phone book.
User data corrupted. All data (preferences) will be
replaced with defaults, speed dial numbers will be
Yes
cleared. This fault occurs only once; after cycling the
power the fault disappears, because defaults are set.
Error occured during initialization process.
Yes
Restart initialization.
1) For all faults correction actions are given.
If after correction a fault re-appears, the
Portable Telphone should be sent for repair.
Maint-DCT1900/R8/mw
© 2000-2005