Nortel DCT1900 Technical Product Manual page 221

<FPGA>.mcs Version Download Procedure
1. At the DLU> prompt in the terminal window, press df and return. Should see
"Erasing download area, blocks 3,4,5 and "Transmit <fpga>.mcs file now, CTRL-C to abort"
and "DLU".
2. Press File:Send File in the Tera Term application; select the <FPGA>.mcs file you want to
download and press open. A pop up window should display the filename you are sending and
the bytes being transferred. When the file is completely transferred (~4 min.), the window will
disapper and the board should reset. On the display you should see ">>>Boot DLU[PBX type]
Ver: Application version H/W:FPGA version......." and "DLU".
At this point, if both of these procedures have completed without error, you have successfully
upgraded the DLU board.
Install-DCT1900/R8/mw
© 2000-2005
Installation Instructions, AWS1024 Meridian, AWS1025 Norstar, AWS1026 Lucent
Technical Product Manual - DCT1900
15-3