Nortel DCT1900 Technical Product Manual page 230

Technical Product Manual - DCT1900
Installation Instructions, Base Station – KRC 101 1371
2. Adhere plastic spacer to the mounting clip.
3. Assemble the mounting clip to the ceiling bracket.
From the bracket side, screw in the 6-32 screws with a #6 washer. Place mounting clip over
screws and lock each screw in place with a 6-32 lock nut and a #6 washer. DO NOT
OVERTIGHTEN.
16-8
Fig. 16-3 Cut Mounting Clip
Fig. 16-4 Mounting Clip with Plastic Spacer
Fig. 16-5 Ceiling Bracket
Install-DCT1900/R8/mw
© 2000-2005