Nortel DCT1900 Technical Product Manual page 136

Technical Product Manual - DCT1900
Configuration Directions, Relation between Parts
Power Supplies
Items Modular Cabinet
Power Supply Unit
Cables
Items Modular Cabinet
CLU/MDF Cable or CLU/MDF
Cable, Long
CLU/MCCB Power Cable
DTU/PBX Cable set (E1-
CCS or CAS)
DTU/PBX Cable Set
(T1-CCS or CAS)
LTU Cable Set
DLU Cable Set
PC Cable
Printer Cable
CPU/SDB Cables
SMS Cable
Mains Power Cord
6-2
Connects
Mains to Modular Cabinet.
1 set per CLU or SLU
1 per CLU or SLU
1 per DTU
1 per DTU
1 per 3 LTUs
1 per 2 DLUs
1 per system
1 per system
4 per CPU
1 per Unit
1 per Unit
Remarks
Powers system boards and a maximum of 24 Base
Stations.
A set consists of 2 cables with different cable clamp
positions. Normal version is 16 ft. Long version is 82 ft.
Connects 8 Base Stations to one 66 block.
Only when Base Stations are powered via the cabinet.
A set consists of 2 cables with different cable clamp
positions.
One cable with two connectors for two circuits.
Connects 24 extensions to one 66 block.
Connects 48 extensions to one 66 block.
Part of the sync port installation set
Comes with SMS system
Comes with power supply kit
Config-DCT1900/R8/mw
© 2000-2005