Hapter Base Stations; Base Station - Krc 101 1371 - Nortel DCT1900 Technical Product Manual

C 2
HAPTER
Base Stations
2.1

Base Station - KRC 101 1371

**To order a complete Base Station, use Part Number: DB600-001**
Compliance to Regulations and Standards
PWT standard
PWT(E) standard
ANSI standard
UTAM standard
Safety Standard
Emissions Standard
Environmental
Temperature
Operating
Storage
Relative humidity
Operating
Storage
General Specifications
Powering method
Size
Weight
Material Cover
Color Cover
Operating voltage
Power Consumption
Transmitter Radio Specifications
All specifications mentioned here are measured at the RF connectors located next to the
antennas.
RF carriers
Unlicensed:
Frequency band
Center frequency stability
Modulation method
Power spectrum
Peak output power at
RF–connector
Output Spurious
Harmonics
Typical RF output impedance
Specs-DCT1900/R8/mw
© 2000-2005
: Parts 6,7,10
: Interoperability standard
: C63.17
: LVP
: UL60950
: FCC parts 15
: -31 to 169°F (-35 to 76°C)
: -40 to 158°F (-40 to 70°C)
: 15 to 90%, non condensing
: 5 to 95%, non condensing
: Centrally from the Radio Exchange, or using 48V external
power supply or a DC adapter
: 7.875" x 6.5""x 1.97" (200 x 165 x 50mm)
: 1lb. 2.5oz. (525g)
: ABS molded plastic
: light beige (NCS 1502–B)
: 21 to 56 Vdc
: maximum power consumption shall be less than 6W
Fc(MHz) = F2 - C x 1.25MHz, Where C = 0,1,2,3,4,5,6,7
F2 = 1.929375GHz
: 1850 to 1990 MHz
: "10 ppm (crystal controlled)
: π/4 DQPSK
: π/4 DQPSK β/∝ = 0.5 RCC1
: 3 to 19.5 dBm
: as per ANSI C63.17 and ANSI C63.4
as per ANSI C63.17 and ANSI C63.4
: 50
Technical Product Manual - DCT1900
Product Specifications, Base Stations
2-1