4. Assemble the ceiling clips to the bracket.
a. Twist ceiling clip clockwise into the bracket until it bottoms out on the bracket.
b. Twist ceiling clip counterclockwise less than 1/2 turn to the orientation shown below.
5. Clip this assembly into the base station as shown. Disregard the arrows and "top"
embossments.
Fig. 16-8 Ceiling Bracket with Ceiling Clips attached to Base Station
Install-DCT1900/R8/mw
© 2000-2005
Fig. 16-6 Attaching Ceiling Clips to the Ceiling Bracket
Fig. 16-7 Ceiling Clips Attached to Ceiling Bracket
Technical Product Manual - DCT1900
Installation Instructions, Base Station – KRC 101 1371
16-9