Length Control; Length 1, Length 2 Programming Instructions - Datalogic magellan 3300HSI Product Reference Manual

References

Length Control

Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable minimum and maximum
length.
Configuring Fixed Length Decoding:
1. Scan the START/END bar code.
2. Scan the Fixed Length Decoding bar code for the desired symbology.
3. Scan the START/END bar code.
4. Set Length 1 to the first fixed length by following the
5. Set Length 2 to the second fixed length (or to '00' if there is only one fixed length) by fol-
Configuring Variable Length Decoding:
1. Scan the START/END bar code.
2. Scan the Variable Length Decoding bar code for the desired symbology.
3. Scan the START/END bar code.
4. Set Length 1 to the first variable length by following the
5. Set Length 2 to the second variable length by following the

Length 1, Length 2 Programming Instructions

1. Scan the START/END bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code for the desired symbology.
3. Turn to
4. Scan the START/END bar code
154
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
Instructions below.
lowing the Length 1, Length 2 Programming Instructions
Instructions
below.
ming Instructions
below.
Appendix C, Alpha-Numeric Pad
the length in decimal notation. The number of characters that can be set varies, depend-
ing upon the symbology. Reference the page for your selected symbology to see specific
variables.
Length 1, Length 2 Programming
below.
Length 1, Length 2 Programming
Length 1, Length 2 Program-
and scan the two digits (zero padded) representing
Magellan TM 800i