•
Example: 'F110123456789112345'.
EAN-13 with Code 128 Supplemental
•
Check digit must be included in label data and is assumed to be correct
•
Supplemental data is appended to base label
•
Prefix must be an ASCII character 'F'- total length including prefix must be greater or equal to 20 (code 128
Supplemental codes are variable length having a minimum of 2 data characters)
•
Characters immediately following base label must be of the form '8100', '8101' or '8102'
•
Example: 'F11012345678918100000951'
Code 39
•
Check character must be included in label data.
•
Label length including start, stop and check characters and excluding prefix character must meet require-
ments imposed by the main scanner's fixed or variable label length control for this symbology type.
•
Start and stop characters "*" must be included in label.
•
Prefix must be an ASCII character '*'.
•
Example : '**Code 39.TEST*'.
Code 39-Pharmacode
•
Check character must be included in label data.
•
Label length including start, stop and check characters and excluding prefix character must meet require-
ments imposed by the main scanner's fixed or variable label length control for this symbology type.
•
Start and stop characters "*" must be included in label.
•
Prefix must be an ASCII character 'p'.
•
Example: 'p*123456789*'.
I 2 of 5
•
Check character must be included in label data.
•
Label length including check characters and excluding prefix character must meet requirements imposed by
the main scanner's fixed or variable label length control for this symbology type.
•
Prefix must be an ASCII character 'i'.
•
Example: 'i0123456789'.
192
Magellan
TM
3300HSi