Datalogic magellan 3300HSI Product Reference Manual page 11

USB Connection —
USB cable for the interface type you ordered. Reference
IBM Connection —
IBM cable. Reference
Keyboard Wedge Connection —
board Wedge cable has a 'Y' connection from the scanner. Connect the female to the male end
from the keyboard and the remaining end at the keyboard port at the terminal/PC. Reference
Figure 1
Figure 2. Ports and Connections
Product Reference Guide
Connect the scanner to a USB port on the terminal/PC using the correct
USB installations may require a power connection via an approved
A/C Adapter as shown in
would be the case if the scanner is connected along with a number
of other devices to a non-powered USB hub.
NOTE
Connect the scanner to the IBM port on the terminal/PC using the correct
Figure 1 .
Before connection, turn off power to the terminal/PC. The Key-
b.
1
2
3
1 Connection Bulkhead Cover
2 USB Service Port: On screen
programming tool
3 microSD Slot: Upgrades, imaging,
statistics data
4 Electronic Article Surveillance
(EAS) Antenna Connection Wire
Figure 1
.
Figure 1b or Figure
6
4 5
5 POS Terminal (blue): Label data,
application Host download, Host
commands to scanner
6 Auxiliary Port (yellow): RS-232 hand-
held, EAS interlock, remote camera
button, PIR data
7 Cable Cover
Connecting the Scanner
1c. For example, this
7
3