Datalogic magellan 3300HSI Product Reference Manual page 15

LED and Beeper Indicators — cont.
Table 2. Beeper Functions
BEEPER
INDICATION
Power On Beep Single beep
Good Read Single beep
Indication
Diagnostics Varies (see
for more information)
Programming Varies depending upon the fea-
Mode 
ture(s) being configured.
Indications
Product Reference Guide
INDICATION
Error Codes on page 4
COMMENT
The Power-On Beep indication is a configurable feature
which can be enabled or disabled. When enabled, this beep
Indicates the scanner has finished all its power up tests and is
now ready for operation.
The good read beep indication is configurable. Options
include: Enable/disable, frequency, duration and volume. See
LED and Beeper Indicators on page 24
The Beeper can provide diagnostic feedback if the scanner
discovers a problem during SelfTest.
The Beeper will sound as programming bar code labels are
scanned, indicating progress during scanner configuration.
LED and Beeper Indicators
for more information.
7