Global Prefix/Suffix - Datalogic magellan 3300HSI Product Reference Manual

References

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/
or as a suffix (in a position following the bar code data) as indicated in
Figure 1. Prefix and Suffix Positions
Example: Setting a Prefix
In this example, we'll set a prefix for all symbologies.
1. Determine which ASCII character(s) are to be added to scanned bar code data. In this
2. Scan the START bar code.
3. Scan the SET PREFIX bar code.
4. Reference the
5. Scan the END bar code once to finish the string, then scan END again to exit Program-
NOTE
6. The resulting message string would appear as follows:
Resulting message string output: $12345
152
Prefix Label ID
example, we'll add a dollar sign ('$') as a prefix.
ASCII Character Set
value assigned to the desired character. The corresponding hex number for the '$' charac-
ter is 24. To enter this selection code, scan the '2' and '4' bar codes from
Alpha-Numeric Pad .
ming Mode.
If all 20 characters will be used in the prefix or suffix, do not
scan the END bar code to finish the string. It is done auto-
matically.
Scanned bar code data:12345
AND
OR
00 - 20 Characters (ASCII)
AIM ID Bar Code Data
on the inside back cover of this manual, to find the hex
Figure 1 .
Label ID Suffix
OR...
Appendix C,
Magellan TM 800i