Displaying port mirroring settings
Use the following procedure to display information about the current port
mirroring settings.
Procedure steps
Step
1
Configuring mirror-by-port entries
Use the following procedure to diagnose the system by monitoring/mirroring
a port.
Procedure steps
Step
1
2
Variable definitions
Variable
id
Creating a new mirror-by-port table entry
Use the following procedure to create a new mirror-by-port table entry.
Copyright © 2007, Nortel Networks
.
Configuring and monitoring port mirroring using the CLI 59
Action
To display information about the current port mirroring settings, enter
the following command:
config diag info
Action
To diagnose the system by monitoring/mirroring a port, enter the
following command:
config diag mirror-by-port <id>
The mirror-by-port entry ID is a value of 1 to 383.
To display the current port mirroring settings, enter the following
command:
config diag mirror-by-port <id> info
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—
—End—
Value
The mirror-by-port entry ID (1 to 383).